-
InFocus IN5316HDa - page 1
...
-
InFocus IN5316HDa - page 2
— i — Copyright This publication, including all photographs, illustrations and so ftware, is protected under international copyright laws, with all rights reserved. Neither this manual, nor any of the material contained herein, may be reproduced without written cons ent of the author. © Copyright 2014 Disclaimer The information in this documen ...
-
InFocus IN5316HDa - page 3
— ii — Important Safety Information Important: It is strongly recommended that you read this section carefully before using the projector. These safety and usage instructions will ensure that you enjoy many years of safe use of the projector. Keep this manual for future reference . Symbols Used Warning symbols are u sed on the unit and in this ...
-
InFocus IN5316HDa - page 4
– iii – Projector Installation Notice Place the projector in a hori zontal position The tilt angle of the projector s hould not exceed 15 degre es . In addition, the projector should not be installed in any other way except desktop and ceiling mo unt positions. Otherwise lamp life could decrease dramati cally, and may lead to other unpredic ...
-
InFocus IN5316HDa - page 5
— iv — Power Safety Only use the supplied power co rd. Do not place anything on t he power cord. Place the p ower cord where it will not be in the way of foot traffic. Re move the batterie s from the remote control when storing or not in use for a pr olonged period. Replacing the Lamp Replacing the lamp can be hazardous if done inco ...
-
InFocus IN5316HDa - page 6
– v – Table of Contents GETTING STARTED ........................................................................................................................................................... 1 P ACKING C HECKLIST ................................................................................................................................ ...
-
InFocus IN5316HDa - page 7
— vi — SPECIFICATIONS ............................................................................................................................................................. 51 S PECIFICATIONS ................................................................................................................................................... ...
-
InFocus IN5316HDa - page 8
– 1 – G ETTING S TARTED Packing Checklist Carefully unpack the projector and check that the following items are included: DLP P ROJE CTO R R EMOTE CONTROL ( B ATTERIES NOT INCLUDED ) CD-ROM (T HIS U SER ’ S MANUAL ) QSC VGA CABLE P OWER CORD ( VARIES PER COUNTRY ) S AFETY & WAR RAN TY B OOKLET Contact your dealer immed iately if any items ...
-
InFocus IN5316HDa - page 9
— 2 — Views of Projector Parts Front-angled View I TEM L ABEL D ESCRIPTION S EE PAGE : 1. IR receiver Receives the IR signals from t he remote control. 7 2. Lens Projection Lens. 3. Focus ring Focuses the projected ima ge. 17 4. Zoom ring Enlarges the projected ima ge. 5. Elevator foot Adjusts level of projector. 14 6. Function keys See Top vie ...
-
InFocus IN5316HDa - page 10
– 3 – Top view — On -screen Display (OSD) buttons I TEM L ABEL D ESCRIPTION S EE PAGE : 1. MENU Open and exit OSD menu s. 20 2. ◄ (Left cursor) Navigate and change settings in t he OSD. Quick Menu – For Volume 3. ▲ (Up cursor) Navigate the OSD. Quick Menu – For Keystone. 4. ▼ (Down cursor) Navigate the OSD. Quick Menu – For Keysto ...
-
InFocus IN5316HDa - page 11
— 4 — Rear view I TEM L ABE L D ESCRIPTION S EE PAGE : 1. VGA1 Connect the RGB CABLE from a comput er or a video enabled device. 2. AUDIO 1 Connect the AUDIO CABLE from an input device. 3. POWER butto n Turns the projector on or of f (main power switch must be turned on first). 12 4. VGA2 Connect the RGB CABLE from a comput er or a video enable ...
-
InFocus IN5316HDa - page 12
– 5 – 17. SERVICE For service use. 18. IR receiver Receives the remote control IR signal. 7 19. RS-232 Connects RS-232 se rial port cable for remote control. 20. AUDIO 3 (L and R) Connect the AUDIO CABL E from an inp ut device. 21. Security Lock Connect a security lock system to the projector and at tach to a permanent object. 22. Safety Cable ...
