Инструкция обслуживания Sealife DC500

8 страниц 1.08 mb
Скачать

Перейти на страницу of 8

Summary
  • Sealife DC500 - page 1

    DC500 Troubleshooting Updates February 2, 2006 Q – My battery does not last long and runs out after only one dive or about 50 pictures. A – The DC500 uses the most powerful lithium rechargeable battery available. With a freshly charged battery, you should get about 1.5 hours of use or about 100 pictures with proper power management. Here are so ...

  • Sealife DC500 - page 2

    IF the date code is A through J, check to see that the two black rubber caps are in place. Without these in place the camera is not sitting properly and out of reach of the shutter button. If any of the rubber caps are missing, SeaLife can ship out a new rubber caps that the consumer can replace (Item# SL11052). IF the date code is equal to K or gr ...

  • Sealife DC500 - page 3

    Q –The Flash Link Adapter keeps popping off, when using TWO strobes, A – The Flash Link adapter grabs around the lens port but can be pulled off under excessive stress. To avoid this it is important to feed the Flash Link cables up from under the camera and up into the adapter, so the cable is relaxed and not pulling on the adapter. It may also ...

  • Sealife DC500 - page 4

    2. The camera will set the focus on the subject located in the center of the picture. Align the square located in the center of the LCD over the subject. Subjects outside this square may not be in focus if they are closer or farther away. The depth of field for close-up pictures is only a few inches. 3. The camera’s auto focus system needs light ...

  • Sealife DC500 - page 5

    2. Set Digital Flash Pre-Flash switch to “0”. Make sure Camera and External Flash batteries are fully charged. Turn Flash to ON and wait for green ready-light to turn on. 3. Here’s an easy test to make sure the External Flash is firing and synchronized with the camera. Take a picture of the External Flash, pointing the camera at the flash sen ...

  • Sealife DC500 - page 6

    d. Slowly tighten the screw in _ turn increments using the Allen wrench provided. Pull on the cable after every _ turn until it’s secure. Be very careful not to over tighten the screw or you will damage the cable. If you think you may have over-tightened the screw, loosen the screw and inspect the cable. If the cable is crushed, cut off the end o ...

  • Sealife DC500 - page 7

    Secure cable around flash arm or, secure cable to arm using a zip tie g. Don’t forget to insert black rubber sensor cover over flash sensor located farthest from the camera. h. Take a few test pictures to make sure the External Flash fires. i. If you still experience a flash firing issue after reviewing the above information, please send the came ...

  • Sealife DC500 - page 8

    3) Format the camera’s internal memory and SD memory card. The Format function is located in Set-Up mode menu. 4) Report the camera lock-up issue to the SeaLife Service center. Email: service@sealife-cameras.com . Q – The black rubber tube ring (flashguard) in the lens port area comes out. Is this normal? A – Yes, this part is designed to be ...

Производитель Sealife Категория Digital Camera

Документы, которые мы получаем от производителя устройства Sealife DC500 мы можем разделить на несколько групп. Это в частности:
- технические чертежи Sealife
- инструкции обслуживания DC500
- паспорта изделия Sealife
- информационные брошюры
- энергетические этикетки Sealife DC500
Все из них важны, однако самую важную информацию с точки зрения пользователя мы найдем в инструкции обслуживания Sealife DC500.

Группа документов, определяемая как инструкции обслуживания, делится также на более подробные типы, такие как: Инструкции монтажа Sealife DC500, инструкции обслуживания, короткие инструкции или инструкции пользователя Sealife DC500. В зависимости от потребностей, Вам необходимо поискать требуемый документ. На нашем сайте Вы можете просмотреть самую популярную инструкцию использования изделия Sealife DC500.

Похожие инструкции обслуживания

Полная инструкция обслуживания устройства Sealife DC500, как должна выглядеть?
Инструкция обслуживания, определяемая также как пособие пользователя, или просто "руководство" - это технический документ, цель которого заключается в использовании Sealife DC500 пользователями. Инструкции пишет, как правило технический писатель, языком, доступным для всех пользователей Sealife DC500.

Полная инструкция обслуживания Sealife, должна заключать несколько основных элементов. Часть из них менее важная, как например: обложка / титульный лист или авторские страницы. Однако остальная часть, должна дать нам важную с точки зрения пользователя информацию.

1. Вступление и рекомендации, как пользоваться инструкцией Sealife DC500 - В начале каждой инструкции, необходимо найти указания, как пользоваться данным пособием. Здесь должна находится информация, касающаяся местонахождения содержания Sealife DC500, FAQ и самых распространенных проблем - то есть мест, которые чаще всего ищут пользователи в каждой инструкции обслуживания
2. Содержание - индекс всех советов, касающихся Sealife DC500, которое найдем в данном документе
3. Советы по использованию основных функций устройства Sealife DC500 - которые должны облегчить нам первые шаги во время использования Sealife DC500
4. Troubleshooting - систематизированный ряд действия, который поможет нам диагностировать а в дальнейшем очередность решения важнейших проблем Sealife DC500
5. FAQ - чаще всего задаваемые вопросы
6. Контактные данные Информация о том, где искать контактные данные производителя / сервисного центра Sealife DC500 в данной стране, если самостоятельно не получится решить проблему.

У вас вопрос, касающийся Sealife DC500?

Воспользуйтесь формуляром, находящимся ниже

Если с помощью найденной инструкции Вы не решили свою проблему с Sealife DC500, задайте вопрос, заполнив следующий формуляр. Если у какого то из пользователей была похожая проблема с Sealife DC500 со всей вероятностью он захочет поделиться методом ее решения.

Перепишите текст с картинки

Комментарии (0)