-
Siemens MCM 1755 NTD - page 1
PC MCM 1755 NTD Bildschirm / Moniteur / Monitor / Skärm / Beeldscherm Bildschirm Moniteur Monitor Skärm Beeldscherm Operating Manual Manuel d'utilisation Instrucciones de servicio Istruzioni per l'uso Användarmanual Gebruikshandleiding ...
-
Siemens MCM 1755 NTD - page 2
Dieses Handbuch wurde auf Recycling-Papier gedruckt. This manual has been printed on recycled paper. Ce manuel est imprimé sur du papier recyclé. Este manual ha sido impreso sobre papel reciclado. Questo manuale è stato stampato su carta da riciclaggio. Denna handbok är tryckt på recyclingpapper. Dit handboek werd op recycling-papier gedrukt. ...
-
Siemens MCM 1755 NTD - page 3
Sie haben ... ... technische Fragen oder Probleme? Wenden Sie sich bitte an: • einen unserer IT -Service-Shops • Ihren zuständigen Vertriebspartner • Ihre Verkaufsstelle ... uns zu diesem Handbuch etwas mitzuteilen? Schicken Sie uns bitte Ihre Anregungen unter Angabe der Bestellnummer dieses Handbuches. Sieme ns Nixdor f Infor mation ssystem ...
-
Siemens MCM 1755 NTD - page 4
...
-
Siemens MCM 1755 NTD - page 5
MCM 1755 NTD Operating Manual January 1997 edition ...
-
Siemens MCM 1755 NTD - page 6
Your training needs ... The Siemens Nixdorf Training Centers offer you a wide range of training courses in information technology and on IT products and other subjects - onsite near to your workplace or offsite at one of our training centers. Contact us for information on consulting, course schedules and selfstudy material. Please write or fax: Fax ...
-
Siemens MCM 1755 NTD - page 7
A26361-K472-Z100-2-5E19 English Contents Introduction .............................................................................................................. 1 Explanation of symbols .................................................................................... 2 Important notes ......................................................... ...
-
Siemens MCM 1755 NTD - page 8
...
-
Siemens MCM 1755 NTD - page 9
A26361-K472-Z100-2-5E19 English - 1 Introduction Your new MCM 1755 NTD color monitor possesses a whole range of useful features and functions, e. g.: • 17" (40 cm) high-resolution CRT (0.28 mm dot pitch) • automatic scanning of all horizontal frequencies from 30 to 69 kHz and all refresh rates (vertical frequencies) from 50 to 160 Hz • d ...
-
Siemens MCM 1755 NTD - page 10
Color monitor MCM 1755 NTD 2 - English A26361-K472-Z100-2-5E19 Explanation of symbols The meanings of the symbols and fonts used in this manual are as follows: ! Pay particular attention to texts marked with this symbol. Failure to observe this warning endangers your life, destroys the system, or may lead to loss of data. i This symbol is followed ...
-
Siemens MCM 1755 NTD - page 11
Color monitor MCM 1755 NTD A26361-K472-Z100-2-5E19 English - 3 Important notes In this chapter you will find information regarding safety which is essential to take note of with your monitor. The chapter also contains information on the licenses issued for your equipment. Safety This device complies with the relevant safety regulations for data pro ...
-
Siemens MCM 1755 NTD - page 12
Color monitor MCM 1755 NTD 4 - English A26361-K472-Z100-2-5E19 • If you use a different data cable from the one supplied, ensure that it is adequately shielded. CE conformance and optimum picture quality are guaranteed only if you use the data cable supplied. • No data transmission cable should be connected or disconnected during a thunderstorm ...
-
Siemens MCM 1755 NTD - page 13
Color monitor MCM 1755 NTD A26361-K472-Z100-2-5E19 English - 5 Manufacturer's notes Energy Star The Siemens Nixdorf multiscan color monitor MCM 1755 NTD is designed to conserve electricity by dropping to less than 15 W when it goes into suspend mode and to less than 5 W when it goes into OFF mode. With this new power management the MCM 1755 NT ...
-
Siemens MCM 1755 NTD - page 14
Color monitor MCM 1755 NTD 6 - English A26361-K472-Z100-2-5E19 Note on X-ray radiation This device complies with the German X-ray regulations. The local dosage emitted is less than 1 µSv/h (micro-Sievert per hour). Note on ergonomic design and emission This unit lies within the limit values set by TCO '95 for low-frequency electromagnetic fie ...
