-
Fujitsu P42-1A - page 1
A26361-K1040-Z120-1-M119, edition 3 English Contents Introduction ........................................................................................................................................... 1 Notational conventions ......................................................................................................... ........ 2 Im ...
-
Fujitsu P42-1A - page 2
Contents English A26361-K1040-Z120-1-M119, edition 3 Technical data ................................................................................................................. .................... 33 VESA-DDC-compatible VGA interface ....................................................................................... 35 Preset operating mo ...
-
Fujitsu P42-1A - page 3
A26361-K1040-Z120-1-M119, edition 3 English - 1 Introduction Your new plasma TV MY RICA P42-1A / P42-2 / P50-2possesses a whole range of useful features and functions, e.g.: ● TFT monitor (Thin Film Transistor; ac tive matrix) ● analogue tuner for VHF, UHF and cable programmes ● connections for SCART (v ideo and RGB), video and S-Video ● mi ...
-
Fujitsu P42-1A - page 4
MYRICA P42-1A / P42-2 / P50-2 2 - English A26361-K1040-Z120-1-M119, edition 3 Notational conventions The meanings of the symbols and fonts used in this manual are as follows: ! Pay particular attention to text marked with th is symbol. Failure to observe this w arning endangers your life, destroys the device, or may lead to loss of data. i Suppleme ...
-
Fujitsu P42-1A - page 5
MYRICA P42-1A / P42-2 / P50-2 A26361-K1040-Z120-1-M119, edition 3 English - 3 ● The device may not be placed on the floor. ● he device automatically sets itself to the correct voltage within the range from 100 V to 240 V. Ensure that the local mains vo ltage lies within these limits. ● Ensure that the power socket on the device or the earthed ...
-
Fujitsu P42-1A - page 6
MYRICA P42-1A / P42-2 / P50-2 4 - English A26361-K1040-Z120-1-M119, edition 3 Cleaning ● Remove the power plug before cleaning the device. ● Do not clean any interior parts yourself, leave this job to a service technician. ● Do not use any cleaning agents that cont ain abrasives or may corrode plastic. ● Ensure that no liquid will run into ...
-
Fujitsu P42-1A - page 7
MYRICA P42-1A / P42-2 / P50-2 A26361-K1040-Z120-1-M119, edition 3 English - 5 Disposal and recycling This device has been manufactured to the highes t possible degree from materials which can be recycled or disposed of in a manner that is not environmentally damaging. The device may be taken back after use to be recycled, provided that it is return ...
-
Fujitsu P42-1A - page 8
MYRICA P42-1A / P42-2 / P50-2 6 - English A26361-K1040-Z120-1-M119, edition 3 Preparing remove control Inserting batteries ► Open the back cover of the remote control by sliding it in the direction of the arrow. ► Place the batteries supplied in the battery compartment. Ensure correct polarity. ► Close the battery compartment by sliding the c ...
-
Fujitsu P42-1A - page 9
MYRICA P42-1A / P42-2 / P50-2 A26361-K1040-Z120-1-M119, edition 3 English - 7 Installing plasma TV Before you install your plasma TV, y ou must mount the foot on the device. i The foot is shown as an example in the following illustrations. The delivered foot may differ from the illustration. ► Lay the plasma TV on a smooth, clean work surface wit ...
-
Fujitsu P42-1A - page 10
MYRICA P42-1A / P42-2 / P50-2 8 - English A26361-K1040-Z120-1-M119, edition 3 ► Screw on the shafts of the foot through the holes on the device. Use the screws provided for this purpose. You can now place the plasma TV in the upright position. The device may not be placed on the floor. Downloaded From TV-Manual.com Manuals ...
-
Fujitsu P42-1A - page 11
MYRICA P42-1A / P42-2 / P50-2 A26361-K1040-Z120-1-M119, edition 3 English - 9 Ventilation ! To ensure sufficient ventilation, the intake and exhaust air openings of the device must never be blocked. >10 cm >20 cm >20 cm >10 cm >10 cm >10 cm When installing the TV in niches, maintain the minimum distance for sufficient ventilation ...
-
Fujitsu P42-1A - page 12
MYRICA P42-1A / P42-2 / P50-2 10 - English A26361-K1040-Z120-1-M119, edition 3 Connections on plasma TV ! Observe the safety precautions in the "Important notes" chapter in this operating manual. Do not cover the ventilation openings of the monitor. Never open the housing of the power suppl y unit. There is extreme danger from an electric ...
-
Fujitsu P42-1A - page 13
MYRICA P42-1A / P42-2 / P50-2 A26361-K1040-Z120-1-M119, edition 3 English - 11 PC IN (blue) Connection for analogue VGA input signals e.g. for a PC with an analogue output (D-SUB) COMPONENT 1 COMPONENT 2 Y - green Pb - blue Pr - red AUDIO white (left) red (right) Connections for component video and audio input signals e.g. for HDTV decoder, HDTV vi ...