-
InFocus IN5316HDa - page 13
— 6 — Bottom view I TEM L ABEL D ESCRIPTION S EE PAGE : 1. Leveling/Elevator Feet Raise and rotate the feet t o change and fine tune the angle of the projector. 14 2. Ceiling support holes Only use with an InFocus ceiling mount system (p/n PRJ-MNT-UNIV). See your InFocus dealer or go t o www.infocusstore.com . Note: If you are installing the pr ...
-
InFocus IN5316HDa - page 14
– 7 – Remote Control Parts Important: 1. Avoid using the projector with bright fluorescent lighting turned on. Certain high-frequency fluorescent lights can disrupt remote control operation. 2. Be sure nothing obstructs the path between the remote control and the projector. If the path between the remote control and the projector is obstructed, ...
-
InFocus IN5316HDa - page 15
— 8 — I TEM L ABEL D ESCRIPTION S EE PAGE : 1. Power ON Turn the projector on . 12 2. LED indicator Only lights when the remote keys are pressed. 3. Display Mode Choose a suitable preset mode for u sa ge environment. 4. Contrast Display the Contrast setting bar an d use the right and left keys to adjust. 5. Brightness Display the Brightness set ...
-
InFocus IN5316HDa - page 16
– 9 – S ETUP AND O PERATION Inserting the Remote Control Batteries 1. Remove the battery compartment cover by sliding the cover in the direction of the arrow. 2. Insert batteries (not included) as shown in the illustration. 3. Replace the cover. Caution: 1. Only use AA batteries (Alkaline batteries are recommended). 2. Dispose of used batteries ...
-
InFocus IN5316HDa - page 17
— 10 — Installing or Removing the Optional Lens Cauti on: Do not shake or place excessive pressure on the projector or the lens components as the projector and lens components contain precision parts. Before removing or installing the lens, be sure to turn off the projector, wait until the cooling fans stop, and turn off the main power ...
-
InFocus IN5316HDa - page 18
– 11 – Installing the New Lens 1. Align the notches and correctly position the electrical contact pad as shown in the picture. Note: Pin of IRIS should be in the direction as shown in the picture. 2. Rotate the lens clockwise until you feel it click into place. ...
-
InFocus IN5316HDa - page 19
— 12 — Starting and Shutting do w n the Projector 1. Remove the lens cap. 2. Connect the power cord to the projector. Connect the other end to a wall outlet. Verify that the AC Power switch on the back of the uni t is turned on. When connected, the PWR LED will turn solid Red. 3. Turn on the lamp by pressing the “ ” button on the rear of th ...
-
InFocus IN5316HDa - page 20
– 13 – 4. If mor e than one input device is connected, press the SOURCE button and use ▲▼ to scroll among devices. DVI : Digital Visual Interface HDMI : High Definition Multimedia Interfac e (HDMI) D isplay Port : DisplayPort input VGA 1 / 2 : Analog RGB 1 / 2 BN C : Analog / serial digital interface video inputs Com ...
-
InFocus IN5316HDa - page 21
— 14 — Adjusting the Projector L evel Take note of the following when setting up the projector: The projector table or stand should be level and sturdy . Position the projector so that it is perpendic ular to the screen. Remove and discard the foam spac ers on the rear leveling f ee t before adjusting the projection angle. Ensur ...
-
InFocus IN5316HDa - page 22
– 15 – Adjusting Projected Imag e Position Using Shift The Shift feature provides a lens shift function that can be used to adjust the position of the projected image either horizontally or vertica lly within the range detailed below. Shift is a unique system that provi des lens shift while maintaining a much higher ANSI contrast ratio than tra ...
-
InFocus IN5316HDa - page 23
— 16 — For IN5312a (XGA) Adjusting the horizontal image position With the lens in the center posit ion the horizontal image pos ition can be adjusted to the left or right by up to a maximum of 5% of the image width. Note that the maximum horizontal image height adjustment can be limited by the vert ical image position. For example it is not pos ...
