-
Toro N-DR2000 - page 1
H D D VIDEO NETWORK E R ROR RECORDER P O W E R N-DR2000 TM NETWORK VIDEO RECORDER N-DR2000 INSTRUCTION MANUAL Thank you for purchasing TOA's Network Video Recorder. Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment. ...
-
Toro N-DR2000 - page 2
2 T ABLE OF CONTENTS 1. SAFETY PRECAUTIONS ............................................................................... 3 2. LIST OF INCLUDED COMPONENTS AND P ARTS ............................... 5 3. GENERAL DESCRIPTION ............................................................................. 5 4. FEA TURES ................................. ...
-
Toro N-DR2000 - page 3
3 1. SAFETY PRECAUTIONS • Before installation or use, be sure to carefully read all the instructions in this section for correct and safe operation. • Make sure to observe the instructions in this manual as the conventions of safety symbols and messages regarded as very important precautions are included. • We also recommend you keep this ins ...
-
Toro N-DR2000 - page 4
4 Indicates a potentially hazardous situation which, if mishandled, could result in moderate or minor personal injury, and/or property damage. CAUTION When Installing the Unit • Never plug in nor remove the power supply plug with wet hands, as doing so may cause electric shock. • When unplugging the power supply cord, be sure to grasp the power ...
-
Toro N-DR2000 - page 5
5 2. LIST OF INCLUDED COMPONENTS AND P ARTS Check to be sure that the following components and parts are contained in the package: Power supply cord (2 m) .................................................................................. 1 Network Video Recorder Instruction manual .................................................. 1 CD-ROM (Update ...
-
Toro N-DR2000 - page 6
6 6. HANDLING PRECAUTIONS • The supplied power supply cord is designed for exclusive use with the Recorder. Never use it with other equipment. • It is recommended that the Recorder be always used in locations where the ambient temperature ranges from 0°C to +40°C and humidity levels of less than 80% to ensure that no condensation is formed. ? ...
-
Toro N-DR2000 - page 7
7 (1) Power switch Press this switch to turn on the power. To turn off the power, press this switch again. After powering up : The system starts after about 1 minute. After powering down: The system shuts down after about 30 seconds (2) Message Indicator (Red) Flashes or illuminates to indicate the action of internal protection circuits. Illuminate ...
-
Toro N-DR2000 - page 8
8 Software Decoder N-SD2000 Network Combination Dome Camera N-CC2564 Network Color Camera N-CC2360 Network Video Receiver N-VR2010 Monitor Network Video T ransmitter Network Video T ransmitter N-VT2010 H D D DEO NETWORK V I E R R O R N- RECORDER P O W E R DR2000 Network Video Recorder N-DR2000 PoE compatible switching HUB Analog CCTV system T o AC ...
-
Toro N-DR2000 - page 9
9 10. FUNCTIONS 10.1. Device Functions The device is equipped with the following functions. • Recording (Normal Recording, Pre-Alarm Recording, Alarm Recording, Scheduled Recording) • Search and playback using the N-SD2000 Software Decoder • Setting adjustment using a Web browser • Email notification in the event of malfunction • Time adj ...
-
Toro N-DR2000 - page 10
10 Recording priority level High Low Alarm Recording Pre-Alarm Recording Scheduled Recording Normal Recording Camera's recording mode Normal recording Alarm recording Normal recording Alarm occurs. Alarm ends. (Example) If an alarm occurs for a camera in Normal Recording mode... Since Alarm recording has a higher priority than Normal recording ...
-
Toro N-DR2000 - page 11
11 HUB N-DR2000 View 1 : 1 – 4 View 2 : 1 View 3 : 1 View 4 : 1 View 5 : 1 PC1 PC2 PC4 PC3 PC5 (Example) PC 1 displays 4-split screen, while PCs 2 through 5 all display single-split screen each, reaching the maximum limit of 8 simultaneous connections. Allows playback of up to 8 views simultaneously . Camera 1 Camera 16 10.2.3. Using multiple N-D ...
-
Toro N-DR2000 - page 12
12 10.4. Making Settings Using a Web Browser The N-DR2000 is equipped with its own Web server function. You can access this server via Web browser software in order to change the N-DR2000's status displays and various settings, and also to conduct maintenance. 10.5. General Overview of N-DR2000 Settings A Web browser can be used to perform the ...
