-
Bosch Appliances DVRXEAP01 - page 1
ATM/POS Bridge DVRXEAP01 en Installation Manual ...
-
Bosch Appliances DVRXEAP01 - page 2
...
-
Bosch Appliances DVRXEAP01 - page 3
A TM/POS Bridge Table of Cont ents | en 3 Bosch Security Systems, Inc. Installation Manual F .01U.171.816 | 1.0 | 2010.09 T able of Contents 1S a f e t y 5 1.1 FCC & ICES compliance 7 2 Description 9 2.1 Parts List 9 2.2 Supported Protoc ols 9 3S y s t e m O v e r v i e w 1 0 4 Installation 11 4.1 Mounting the Bridge 11 4.2 Making Connections t ...
-
Bosch Appliances DVRXEAP01 - page 4
4 en | Table of Cont ents A TM/POS Bridge F .01U.171.816 | 1.0 | 2010.09 Installation Manual Bosch Security Systems, Inc. 6 Configuration Using HyperTerminal 24 6.1 Connecting the Bridge 24 6.2 Initiating a HyperTerminal Session 24 6.3 Configuring Bridge Operation via Hyp erTerminal 26 6.3.1 Network Setup 26 6.3.2 Communication Channels 28 6.3.3 Te ...
-
Bosch Appliances DVRXEAP01 - page 5
AT M / P O S B r i d g e S a f e t y | e n 5 Bosch Security Systems, Inc. Installation Manual F .01U.171.816 | 1.0 | 2010.09 1S a f e t y Type numbers: Read, follow, and retain all of th e following safety instructions. Heed all warnings on the unit an d in the operating instructions before operation. 1. Clean only with a dry cloth. Do not use liqu ...
-
Bosch Appliances DVRXEAP01 - page 6
6 en | Safety A TM/POS Bridge F .01U.171.816 | 1.0 | 2010.09 Installation Manual Bosch Security Systems, Inc. 7. Do not overload outlets and extension cords, as this can cause fire or electrical shock. 8. Protect the plug and power cord from foot traffic or pinching, at electrical outlets, and at its exit from the unit. 9. Operate the unit only fro ...
-
Bosch Appliances DVRXEAP01 - page 7
AT M / P O S B r i d g e S a f e t y | e n 7 Bosch Security Systems, Inc. Installation Manual F .01U.171.816 | 1.0 | 2010.09 1.1 FCC & ICES compliance FCC & ICES Information (U.S.A. and Canadian Models Only) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules ...
-
Bosch Appliances DVRXEAP01 - page 8
8 en | Safety A TM/POS Bridge F .01U.171.816 | 1.0 | 2010.09 Installation Manual Bosch Security Systems, Inc. Informations FCC et ICES (modèles utilisés aux États -Unis et au Canada uniqueme nt) Suite à différents tests, cet appareil s'est révélé conforme aux exigences imposées aux a ppareils numériques de classe B , en vertu de la s ...
-
Bosch Appliances DVRXEAP01 - page 9
A TM/POS Bridge Description | en 9 Bosch Security Systems, Inc. Installation Manual F .01U.171.816 | 1.0 | 2010.09 2 Description The ATM/POS Bridge provides an interface between a digital recorder and either Automatic Teller Machines (ATM) or Point- of-Sale (POS) equipment such as cash registers. Both single- and multi-drop ATM networks are support ...
-
Bosch Appliances DVRXEAP01 - page 10
10 en | Syst em Overview A TM/POS Bridge F .01U.171.816 | 1.0 | 2010.09 Installation Manual Bosch Security Systems, Inc. 3 Syst em Ov er view The following illustration shows an example of how a bridge is used in a network of digital vi deo recorders and POS terminals. Figure 3.1 POS terminal network The following illustration shows an example of h ...
-
Bosch Appliances DVRXEAP01 - page 11
A TM/POS Bridge Installation | en 11 Bosch Security Systems, Inc. Installation Manual F .01U.171.816 | 1.0 | 2010.09 4 Installation This section details the physical installation of the ATM/POS Bridge. 4.1 Mounting the Bridge Determine a location where all incoming connections can reach the ATM/POS Bridge. Using the screws provided, attach the two ...
-
Bosch Appliances DVRXEAP01 - page 12
12 en | Installation A TM/POS Bridge F .01U.171.816 | 1.0 | 2010.09 Installation Manual Bosch Security Systems, Inc. 4.2 Making Connections to the Bridge Use the following illustration to make the appropriate connections to the ATM/POS Bridge: Figure 4.1 A TM/POS Bridge co nnectors 1 Ethernet RJ45 connector 2 COM 3 RS-232 connect or (console port) ...