-
InFocus IN5316HDa - page 24
– 17 – Shift Range Diagra m For IN5316 HD a (1080P) For IN5312 a (XGA) Max H image shift=0% offset Max W image shift=Wx5% When Wx5%, Max image shift=-20% offset When 0% offset, Max image shift=Wx0% Wx5% Wx5% 0% offset - 20 % offset W Max H image shift=10% offset Max W image shift=Wx5% When Wx5%, Max image shift=-10% offset When 10% offset, Max ...
-
InFocus IN5316HDa - page 25
— 18 — Adjusting Zoom, Focus and Keystone 1. Use the Z oom ring to resize the projected image and screen size. 2. Use the F ocus ring to sharpen the projected image. 3. Use the KEYSTONE buttons (on the projector or the remote control) to correct image trapezoid ing (wider top or bottom). Remote control and OSD panel 4. The keystone control appe ...
-
InFocus IN5316HDa - page 26
– 19 – Adjusting the Volume 1. Press the Volume buttons (on the projector or the remote control). Th e volume control appears on the display. 2. Use the Vol +/- buttons (on the projector or the remote control). 3. Press the MUTE button to turn off the audio (This feature is only avail able on the remote). ...
-
InFocus IN5316HDa - page 27
— 20 — O N -S CREEN D ISPLAY (OSD) M ENU S ETTINGS OSD Menu Controls The projector has an OSD that lets you make image adjustments and change various settings. Navigating the OSD You can use the remote control cursor buttons or the projector keypad to navigate and make changes to the OSD. 1. To enter the OSD, press the MENU button. 2. There are ...
-
InFocus IN5316HDa - page 28
– 21 – Setting the OSD Language Set the OSD language to your preference before continuing. 1. Press the MENU button. Press the cursor ◄► button to n avigate to Settings 1 . Press the cursor ▲▼ button to move to the Ad vanced 1 menu. 2. Press (Enter) / ► to enter the Advanced 1 sub menu. Press the cursor ▲▼ button until Language is ...
-
InFocus IN5316HDa - page 29
— 22 — OSD Menu Overview Use the following illustration to quickly find a setting or determine the range for a setting. M AIN M ENU S UB M ENU S ETTINGS Image Display Mode Presentation, Bright, Gam e, Movie, TV, sRGB, Blackb oard, User Brightness 0~100 Contrast 0~100 Computer Horizontal Position -50 ~5 0 (depending on A utolock) Vertical Positi ...
-
InFocus IN5316HDa - page 30
– 23 – M AIN M ENU S UB M ENU S ETTINGS Settings 1 Source Source Reference Input Source Select (IR/Keypad) Projection Normal, Real, Ceiling, Real+Ceiling Aspect Ratio Fill, 4:3, 16:9, Letter Box, Native, 2.35:1 Keystone -40~40 Digital Zoom - 10~10 Audio Volume 0~10 Mute Off, On Advanced 1 Language English, Français, Deutsch, Español, Portugu? ...
-
InFocus IN5316HDa - page 31
— 24 — M AIN M ENU S UB M ENU S ETTINGS Settings 2 Auto Source Off, On No Signal Power Off 0~ 180 Auto Power On Off, On Lamp Mode ECO , Normal, Boost Reset All Status Active Source Video Information Lamp Hours (ECO, Normal, Boost) Software Version Serial Number Advanced 1 Menu Position Center, Down, Up, Left, Right Translucent Menu 0%, 25%, 50% ...
-
InFocus IN5316HDa - page 32
– 25 – Image Menu Attention ! When image options are changed, the Dis play Mode changes to User. Press the MENU button to open the OSD menu. Press ◄► to move to the Image Menu . Press ▲▼ to move up and down in the Image menu. Press ◄► to enter and change values for settings. I TEM D ESCRIPTION Display Mode Press ◄► to enter and ...
