-
Weslo WLTL29014 - page 1
Model No. WLTL29014 Serial No. Write the serial number in the space above for future reference. Serial Number Decal QUESTIONS? If you have questions, or if there are missing parts, we will guaran- tee complete satisfaction through direct assistance from our factory. TO AVOID UNNECESSARY DELAYS, PLEASE CALL DIRECT TO OUR TOLL-FREE CUSTOMER HOT LINE. ...
-
Weslo WLTL29014 - page 2
TABLE OF CONTENTS IMPORTANT PRECAUTIONS ............................................................. 2 BEFORE YOU BEGIN ................................................................... 4 ASSEMBLY ........................................................................... 5 OPERATION AND ADJUSTMENT ............................................... ...
-
Weslo WLTL29014 - page 3
14. Never move the walkingbelt while the power must be able to safely lift 45 pounds (20 kg) in is turned off. Do not operate the treadmill if order to raise, lower, or move the treadmill. the power cord or plug is damaged, or if the treadmill is not working properly. (See BEFORE YOU BEGIN on page 4 if the tread- mill is not working properly.) 15. ...
-
Weslo WLTL29014 - page 4
BEFORE YOU BEGIN Thank you for selecting the WESLO ® CADENCE 340 CS treadmill. The CADENCE 340 CS combines advanced technology with innovative design to let you enjoy an excellent form of cardiovascular exercise in the convenience and privacy of your home. And when you're not exercising, the CADENCE 340 CS can be folded up, requiring less tha ...
-
Weslo WLTL29014 - page 5
ASSEMBLY Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not dis- pose of the packing materials until assembly is completed. In addition to the included allen wrench, assembly requires a phillips screwdriver , an adjustable wrench ©_ and scissors _- --_. Note: The underside of the treadmill wa ...
-
Weslo WLTL29014 - page 6
3. Hold the Console Base (87) near the right Handrail (4). Make a loop with the indicated plastic tie,and insert the two Wires (53) through the loop. Pull out just enough of the Wires to connect them to the two connectors in the Console Base (87). Plug the red connector into the corre- sponding connector in the Console Base. The connectors should s ...
-
Weslo WLTL29014 - page 7
OPERATION AND ADJUSTMENT THE PERFORMANT LUBE TM WALKING BELT Your treadmill features a walking belt coated with PERFORMANT LUBE TM, a high-performance lubricant. IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking plat- form. Such substances will deteriorate the walking belt and cause excessive wear. HOW TO ...
-
Weslo WLTL29014 - page 8
DIAGRAM OF THE CONSOLE Monitor Displays STEP BY STEP INSTRUCTIONS I _,_ INSERTKEY [ [ _-s ON/RESET [ BUTTON [ E SET TO DESIRED LEVEL SPEED TRAINING ZONES ,)LLJ VV RESET Speed Control _ If there is a thin sheet of clear plastic on the console, remove it. FAST I CALS F CALS SPEED TIME DISI'ANCE I 1[ HEART A,E1 TRAINING ZONES AGE MJN _P,_ _ MAXB_ ...
-
Weslo WLTL29014 - page 9
_ Insert the key fully into the power switch. Inserting the key will not turn on the displays. The displays will turn on when the ON/RESET button is pressed or when the walking belt is started. Note: If you just installed batteries, the displays will already be on. B eset the speed control and start the walking belt. Turn the speed control to the R ...
-
Weslo WLTL29014 - page 10
HANDRAIL HEIGHT ADJUSTMENT The Handrails (4, 88) can be adjusted to either of two heights. Before adjusting the Handrails, remove the key and unplug the power cord. Remove the four Console Screws (3). While a second person lifts the Console Base (87), remove the Handrail Bolts (1), Handrail Washers (80), and Handrail Star Washers (2). Raise or lowe ...
-
Weslo WLTL29014 - page 11
HOW TO MOVE THE TREADMILL Before moving the treadmill, convert the treadmill to the storage position as described above. Make sure that the storage latch is locked fully over the catch. 1. Remove the weights from the weight racks. 2. Hold the upper ends of the handrails. Place one foot on one of the wheel as shown. 3. Tilt the treadmill back until ...
-
Weslo WLTL29014 - page 12
MAINTENANCE AND TROUBLE-SHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please call our Customer Service Department toll- free at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). PRO ...
-
Weslo WLTL29014 - page 13
PROBLEM: The walking belt slows when walked on SOLUTION: a. Use only a single-outlet surge suppressor that meets all of the specifications described on page 7. b. If the walking belt is overtightened, treadmill perfor- mance may decrease and the walking belt may become damaged. Remove the key and UNPLUG THE POWER CORD. Using the allen wrench, turn ...
-
Weslo WLTL29014 - page 14
CONDITIONING GUIDELINES WARNING: Before beginning this or any exercise program, consult your physician. This is especially important for individuals over the age of 35 or individuals with pre-existing health problems. The following guidelines will help you to plan your exercise program. For more detailed exercise informa- tion, obtain a reputable b ...
-
Weslo WLTL29014 - page 15
WORKOUT GUIDELINES zone for longer than 20 minutes.) Breathe regularly anddeeply as you exercise--never hold your breath. Each workout should include the following three parts: A Warm-up Start each workout with 5 to 10 minutes of stretching and light exercise. A proper warm-up increases your body temperature, heart rate, and circulation in prepa- r ...
-
Weslo WLTL29014 - page 16
PART LIST--Model No. WLTL29014 R0903A Key No. Qty. Description Key No. Qty. Description 1 4 Handrail Bolt 48 1 Motor Tension Nut 2 4 Handrail Star Washer 49 2 Upright Endcap 3 4 Console Screw 50 1 Right Foot Rail 4 1 Right Handrail 51 4 Platform Screw 5 8 Console Insert Screw 52 1 Front Roller Adj. Bolt 6 1 Key/Clip 53 1 Wire Harness 7 1 Right Fram ...
-
Weslo WLTL29014 - page 17
30 28 i i ' 4O 78 82 _ 77 . /-/ ,, 28 i 36 37 [ 28 ® 65 I5 23 81 18 1 50 67 71 3 5'8 _ 69 73 57 49 < 38 5 53 4 : 35 --... ---..... "--- ' h , I'll X I" 0 0 Z 0 q I" 0 ;U o _3 o GO 3> ...
-
Weslo WLTL29014 - page 18
ORDERING REPLACEMENT PARTS To order replacement parts, simply call our Customer Service Department toll-free at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). To help us assist you, please be pre- pared to give the following information when calling: • The MODEL NUMBER of the product (WLTL29014) • ...
У вас вопрос, касающийся Weslo WLTL29014?
Воспользуйтесь формуляром, находящимся ниже
Если с помощью найденной инструкции Вы не решили свою проблему с Weslo WLTL29014, задайте вопрос, заполнив следующий формуляр. Если у какого то из пользователей была похожая проблема с Weslo WLTL29014 со всей вероятностью он захочет поделиться методом ее решения.