-
Siemens MCM 1755 NTD - page 15
Color monitor MCM 1755 NTD A26361-K472-Z100-2-5E19 English - 7 FCC Class B Compliance Statement If there is an FCC identifier on the device, then: The following statement applies to the products covered in this manual, unless otherwise specified herein. The statement for other products will appear in the accompanying documentation. NOTE: This equip ...
-
Siemens MCM 1755 NTD - page 16
Color monitor MCM 1755 NTD 8 - English A26361-K472-Z100-2-5E19 • The female/male receptacles of the cord set must meet CEE-22 requirements. The receptacles will look as shown below. • The cable has to be HAR-certified or VDE-certified. The mark HAR or VDE will appear on the outer sheath or on the insulation of one of the inner conductors. • F ...
-
Siemens MCM 1755 NTD - page 17
Color monitor MCM 1755 NTD A26361-K472-Z100-2-5E19 English - 9 Power cable for devices distributed in the US and Canada In the United States and Canada the cord set must also be UL-listed and CSA- labelled. The voltage rating should be min. 250 volts a.c. Please consult the following table for the selection criteria for power cables used in the Uni ...
-
Siemens MCM 1755 NTD - page 18
Color monitor MCM 1755 NTD 10 - English A26361-K472-Z100-2-5E19 Checking the contents of the consignment Ê Unpack all the individual parts. Ê Check the consignment for damage incurred during transport. Ê Check whether the consignment agrees with the details in the delivery note. A complete consignment consists of: − one monitor − one data ca ...
-
Siemens MCM 1755 NTD - page 19
Color monitor MCM 1755 NTD A26361-K472-Z100-2-5E19 English - 11 Installing an ergonomic video workstation Before you set up your equipment you should select a suitable position for working at the monitor. Please observe the following advices when installing a video workstation. Window Avoid direct and reflected glare. Avoid glare from electric ligh ...
-
Siemens MCM 1755 NTD - page 20
Color monitor MCM 1755 NTD 12 - English A26361-K472-Z100-2-5E19 Connecting the monitor See your PC's operating manual for details of the connectors on the system unit. ! Please note the information provided in the chapter " Safety "a tt h e beginning of this manual. Do not cover the ventilation openings of the monitor. If you are ass ...
-
Siemens MCM 1755 NTD - page 21
Color monitor MCM 1755 NTD A26361-K472-Z100-2-5E19 English - 13 Ê Connect the other connector of the data cable to monitor port on the system unit and secure the connector by tightening the safety screws. Ê Plug the power cable supplied into the power connector (1) of the monitor. Ê Plug the power cable into the monitor connector at the rear of ...
-
Siemens MCM 1755 NTD - page 22
Color monitor MCM 1755 NTD 14 - English A26361-K472-Z100-2-5E19 Operation of the monitor 12 3 1 = Control panel with buttons for screen setting (underneath the cover) 2 = Power lamp 3 = ON/OFF switch Switching the monitor on Ê Press the ON/OFF switch (3). The power lamp (2) lights up green when the system unit is turned on. i If your PC has a powe ...
-
Siemens MCM 1755 NTD - page 23
Color monitor MCM 1755 NTD A26361-K472-Z100-2-5E19 English - 15 Notes on power management If your PC has a VESA DPMS (Video Electronics Standard Association, Display Power Management Signaling) power management function (energy-saving mode), your monitor will fully support this function. The monitor has a four-stage power management system. Stage O ...
-
Siemens MCM 1755 NTD - page 24
Color monitor MCM 1755 NTD 16 - English A26361-K472-Z100-2-5E19 Changing the monitor settings With the buttons and controls on the control panel, you can change the monitor settings. Ê Open the cover of the control panel by pressing on the arrow and pulling the cover slightly downward. 78 9 12 3 456 COLOR TEMP. 1 = Picture position 2 = Picture siz ...
-
Siemens MCM 1755 NTD - page 25
Color monitor MCM 1755 NTD A26361-K472-Z100-2-5E19 English - 17 Setting picture size, position, edges and color temperature The picture size, position and edges have been set to optimum values at the factory for the preset operating modes (see "Technical data"). Depending on the monitor controller used, it may be necessary to change these ...