-
InFocus IN5316HDa - page 33
— 26 — Computer Menu Press the MENU button to open the OSD menu. Press ◄► to move to the Image menu. Press ▲▼ to move to the Computer menu and then press Enter or ►. Press ▲▼ to move up and down in the Computer menu. I TEM D ESCRIPTION Horizontal Position Press ◄► to enter and adjust the display position to left or right. Vert ...
-
InFocus IN5316HDa - page 34
– 27 – Advanced Feature Press the Menu button to open the OSD menu. Press ◄► to move to the Image menu. Press ▼▲ to move to the Advanced menu and then press Enter or ►. Press ▼▲ to move up and down in the Advanced menu. I TEM D ESCRIPTION Brilliant Color Press ◄► to enter and adjust the Brillia nt Color value. Sharpness Press ...
-
InFocus IN5316HDa - page 35
— 28 — Color Manager Press the Menu button to open the OSD menu. Press ◄► to move to the Image menu. Press ▼▲ to move to the Color Manager menu and then press Enter or ►. Press ▼▲ to move up and down in the Color Manager menu. I TEM D ESCRIPTION Red Select to enter the Red Col or Manager. Press ◄► to adjust the Hue, Saturatio ...
-
InFocus IN5316HDa - page 36
– 29 – Settings 1 Menu Press the MENU button to open the OSD menu. Press ◄► to move to the Settings 1 menu. Press the ▲▼ to move up and down in the Settings 1 menu. Press ◄► to enter and change values for settings. I T EM D ESCRIPTION Source Press (Enter) / ► to enter the Source m enu. Reference input Source s elect (IR / Keypad). ...
-
InFocus IN5316HDa - page 37
— 30 — Audio Press the Menu button to open the OSD menu. Press ◄► to move to the Settings 1 menu. Press ▼▲ to move to the Audio menu and then press Enter or ►. Press ▼▲ to move up and down in the Audio menu. I TEM D ESCRIPTION Volume Press ◄► to enter and adjust the audio v olume. Mute Press ◄► to enter and turn on or off ...
-
InFocus IN5316HDa - page 38
– 31 – Advanced 1 Feature Press the Menu bu tton to open the OSD menu. Press ◄► to move to the Settings 1 menu. Press ▲▼ to move to the Advanced 1 menu and then press Enter or ►. Press ▲▼ to move up and down in the Advanced 1 menu. Press ◄► to enter and change values for setting. I TEM D ESCRIPTION Language Press ◄► to ent ...
-
InFocus IN5316HDa - page 39
— 32 — 3D Setting I TEM D ESCRIPTION 3D Press ◄► to enter and select a diff erent 3D mode. 3D Sync Invert Press ◄► to enter and enable or disabl e 3D Sync Invert. 3D Format Pr ess ◄► to enter and enable or disabl e different 3D Formats. Note: 1. By default, the 3D OSD menu optio ns will be grayed out until a 3D source is detected. W ...
-
InFocus IN5316HDa - page 40
– 33 – Advanced 2 Feature Press the Menu button to open the OSD menu. Press ◄► to move to the Settings 1 menu. Press ▲▼ to move to the Advanced 2 menu and then press Enter or ►. Press ▲▼ to move up and down in the Advanced 2 menu. Press ◄► to enter and change values for setting. I TEM D ESCRIPTION Test Pattern Press ◄► to ...
-
InFocus IN5316HDa - page 41
— 34 — Settings 2 Menu Press the MENU button to open the OSD menu. Press ◄► to move to the Settings 2 menu. Press ▲▼ to move up and down in the Settings 2 menu. I TEM D ESCRIPTION Auto Source Press ◄► to enter and enable or disable automatic source dete ction. No Signal Power Off (min.) Press ◄► to enter and enable or disabl e a ...
