Русский dropdown-ico

Инструкция обслуживания Dell 10-ST2E

37 страниц 2.89 mb
Скачать

Перейти на страницу of 37

Summary
  • Dell 10-ST2E - page 1

    Dell Latitude 10 – ST2e Owner's Manual Regulatory Model: T05G Regulatory Type: T05G001 ...

  • Dell 10-ST2E - page 2

    Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2013 Dell Inc ...

  • Dell 10-ST2E - page 3

    Contents Notes, Cautions, and Warnings ...................................................................................................2 1 Working on Your Computer .......................................................................................................5 Before Working Inside Your Computer .......................................... ...

  • Dell 10-ST2E - page 4

    Running the ePSA Diagnostic Utility .......................................................................................................................27 Beep Codes ............................................................................................................................................................. 29 LED Error Codes .... ...

  • Dell 10-ST2E - page 5

    1 Working on Your Computer Before Working Inside Your Computer Use the following safety guidelines to help protect your computer from potential damage and to help to ensure your personal safety. Unless otherwise noted, each procedure included in this document assumes that the following conditions exist: • You have performed the steps in Working o ...

  • Dell 10-ST2E - page 6

    NOTE: To avoid damaging the system board, you must remove the main battery before you service the computer. 7. Remove the main battery. 8. Turn the computer top-side up. 9. Press the power button to ground the system board. CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before opening the display. ...

  • Dell 10-ST2E - page 7

    NOTE: It is recommended that you immediately backup the operating system image using the USB device through Dell Backup and Recovery (DBAR) application. 7 ...

  • Dell 10-ST2E - page 8

    8 ...

  • Dell 10-ST2E - page 9

    2 Removing and Installing Components This section provides detailed information on how to remove or install the components from your computer. Recommended Tools The procedures in this document may require the following tools: • Small flat-blade screwdriver • #0 Phillips screwdriver • #1 Phillips screwdriver • Small plastic scribe Internal V ...

  • Dell 10-ST2E - page 10

    5. volume button 6. speaker 7. battery 8. docking board 9. coin-cell battery 10. speaker Removing the Base Cover 1. Follow the procedures in Before Working Inside Your Computer . 2. Pry and lift the base cover from the computer by following the arrow sequence in the diagram. Installing the Base Cover 1. Attach the base cover to the computer. 2. Fol ...

  • Dell 10-ST2E - page 11

    Installing the Battery 1. Tighten the screws to secure the battery to the computer. 2. Install the base cover. 3. Follow the procedures in After Working Inside Your Computer. Removing the Front Camera 1. Follow the procedures in Before Working Inside Your Computer . 2. Remove the: a) base cover b) battery 3. Lift up the connector latch and disconne ...

  • Dell 10-ST2E - page 12

    Installing the Front Camera 1. Place the camera module in its slot on the computer. 2. Tighten the screw to secure the camera module to the computer. 3. Connect the camera cable to the connector. 4. Install the: a) battery b) base cover 5. Follow the procedures in After Working Inside Your Computer . Removing the Speakers 1. Follow the procedures i ...

  • Dell 10-ST2E - page 13

    5. Un-route the speaker cable on the side of the computer and lift it up to release the speaker from the computer. 6. Un-route the speaker cable on the side of the computer and lift it up to release the speaker from the computer. 13 ...

  • Dell 10-ST2E - page 14

    Installing the Speakers 1. Place the right and the left speakers in their slot. 2. Route the speaker cables on the chassis. 3. Tighten the screws to secure the speakers to the chassis. 4. Place the coin-cell battery in its slot and route the cables. 5. Connect the speaker connector cable to its port on the system board. 6. Install the : a) battery ...

  • Dell 10-ST2E - page 15

    4. Remove the screws that secure the docking board to the computer. 5. Remove the docking board from the computer and disconnect the home-button board cable. Installing the Docking Board 1. Connect the home-button board cable to the docking board and place the docking board in its slot in the computer. 2. Tighten the screws to secure the docking bo ...

  • Dell 10-ST2E - page 16

    Removing the System Board 1. Follow the procedures in Before Working Inside Your Computer . 2. Remove the: a) base cover b) battery c) speaker d) front camera e) docking board 3. Disconnect the LVDS and docking board cables. 4. Remove the screws that secure the system board to the computer. 5. Lift up the system board at a 45° angle and pull it aw ...

  • Dell 10-ST2E - page 17

    4. Install the: a) docking board b) front camera c) speaker d) battery e) base cover 5. Follow the procedures in After Working Inside Your Computer . Removing the Rear Camera 1. Follow the procedures in Before Working Inside Your Computer . 2. Remove the: a) base cover b) battery c) speaker d) front camera e) system board 3. Remove the camera modul ...