-
Bosch Appliances DVRXEAP01 - page 13
A TM/POS Bridge Installation | en 13 Bosch Security Systems, Inc. Installation Manual F .01U.171.816 | 1.0 | 2010.09 1. Connect the supplied DC po wer adapter unit to the DC power input connector of the bridge. 2. Connect the RJ45 connector of the bridge via a straight Ethernet CAT5 network cable to a network switch or hub that supports 10BaseT. 3. ...
-
Bosch Appliances DVRXEAP01 - page 14
14 en | Installation A TM/POS Bridge F .01U.171.816 | 1.0 | 2010.09 Installation Manual Bosch Security Systems, Inc. 4.3 COM Connector Detail The four COM connectors on the brid ge are all 9-pin SubD-type male connectors. Figure 4.2 COM connect or detail Note: The console cable has pin 9 connected to pin 5 (GND). When pin 9 of COM 3 (console) is at ...
-
Bosch Appliances DVRXEAP01 - page 15
A TM/POS Bridge Configuration | en 15 Bosch Security Systems, Inc. Installation Manual F .01U.171.816 | 1.0 | 2010.09 5 Configuration You must configure the ATM/POS Bridge network settings to ensure proper communication on an existing TCP/ IP network. This section provides configurati on details using the Web-based interface. To configure the bridg ...
-
Bosch Appliances DVRXEAP01 - page 16
16 en | Configuration A TM/POS Bridge F .01U.171.816 | 1.0 | 2010.09 Installation Manual Bosch Security Systems, Inc. 3. From a PC connected to the same network, launch the BridgeDetector.exe application, located on the CD. The PC opens the Bridge Dete ctor window that displays the MAC Address and the default IP Addres s, Subnet Mask, and Gateway f ...
-
Bosch Appliances DVRXEAP01 - page 17
A TM/POS Bridge Configuration | en 17 Bosch Security Systems, Inc. Installation Manual F .01U.171.816 | 1.0 | 2010.09 5. Launch Internet Explorer and navigate to the default bridge IP Address: 169.254.1.1 Internet Explorer displays the ATM/POS Bridge interface. 6. Click the Network Setup link in the navigation pane. 7. Type an optional name for th ...
-
Bosch Appliances DVRXEAP01 - page 18
18 en | Configuration A TM/POS Bridge F .01U.171.816 | 1.0 | 2010.09 Installation Manual Bosch Security Systems, Inc. 5.2 Configuring Operation via a N etwork After the bridge is properly co nfigured for network acce ss, you can configure the COM and Term inal settings via Internet Explorer. To access the bridge configuration page: 1. Launch In ter ...
-
Bosch Appliances DVRXEAP01 - page 19
A TM/POS Bridge Configuration | en 19 Bosch Security Systems, Inc. Installation Manual F .01U.171.816 | 1.0 | 2010.09 – Simulation Mode : Select the type of device to test the connection between the bridge and the digital recorde r. Select this mode to send samp le data from the bridge to the digital recorder. – Recording Language : Select the ...
-
Bosch Appliances DVRXEAP01 - page 20
20 en | Configuration A TM/POS Bridge F .01U.171.816 | 1.0 | 2010.09 Installation Manual Bosch Security Systems, Inc. – Bridge Name : Type an optional name for the bridge in the Bridge Name input box. This name facilitates recognition of the bridge on the network. – IP Address : Displays the current IP Address for the bridge. You can type a new ...
-
Bosch Appliances DVRXEAP01 - page 21
A TM/POS Bridge Configuration | en 21 Bosch Security Systems, Inc. Installation Manual F .01U.171.816 | 1.0 | 2010.09 5.2.3 Terminal The Terminal Setup pages allow yo u to configure the bridge to accept transactions from the ATM/POS devices connected to the bridge. – Name : Type an optional name for the terminal. This name facilitates recognition ...
-
Bosch Appliances DVRXEAP01 - page 22
22 en | Configuration A TM/POS Bridge F .01U.171.816 | 1.0 | 2010.09 Installation Manual Bosch Security Systems, Inc. – Code Page : Select the code page (character set for a particular language) that the ATM/POS terminal uses to encode transaction data. The selections are: – PC437 (Latin 1) – PC858 (Latin II + EURO) – PC737 (Greek) – PC77 ...