-
InFocus IN5316HDa - page 42
– 35 – Status Press ▲▼ to move up and down in the Settings 2 menu. Select the Status menu and press Enter or ► to enter. I TEM D ESCRIPTION Active Source Displays the active source. Video Information Displays resolution/video information f or RGB source and color standard for Video source. Lamp Hours Lamp hour used informatio n is display ...
-
InFocus IN5316HDa - page 43
— 36 — Advanced 1 Feature Press the Menu button to open the OSD menu. Press ◄► to move to the Settings 2 menu. Press ▲▼ to move to the Advanced 1 menu and then press Enter or ►. Press ▲▼ to move up and down in the Advanced 1 menu. Press ◄► to enter and change values for setting. I TEM D ESCRIPTION Menu Position Press ◄► to ...
-
InFocus IN5316HDa - page 44
– 37 – Lamp Hour Reset Please refer to Resetting the Lamp Timer on page 44 to reset the lamp hour counter. Network I TEM D ESCRIPTION Network State Displays the network conn ection status. DHCP Press ◄► to turn DHCP On or Off. Note: If you select DHCP Of f, complete the IP Address, Subnet Mask, Gateway, and DNS fields. IP Address Enter a va ...
-
InFocus IN5316HDa - page 45
— 38 — Controlling the projector remotely To control your projector r emotely, use one of the supporte d external devices listed bel ow, or use RS232 using a TelNet utility, such a s HyperTerminal. Crestron is a registered trademark of C restron Electronics, Inc. of the United States. Extron is a registered trademark of Extron Electroni ...
-
InFocus IN5316HDa - page 46
– 39 – Advanced 2 Feature Press the Menu button to open the OSD menu. Press ◄► to move to the Settings 2 menu. Press ▲▼ to move to the Advanced 2 menu and then press Enter or ►. Press ▲▼ to move up and down in the Advanced 2 menu. Press ◄► to enter and change values for setting. I TEM D ESCRIPTION Sleep Timer (min) Press ◄? ...
-
InFocus IN5316HDa - page 47
— 40 — Source Filter Press the EN TER button to enter the Source Filter sub menu. I TEM D ESCRIPTION DVI Press ◄► to enter and enable or disabl e the DVI source. HDMI Press ◄► to enter and enable or disabl e the HDMI source. DisplayPort Press ◄► to enter and enable or disabl e the DisplayPort source. VGA1 Press ◄► to enter and e ...
-
InFocus IN5316HDa - page 48
– 41 – M AINTENANCE AND S ECURITY Replacing the Projection La mp The projection lamp should be replaced when it burns out. Be sure to use the InFocus lamp module designed for this projector. You can order new lamps from www.infocusstore.com (in select areas), your retailer or your dealer. Only genuine InFocus lamps are tested for use in this pr ...
-
InFocus IN5316HDa - page 49
— 42 — 4. Loosen the captive screw on the lamp cover . 5. Pull up and remove the cover. 6. Use a screwdriver to loosen the two captive screws from the lamp module. 7. Pull out the lamp module. ...
-
InFocus IN5316HDa - page 50
– 43 – 8. Reverse steps 1 to 7 to install the new lamp module. While installing, align the lamp module with the connector and ensure it is level to avoid damage. Note: The lamp module must sit securely in place and the lamp connector must be connected properly before tightening the screws. ...
-
InFocus IN5316HDa - page 51
— 44 — Resetting the Lamp Timer After replacing the lamp, you should reset the lamp hour timer to zero. Refer to the following: 1. Press the MENU button to open the OSD menu. 2. Press the ◄► button s to move to the Settings 2 menu. Press the ▼ button to move down to Advanced 1 and press enter . 3. Press the ▼▲ button s to move down to ...
-
InFocus IN5316HDa - page 52
– 45 – Cleaning the Projector Cleaning the projector to remove dust and grime will help ensure trouble-free operation. Warning: 1. Be sure to turn off and unplug the projector at leas t 60 minutes before cleaning. Failure to do so could result in a severe burn. 2. Use only a dampened cloth when cleaning. Do not allow water to enter the ventilat ...