  • Dell 10-ST2E - page 18

    Removing the Coin-Cell Battery 1. Follow the procedures in Before Working Inside Your Computer . 2. Remove the: a) base cover b) battery c) speaker d) front camera e) system board 3. Disconnect the coin-cell battery cable and remove it from the computer. Installing the Coin-Cell Battery 1. Connect the coin-cell battery cable to the system board. 2. ...

  • Dell 10-ST2E - page 19

    b) battery 3. Disconnect the volume-board cable from the connector. Lift up and remove the volume-board cable from the system board. 4. Pry the sides of the volume-button board with a flat-head screw driver to loosen it from it's slot on the computer. Remove the volume-button board from the computer Installing the Volume-Button Board 1. Place ...

  • Dell 10-ST2E - page 20

    20 ...

  • Dell 10-ST2E - page 21

    3 System Setup System Setup enables you to manage your computer hardware and specify BIOS ‐ level options. From the System Setup, you can: • Change the NVRAM settings after you add or remove hardware • View the system hardware configuration • Enable or disable integrated devices • Set performance and power management thresholds • Manage ...

  • Dell 10-ST2E - page 22

    Keystroke Action connected to an optional external USB keyboard) On Screen Mouse Pointer Use this to navigate the System Setup by using your finger or an interactive pen. Apply Icon Save current configuration. Defaults Icon Load setup defaults. Exit Icon Exits System Setup. Boot Menu Press <F12> when the Dell logo appears to initiate a one-ti ...

  • Dell 10-ST2E - page 23

    Table 3. Boot Sequence Option Function File Browser Add Boot Option Displays the order that the BIOS searches devices when trying to find an operating system to boot. A new device can be added here. File Browser Del Boot Option A displayed boot device can be removed from the boot order. Table 4. Date/Time Option Function System Date Displays the sy ...

  • Dell 10-ST2E - page 24

    Option Description Click OK after entering the password details. System Password Allows you to set, change, or delete the computer password (previously called the primary password). The drive does not have a password set by default. To add a new password: • Enter the old password • Enter the new password • Confirm the new password Click OK af ...

  • Dell 10-ST2E - page 25

    Option Description Admin Setup Lockout Allows you to enable or disable the option to enter setup when an admin password is set. • Enable Admin Setup Lockout (Default) Table 8. Secure Boot Option Function Secure Boot Enables or Disables the secure boot feature. Default : Disabled Expert Key Management Allows you to manage all secure boot keys. Tab ...

  • Dell 10-ST2E - page 26

    Option Description • Disabled - Does not allow the system to power on by special LAN signals when it receives a wake-up signal from the LAN or wireless LAN. (Default ) • LAN Only - Allows the system to be powered on by special LAN signals. Table 11. POST Behaviour Option Description Adapter Warnings Allows you to activate the adapter warning me ...

  • Dell 10-ST2E - page 27

    4 Troubleshooting Your Computer You can troubleshoot your computer using indicators like Diagnostic Lights, Beep Codes, and Error Messages during the operation of the computer. Enhanced Pre-boot System Assessment (ePSA) The ePSA is a diagnostic utility available on your computer. This utility includes a series of tests for a computer's hardwar ...

  • Dell 10-ST2E - page 28

    2. The computer will start up and begin running the ePSA utility automatically. 3. During the testing process, you will be prompted to answer a YES or NO question. To respond, press Volume Up = YES or Volume Down = NO. 28 ...

  • Dell 10-ST2E - page 29

    4. Press the Security Button (<Ctrl> + <Alt> + <Del>) to click OK once the tests are completed. 5. The volume up and down buttons can also be used as the <Tab> key when switching between options. Beep Codes The computer may emit a series of beeps during start-up if the display cannot show errors or problems. These series of ...

  • Dell 10-ST2E - page 30

    Code Cause and Troubleshooting Steps System board failure, covers BIOS corruption or ROM error 2 No RAM detected No memory detected 3 Chipset Error (North and South Bridge Chipset, DMA/IMR/ Timer Error) , Time-Of-Day Clock test failure , Gate A20 failure , Super I/O chip failure , Keyboard controller test failure System board failure 4 RAM Read/Wri ...

  • Dell 10-ST2E - page 31

    Code Cause and Troubleshooting Steps 6 Video BIOS test failure Video card failure 7 CPU - cache test failure Processor failure 8 Display Display failure 31 ...

  • Dell 10-ST2E - page 32

    32 ...