-
Toro N-DR2000 - page 13
13 Setting Manual (Chapter6) Reference Item Description Always record video and audio. Set the Normal recording mode. Make regularly scheduled recordings at pre-set times. By setting Scheduled recording, the recording occurs only at the specified times. W ant to always record images from a network camera, but at certain times only change the record ...
-
Toro N-DR2000 - page 14
14 Audio recording: None ( * 1 ) Image size Picture quality Frame rate per camera 1 fps 2 fps 3 fps 5 fps High: D1 1 129 64 43 25 High: D1 3 186 93 62 37 High: D1 5 337 168 112 67 Medium: Half-D1 1 192 96 64 38 Medium: Half-D1 3 276 138 92 55 Medium: Half-D1 5 493 246 164 98 Low: QVGA 1 364 182 121 72 Low: QVGA 3 521 260 173 104 Low: QVGA 5 958 479 ...
-
Toro N-DR2000 - page 15
15 Audio recording: 32 K Compression: OFF Loopback ( * 1 ) Image size Picture quality Frame rate per camera 1 fps 2 fps 3 fps 5 fps 1 4 63 42 71 9 3 5 24 03 32 4 5 6 05 04 43 5 1 5 24 13 42 5 3 5 74 74 03 1 5 6 35 65 04 1 1 6 05 24 53 6 3 6 45 75 14 2 5 6 76 35 95 2 Audio recording: 32 K Compression: ON Loopback ( * 1 ) Image size Picture quality F ...
-
Toro N-DR2000 - page 16
16 M5 x 12 binding head screw (supplied with the MB-23B) M5 fiber washer (supplied with the MB-23B) M4 x 12 binding head screw (supplied with the MB-23B) MB-23B (optional) N-DR2000 H D D VID E O N E T W O R K E R R O R RE C O R D E R P OW E R N - D R 2 0 0 0 13. RACK MOUNTING Use the optional MB-23B Rack Mounting Bracket when mounting the Network V ...
-
Toro N-DR2000 - page 17
17 Possible Solution Check to make sure the power cord is plugged in to both the unit and the wall socket. The power indicator LED takes about 30 seconds to extinguish after the power switch is pressed. Wait 30 seconds or so to see if the light goes off. Check to ensure that the unit is correctly connected to the network. Check the unit's netw ...
-
Toro N-DR2000 - page 18
18 Possible Solution Following a restart, an automatic disk check program will run automatically. Wait until this check is completed. If the lamp remains illuminated for more than 15 minutes, leave the power on and contact your nearest TOA dealer. Disconnect and reconnect the main AC power supply. If the unit seems to not restart after reconnecting ...
-
Toro N-DR2000 - page 19
19 15. SPECIFICA TIONS 110 – 120 V AC, 50/60 Hz 57 W (0.8 A) HDD S-ATA 640 GB (320 GB x 2) 100BASE-TX/1000BASE-T, Auto-Nego: RJ45 connector TCP, UDP, SIP, RTP, HTTP, SMTP, ARP, DNS, NTP Settable 1, 2, 3, 5 fps (Per Network Camera and Network Video Transmitter) Video: JPEG Audio: sub-band ADPCM, PCM (non-compression) Up to 16 stations (Network Cam ...
-
Toro N-DR2000 - page 20
133-22-049-8A URL: http://www.toa.jp/ 220 – 240 V AC, 50/60 Hz 57 W (0.8 A) HDD S-ATA 640 GB (320 GB x 2) 100BASE-TX/1000BASE-T, Auto-Nego: RJ45 connector TCP, UDP, SIP, RTP, HTTP, SMTP, ARP, DNS, NTP Settable 1, 2, 3, 5 fps (Per Network Camera and Network Video Transmitter) Video: JPEG Audio: sub-band ADPCM, PCM (non-compression) Up to 16 statio ...
У вас вопрос, касающийся Toro N-DR2000?
Воспользуйтесь формуляром, находящимся ниже
Если с помощью найденной инструкции Вы не решили свою проблему с Toro N-DR2000, задайте вопрос, заполнив следующий формуляр. Если у какого то из пользователей была похожая проблема с Toro N-DR2000 со всей вероятностью он захочет поделиться методом ее решения.