-
InFocus IN5316HDa - page 53
— 46 — T ROUBLESHOOTING Common Problems and S olutions These guidelines provide tips to deal with problems you may encounter while using the projector. If the problem remains unsolved, contact InFocus at www.infocus.com/support . Often the problem is traced to something as simple as a loose connection. Check the following before proceeding to p ...
-
InFocus IN5316HDa - page 54
– 47 – LED Error Messages Error Code Messages PWR LED TEMP LED READY LED Overheating Off Solid Red Off Thermal break Flashing Red 4x Off Off Lamp strike fail Flashing Red 5x Off Flashing Red 1x Lamp Short circuit in output detected Flashing Red 5x Off Flashing Red 2x Lamp End of lamp life detected Flashing Red 5x Off Flashing Red 3x Lamp did no ...
-
InFocus IN5316HDa - page 55
— 48 — Problem: The image is reversed C h e c k t h e P r o je c t i o n s e t t i n g o n t h e S e t t in gs 1 m e n u o f t h e O S D . Problem: The image is streaked 1. Se t t h e F r e q u e n c y and T r a c k i n g s e t t i n g s o n t h e I m a g e - > C o m p u t e r me n u o f t h e O S D t o t h e d e f a u l t s e t t i n g s . ...
-
InFocus IN5316HDa - page 56
– 49 – Audio Problems Problem: There is no sound 1. Ad j u s t t h e v o l u m e o n t h e r e m o t e c on tr o l . 2. Ad j u s t t h e v o l u m e o f t h e a u d i o s o u r c e . 3. C h e c k t h e a u d i o c a b l e c o n n e c ti o n . 4. D i s c o n n e c t a u d i o o u t c a b l e . 5. T e s t t h e s o u r c e a u d i o o u t p u t w ...
-
InFocus IN5316HDa - page 57
— 50 — HDMI Q & A Q. What is the difference between a “Standard” HDMI cable and a “High - Speed” HDMI cable? R e c e n t l y , HD M I L i c e n s i n g , L L C a n n o u nc e d t h a t c a b l e s w o u l d b e t e s t e d a s S t a n d ar d o r H i g h - S p e e d c a b l e s . ˙ S t a n d a r d ( o r “ c a t e g o r y 1 ” ) H ...
-
InFocus IN5316HDa - page 58
– 51 – S PECIFICATIONS Specifications Model IN531 2a IN5316HDa Display type T I D M D X G A 0 . 7 ” T I D M D 1 0 8 0 P 0 . 6 5 ” Native Resolution 1024x768 1920x1080 Projection distance (standard lens) 1.5 meters ~ 7 meters ( 4. 92 ft ~ 22.97 ft ) Projection screen size (standard lens) 37.3" ~ 215 " ( 95cm ~ 546 cm ) 35.1”~205? ...
-
InFocus IN5316HDa - page 59
— 52 — Projection Distance vs. Projection Si ze (1080P) Projection Distance and Size Table Standard projection lens: TR: 1.54– 1.93; offset=10% IN5316HDa T ELE W IDE Distance (m/inch) 1.71/ 67.3 3.42/ 134.6 4.27/ 168.2 8.55/ 336.4 1.70/ 67.1 3.41/ 134.2 6.82/ 268.4 10.23/ 402.7 Diagonal (inch/ft) 40/ 3.3 80/ 6.7 100/ 8.3 200/ 16.7 50 /4.2 100 ...
-
InFocus IN5316HDa - page 60
– 53 – Projection Distance vs. Projection Si ze (XGA) Projection Distance and Size Table Standard projection lens: TR: 1.6~2; offset=0% IN5312a T ELE W IDE Distance (m/inch) 1.63/ 64 3.25/ 128 4.06/ 160 8.13/ 320 1.63/ 64 3.25/ 128 6.50/ 256 9.75/ 384 Diagonal (inch/ ft) 40/3.3 80/6.7 100/8.3 200/16.7 50/ 4.2 100/8.3 200/16.7 300/25 Keystone Co ...