  • Dell 10-ST2E - page 33

    5 Specifications Specifications NOTE: Offerings may vary by region. The following specifications are only those required by law to ship with your computer. For more information regarding the configuration of your computer, click Start → Help and Support and select the option to view information about your computer. System Information Chipset Inte ...

  • Dell 10-ST2E - page 34

    Video Video type integrated Data bus internal Video controller Intel Graphics Media Accelerator Communications Network adapter USB 2.0 based Gigabit LAN via dock Ports and Connectors Audio one microphone-in and stereo headphones/speakers combo connector Video one mini HDMI connector USB one USB 2.0 connector Memory card reader one 3-in-1 memory car ...

  • Dell 10-ST2E - page 35

    Battery Width 86.50 mm (3.40 inches) Weight 220.00 g (0.49 lb) Voltage 7.4 VDC Temperature range Operating 0 °C to 50 °C (32° F to 158 °F) Non-Operating -20 °C to 65 °C ( –4 °F to 149 °F) Coin-cell battery 3 V CR2025 lithium ion AC Adapter Type Input voltage 100 VAC to 240 VAC Input current (maximum) 0.87 A Input frequency 50 Hz to 60 Hz ...

  • Dell 10-ST2E - page 36

    Environmental Operating –16 m to 3048 m (–50 to 10,000 ft) Non-operating –15.2 m to 10,668 m (–50 ft to 35,000 ft) Airborne contaminant level G1 as defined by ISA-71.04–1985 36 ...

  • Dell 10-ST2E - page 37

    6 Contacting Dell Contacting Dell NOTE: If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or Dell product catalog. Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some services may not be avail ...

Производитель Dell Категория Personal Computer

Документы, которые мы получаем от производителя устройства Dell 10-ST2E мы можем разделить на несколько групп. Это в частности:
- технические чертежи Dell
- инструкции обслуживания 10-ST2E
- паспорта изделия Dell
- информационные брошюры
- энергетические этикетки Dell 10-ST2E
Все из них важны, однако самую важную информацию с точки зрения пользователя мы найдем в инструкции обслуживания Dell 10-ST2E.

Группа документов, определяемая как инструкции обслуживания, делится также на более подробные типы, такие как: Инструкции монтажа Dell 10-ST2E, инструкции обслуживания, короткие инструкции или инструкции пользователя Dell 10-ST2E. В зависимости от потребностей, Вам необходимо поискать требуемый документ. На нашем сайте Вы можете просмотреть самую популярную инструкцию использования изделия Dell 10-ST2E.

Похожие инструкции обслуживания

Полная инструкция обслуживания устройства Dell 10-ST2E, как должна выглядеть?
Инструкция обслуживания, определяемая также как пособие пользователя, или просто "руководство" - это технический документ, цель которого заключается в использовании Dell 10-ST2E пользователями. Инструкции пишет, как правило технический писатель, языком, доступным для всех пользователей Dell 10-ST2E.

Полная инструкция обслуживания Dell, должна заключать несколько основных элементов. Часть из них менее важная, как например: обложка / титульный лист или авторские страницы. Однако остальная часть, должна дать нам важную с точки зрения пользователя информацию.

1. Вступление и рекомендации, как пользоваться инструкцией Dell 10-ST2E - В начале каждой инструкции, необходимо найти указания, как пользоваться данным пособием. Здесь должна находится информация, касающаяся местонахождения содержания Dell 10-ST2E, FAQ и самых распространенных проблем - то есть мест, которые чаще всего ищут пользователи в каждой инструкции обслуживания
2. Содержание - индекс всех советов, касающихся Dell 10-ST2E, которое найдем в данном документе
3. Советы по использованию основных функций устройства Dell 10-ST2E - которые должны облегчить нам первые шаги во время использования Dell 10-ST2E
4. Troubleshooting - систематизированный ряд действия, который поможет нам диагностировать а в дальнейшем очередность решения важнейших проблем Dell 10-ST2E
5. FAQ - чаще всего задаваемые вопросы
6. Контактные данные Информация о том, где искать контактные данные производителя / сервисного центра Dell 10-ST2E в данной стране, если самостоятельно не получится решить проблему.

У вас вопрос, касающийся Dell 10-ST2E?

Воспользуйтесь формуляром, находящимся ниже

Если с помощью найденной инструкции Вы не решили свою проблему с Dell 10-ST2E, задайте вопрос, заполнив следующий формуляр. Если у какого то из пользователей была похожая проблема с Dell 10-ST2E со всей вероятностью он захочет поделиться методом ее решения.

Перепишите текст с картинки

Captcha
Новая картинка

Комментарии (0)