-
Siemens MCM 1755 NTD - page 26
Color monitor MCM 1755 NTD 18 - English A26361-K472-Z100-2-5E19 COLOR TEMP. Setting the color temperature Press the Color temperature button once. Use arrow button or to select color temperature 6500 K or 9300 K. Activating the factory settings Factory settings are provided for picture size, picture position and edges in the predefined operating mo ...
-
Siemens MCM 1755 NTD - page 27
Color monitor MCM 1755 NTD A26361-K472-Z100-2-5E19 English - 19 Displaying stored settings You can have information about the stored settings displayed in a window. If no button is pressed for several seconds the window will be masked out and the power lamp will glow green again. Press the Position button twice. A window containing the stored setti ...
-
Siemens MCM 1755 NTD - page 28
Color monitor MCM 1755 NTD 20 - English A26361-K472-Z100-2-5E19 Notes on ergonomic color adjustment If you select colors for the display in your application programs, take note of the information below. The primary colors blue and red on a dark background do not produce the minimum required contrast of 3:1 and are therefore not suitable for continu ...
-
Siemens MCM 1755 NTD - page 29
Color monitor MCM 1755 NTD A26361-K472-Z100-2-5E19 English - 21 Cleaning the monitor ! Always pull out the power plug before you clean the monitor. Do not clean any interior parts yourself, leave this job to a service technician. Do not use any cleaning agents that contain abrasives or may corrode plastic. Ensure that no liquid will run into the sy ...
-
Siemens MCM 1755 NTD - page 30
Color monitor MCM 1755 NTD 22 - English A26361-K472-Z100-2-5E19 Technical data Dimensions and weight CRT: Visible diagonals: Dot pitch: Maximal resolution: Dimensions ( WxHxD ) : Weight: 43 cm (17") 40 cm 0.28 mm 1280 x 1024 pixels 424 mm x 425 mm x 444 mm 18 kg Accessories: power cable (1.8 m) Storable display modes: 18 (8 of which are preset ...
-
Siemens MCM 1755 NTD - page 31
Color monitor MCM 1755 NTD A26361-K472-Z100-2-5E19 English - 23 Environmental data Environment class 3K2, DIN IEC 721 Rated range of operation: Humidity: Limit range of operation: Humidity: 15 ˚C .... 35 ˚C 20 % .... 85 % 5 ˚C .... 40 ˚C 20 % .... 85 % Condensation must be avoided. VESA-DDC-compatible VGA interface Your monitor is equipped with ...
-
Siemens MCM 1755 NTD - page 32
Color monitor MCM 1755 NTD 24 - English A26361-K472-Z100-2-5E19 Preset operating modes The monitor is preset to the following modes at the factory: Horizontal frequency Refresh rate Resolution 31.5 kHz ± 0.5 kHz 31.5 kHz ± 0.5 kHz 43.3 kHz ± 0.5 kHz 37.8 kHz ± 0.5 kHz 50.6 kHz ± 0.5 kHz 53.7 kHz ± 0.5 kHz 63.0 kHz ± 0.5 kHz 68.7 kHz ± 0.5 k ...
-
Siemens MCM 1755 NTD - page 33
Color monitor MCM 1755 NTD A26361-K472-Z100-2-5E19 English - 25 Pin assignment D-SUB 1 5 6 10 11 15 Pin Meaning Pin Meaning 1 Red video 9 Not assigned 2 Green video 10 Logic ground 3 Blue video 11 Monitor ground 4 Monitor ground 12 Serial DDC data line (SDA) 5 DCC return 13 H. sync 6 Red video ground 14 V. sync 7 Green video ground 15 Serial DDC cl ...
-
Siemens MCM 1755 NTD - page 34
Color monitor MCM 1755 NTD 26 - English A26361-K472-Z100-2-5E19 Error handling If an error occurs, first check the points listed below. If you cannot solve the problem, please contact our customer service. The display is too small or not centered The monitor recognizes an undefined mode. Ê Adjust the picture size, position and edges (see " Op ...
У вас вопрос, касающийся Siemens MCM 1755 NTD?
Воспользуйтесь формуляром, находящимся ниже
Если с помощью найденной инструкции Вы не решили свою проблему с Siemens MCM 1755 NTD, задайте вопрос, заполнив следующий формуляр. Если у какого то из пользователей была похожая проблема с Siemens MCM 1755 NTD со всей вероятностью он захочет поделиться методом ее решения.