-
InFocus IN5316HDa - page 61
— 54 — Timing Mode Table The projector can display multiple resolutions. The following table outlines the resolutions that can be displayed by the projector. S IGNAL R ESOLUTION H-S YNC (KH Z ) V-S YNC (H Z ) C OMPOSITE / S-V IDEO VGA 1/2 /RGBHV ( ANALOG ) HDMI ( DIGITAL ) DP ( DIGITAL ) NTSC — 15.734 60.0 O — — — PAL/SECAM — 15.625 5 ...
-
InFocus IN5316HDa - page 62
– 55 – S IGNAL R ESOLUTION H-S YNC (KH Z ) V-S YNC (H Z ) C OMPOSITE / S-V IDEO VGA 1/2 /RGBHV ( ANALOG ) HDMI ( DIGITAL ) DP ( DIGITAL ) HDTV 720p 37.5 50.0 — O O O 720p 45.0 60.0 — O O O 1080i 33.8 60.0 — O O O 1080i 28.1 50.0 — O O O 1080p 27 24.0 — O O O 1080p 28.13 25.0 — O O O 1080p 33.75 30.0 — O O O 1080p 67.5 60.0 — O O ...
-
InFocus IN5316HDa - page 63
— 56 — Projector Dimensions ...
-
InFocus IN5316HDa - page 64
– 57 – R EGULATORY C OMPLIANCE FCC Warning This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment genera ...
-
InFocus IN5316HDa - page 65
— 58 — A PPENDIX I Serial Communication The following table describes the serial communication configuration that should be used when interfacing to CLI via the serial port. Windows HyperTerminal or ProComm are two tools that can be used to send CLI commands across the serial port. Setting Value Bits per second 19200 Data bits 8 Parity None Sto ...
-
InFocus IN5316HDa - page 66
– 59 – No Function Command RW Min Max Default Step Parameter 13 Current Source SRC RW 0 20 0 1 0 = Computer1 1 = Computer 2 3 = RGBHV 4 = HDMI1 7 = DisplayPort1 9 = Component1 11 = Composite 12 = S-Video 20 = DVI 14 Digital Zoom DZM RW - 10 10 0 1 Digital Zoom 15 Error Condition ERR R 0 9 0 1 0:No error 1:Lamp not lit after 5 Attempts 3:Lamp we ...
-
InFocus IN5316HDa - page 67
— 60 — No Function Command RW Min Max Default Step Parameter 27 Total Projection Hours (lamp1+lamp2+…) LMT R 0 9999 0 1 Displays the total number o f hours the projector has bee n in operation (all lamps). 28 Lamp Life LIF R n/a 1500 1500 n/a Lamp life 1500 29 Lamp Power Select High power (Boost) / Low power (Normal) / Eco power (Eco) IPM RW ...
-
InFocus IN5316HDa - page 68
– 61 – No Function Command RW Min Max Default Step Parameter 41 Presets PST RW 0 8 source Specific 1 Display mode 0:Presentation 1:Bri ght 2:Game 3:Movie 4:TV 5:sRGB 6:Blackboard 7:User1 8:User2 42 Projector Firmware Ver. FVS R string LX737-692IF-DPEXX 43 Projector Info menu PRI W 1 1 1:Display Status Menu 44 Projector Model MDL R string XGA: I ...
У вас вопрос, касающийся InFocus IN5316HDa?
Воспользуйтесь формуляром, находящимся ниже
Если с помощью найденной инструкции Вы не решили свою проблему с InFocus IN5316HDa, задайте вопрос, заполнив следующий формуляр. Если у какого то из пользователей была похожая проблема с InFocus IN5316HDa со всей вероятностью он захочет поделиться методом ее решения.