-
Bosch Appliances DVRXEAP01 - page 23
A TM/POS Bridge Configuration | en 23 Bosch Security Systems, Inc. Installation Manual F .01U.171.816 | 1.0 | 2010.09 5.2.4 COM Port The COM Port page enables you to configure the four physical communication port settings on the bridge. – Comport Mode : Select the appropriate communication method between the brid ge and the terminal: – Asynchro ...
-
Bosch Appliances DVRXEAP01 - page 24
24 en | Configuration Using HyperT erminal A TM/POS Bridge F .01U.171.816 | 1.0 | 2010.09 Installation Manual Bosch Security Systems, Inc. 6 Configuration Using HyperT er minal You can configure the ATM/POS Br idge via a PC H yperTer minal session. The PC is connected to the COM 3 (cons ole) port on the bridge via a serial connection. For instructi ...
-
Bosch Appliances DVRXEAP01 - page 25
A TM/POS Bridge Configuration Using HyperT er minal | en 25 Bosch Security Systems, Inc. Installation Manual F .01U.171.816 | 1.0 | 2010.09 4. Ensure that the settings in the COM Properties dialog box match these settings: – Bits per second: 9600 – Data bits: 0 – Parity: None – Stop bits: 1 – Flow control: None 5. Click OK to accept the C ...
-
Bosch Appliances DVRXEAP01 - page 26
26 en | Configuration Using HyperT erminal A TM/POS Bridge F .01U.171.816 | 1.0 | 2010.09 Installation Manual Bosch Security Systems, Inc. 6.3 Configuring Bridge Oper ation via HyperT erminal After you establish a HyperTermi nal connection between a PC and the bridge, use the menu stru cture to configure the bridge settings. Press the F1 key to ope ...
-
Bosch Appliances DVRXEAP01 - page 27
A TM/POS Bridge Configuration Using HyperT er minal | en 27 Bosch Security Systems, Inc. Installation Manual F .01U.171.816 | 1.0 | 2010.09 – Bridge Name : Type an optional name for the bridge in the Bridge Name input box. This na me facilitates recognition of the bridge on the network. – IP Address : Displays the current IP Address for the bri ...
-
Bosch Appliances DVRXEAP01 - page 28
28 en | Configuration Using HyperT erminal A TM/POS Bridge F .01U.171.816 | 1.0 | 2010.09 Installation Manual Bosch Security Systems, Inc. 6.3.2 Communication Channels Select the Communication Channel option to configure the four physical communication port settings on the bridge. Select the appropriate option to configure a specific COM port. – ...
-
Bosch Appliances DVRXEAP01 - page 29
A TM/POS Bridge Configuration Using HyperT er minal | en 29 Bosch Security Systems, Inc. Installation Manual F .01U.171.816 | 1.0 | 2010.09 6.3.3 Terminal Setup The Terminal Setup pages allow yo u to configure the bridge to accept transactions from the de vices connected to the bridge. Select a terminal number to configure the settings for that ter ...
-
Bosch Appliances DVRXEAP01 - page 30
30 en | Configuration Using HyperT erminal A TM/POS Bridge F .01U.171.816 | 1.0 | 2010.09 Installation Manual Bosch Security Systems, Inc. – Code Page : Select the code page (character set for a particular language) that the ATM/POS terminal uses to encode transaction data. The selections are: – PC437 (Latin 1) – PC858 (Latin II + EURO) – P ...
-
Bosch Appliances DVRXEAP01 - page 31
A TM/POS Bridge Configuration Using HyperT er minal | en 31 Bosch Security Systems, Inc. Installation Manual F .01U.171.816 | 1.0 | 2010.09 6.3.4 Simulation Mode Use the Simulation Mode to select the type of device to test the connection between the bridge and the digital recorder. Select this mode to send sample data from the bridge to the digital ...
-
Bosch Appliances DVRXEAP01 - page 32
32 en | Configuration Using HyperT erminal A TM/POS Bridge F .01U.171.816 | 1.0 | 2010.09 Installation Manual Bosch Security Systems, Inc. 6.3.6 Ser vice Menu The System Menu contains se ttings for bridge operation. – Restore Defaults : Resets all COM and Terminal settings to factory defaults. This button does not reset the Network settings. – ...
-
Bosch Appliances DVRXEAP01 - page 33
A TM/POS Bridge T roubleshooting | en 33 Bosch Security Systems, Inc. Installation Manual F .01U.171.816 | 1.0 | 2010.09 7 T roubleshooting If you are unable to capture transaction data, follow these steps: 1. Check all cable connections. 2. Check the TCP/IP network connection with the ATM/POS Bridge. Ensure that the IP Address, Subnet Mask, and Ga ...
-
Bosch Appliances DVRXEAP01 - page 34
34 en | T echnical Data A TM/POS Bridge F .01U.171.816 | 1.0 | 2010.09 Installation Manual Bosch Security Systems, Inc. 8 T echnical Data Electrical Power Supply External DC power supply (supplied) Input: 100–240 VAC, 150 mA, 50/60 Hz Output: 12 VDC, 450 mA Connector DC jack, positive center pin, 10–30 VDC, 2 W Mechanical Dimensions 152 x 110 x ...
-
Bosch Appliances DVRXEAP01 - page 35
A TM/POS Bridge T echnical Data | en 35 Bosch Security Systems, Inc. Installation Manual F .01U.171.816 | 1.0 | 2010.09 EMC Requirements USA: FCC Part 15, Class B EU: EMC directive 89/336/EEC Immunity: EN50130-4 Emission: EN55022 Class B Harmonics: EN61000-3-2 Voltage Fluctuations: EN61000-3-3 Safety USA: UL60950 EU: EN60950 Canada: CAN/CSA - C22.2 ...
-
Bosch Appliances DVRXEAP01 - page 36
36 en | A TM/POS Bridge F .01U.171.816 | 1.0 | 2010.09 Installation Manual Bosch Security Systems, Inc. A U pdating Bridge Firmware Follow the steps below to update the firmware on the ATM/ POS Bridge. 1. Download the Zip file for the ATM/POS Bridge firmware from the Bosch Security Systems Web site (www.boschsecurity.com). 2. Unzip the firmware upd ...
-
Bosch Appliances DVRXEAP01 - page 37
AT M / P O S B r i d g e | e n 37 Bosch Security Systems, Inc. Installation Manual F .01U.171.816 | 1.0 | 2010.09 a. Unplug the power cable from the bridge. b. Connect the supplied console cable to COM Port 3 (console) on the bridge and to a COM port on the PC. c. Connect the supplied powe r adapter to the bridge and to the main power. The red LED ...
-
Bosch Appliances DVRXEAP01 - page 38
38 en | A TM/POS Bridge F .01U.171.816 | 1.0 | 2010.09 Installation Manual Bosch Security Systems, Inc. 6. Click Next to select the download parameters. 7. Click the check boxes to do wnload the Bridge Software and the Printer definition and simulation files. A check mark indicates that th e process will update the specific files. 8. Select the fol ...
-
Bosch Appliances DVRXEAP01 - page 39
AT M / P O S B r i d g e | e n 39 Bosch Security Systems, Inc. Installation Manual F .01U.171.816 | 1.0 | 2010.09 10. Click Next to select the de vice profiles that are stored on the bridge. – Select individual check boxes to select specific device profiles. – Click the Select All Devices to select all device profiles. – Click Unselect All De ...
-
Bosch Appliances DVRXEAP01 - page 40
40 en | A TM/POS Bridge F .01U.171.816 | 1.0 | 2010.09 Installation Manual Bosch Security Systems, Inc. 12. Click Finish to accept the settings and to start the firmware update. If you receive an error messa ge, refer to Page 41 . 13. Click Yes to overwrite the existing files on the bridge. The wizard displays a do wnload progress screen. DO NOT in ...
-
Bosch Appliances DVRXEAP01 - page 41
AT M / P O S B r i d g e | e n 41 Bosch Security Systems, Inc. Installation Manual F .01U.171.816 | 1.0 | 2010.09 Troubleshooting Bridge Firmware Up date Use the following steps to correc t the firmware settings If you receive the following error during the firmware upd ate process: 1. Click OK to acknowledge the error. 2. Click the Cancel button t ...
-
Bosch Appliances DVRXEAP01 - page 42
42 en | A TM/POS Bridge F .01U.171.816 | 1.0 | 2010.09 Installation Manual Bosch Security Systems, Inc. ...
-
Bosch Appliances DVRXEAP01 - page 43
...
-
Bosch Appliances DVRXEAP01 - page 44
Bosch Security Systems, Inc. www.boschsecurity.com © Bosch Security Systems, Inc., 2010 ...
У вас вопрос, касающийся Bosch Appliances DVRXEAP01?
Воспользуйтесь формуляром, находящимся ниже
Если с помощью найденной инструкции Вы не решили свою проблему с Bosch Appliances DVRXEAP01, задайте вопрос, заполнив следующий формуляр. Если у какого то из пользователей была похожая проблема с Bosch Appliances DVRXEAP01 со всей вероятностью он захочет поделиться методом ее решения.