-
Fujitsu P42-1A - page 14
MYRICA P42-1A / P42-2 / P50-2 12 - English A26361-K1040-Z120-1-M119, edition 3 S-VIDEO IN Connection for S-VIDEO input signals e.g. for DVD player, video recorder or film camera with S- Video connection AV: VIDEO yellow AUDIO white (left) red (right) Connections for video and audio input signals e.g. for DVD player, video recorder, film camera with ...
-
Fujitsu P42-1A - page 15
MYRICA P42-1A / P42-2 / P50-2 A26361-K1040-Z120-1-M119, edition 3 English - 13 Connecting plasma TV Connecting antenna ► Connect an antenna cable to the antenna connection of the plasma TV and to the TV antenna socket. Connecting the power supply ► Plug the power cable supplied into the power connector of the LCD TV. You will find the pow er co ...
-
Fujitsu P42-1A - page 16
MYRICA P42-1A / P42-2 / P50-2 14 - English A26361-K1040-Z120-1-M119, edition 3 Switching plasma TV on/off ► Press the ON/OFF switch at the left on the back of the plasma TV. Switching plasma TV on/into standby mode ► Press the Standby button at the right on the underside of the plasma TV. From the indicator at the lower right on the front of th ...
-
Fujitsu P42-1A - page 17
MYRICA P42-1A / P42-2 / P50-2 A26361-K1040-Z120-1-M119, edition 3 English - 15 Setting language of the OSD menu After switching on the device, set the language of the OSD (On Screen Display) menu according to your needs. English is the set as the default setti ng. If you want to use a different language, change this setting with the OSD menu. ► S ...
-
Fujitsu P42-1A - page 18
MYRICA P42-1A / P42-2 / P50-2 16 - English A26361-K1040-Z120-1-M119, edition 3 ► Press the MENU button to activate the menu item. ► Select the Auto Scan menu item using the button. ► Press the MENU button to activate the menu item. ► Select your country w ith the button. ► Press the MENU button to start the programme search. Wait until th ...
-
Fujitsu P42-1A - page 19
MYRICA P42-1A / P42-2 / P50-2 A26361-K1040-Z120-1-M119, edition 3 English - 17 Arranging programmes With the OSD menu you can rearrange the order of the programmes according to your personal preferences. Moving programme ► Select the programme you want to move with the buttons / . ► Press the INSERT button (yellow) to mark the programme to be m ...
-
Fujitsu P42-1A - page 20
MYRICA P42-1A / P42-2 / P50-2 18 - English A26361-K1040-Z120-1-M119, edition 3 Setting channel of a programme This function is used when a programme is transmitted on a new station frequency. ► Select the programme for which you want to set another channel w ith the buttons / . ► Mark the property CH with the buttons / . ► Select the desired ...
-
Fujitsu P42-1A - page 21
MYRICA P42-1A / P42-2 / P50-2 A26361-K1040-Z120-1-M119, edition 3 English - 19 Deleting program ► Select the programme you want to delete with the buttons / . ► Press the ERASE button (red). The selected pr ogramme is deleted from the programme list. Selecting signal source Selecting signal source for main display ► Press the SOURCE button in ...
-
Fujitsu P42-1A - page 22
MYRICA P42-1A / P42-2 / P50-2 20 - English A26361-K1040-Z120-1-M119, edition 3 Operation Controls are provided on the device and the re mote control for operating the plasma TV. Operating elements on the device The operating controls of the plasma TV are lo cated in the underside of the device. With these buttons you can operate the basic functions ...
-
Fujitsu P42-1A - page 23
MYRICA P42-1A / P42-2 / P50-2 A26361-K1040-Z120-1-M119, edition 3 English - 21 Changing the device settings with the buttons of the control panel With the buttons on the control panel, you can make the following settings directly: Selecting picture signal source ► Press the INPUT SELECT button. A list of the signal sources is displayed. ► Choos ...
-
Fujitsu P42-1A - page 24
MYRICA P42-1A / P42-2 / P50-2 22 - English A26361-K1040-Z120-1-M119, edition 3 Remote control 1 2 3 4 5 6 7 8 9 11 13 14 12 10 15 18 16 17 19 20 1 = POWER - switches the device on or into the standby mode. 2 = INFO - information You display the current settings w ith this button. 3 = MUTE - switches the sound on and off. 4 = PICTURE With this butto ...
-
Fujitsu P42-1A - page 25
MYRICA P42-1A / P42-2 / P50-2 A26361-K1040-Z120-1-M119, edition 3 English - 23 Teletext With button 13 you switch Teletext on or off. With the buttons 21 , 23 , 24 and 25 you navigate in the Teletext function. Buttons for editing programme list The detailed description of editing the programme list is pr ovided under "Adjusting programme setti ...
-
Fujitsu P42-1A - page 26
MYRICA P42-1A / P42-2 / P50-2 24 - English A26361-K1040-Z120-1-M119, edition 3 Changing device settings with remote control You can open and operate the integrated OSD (On Screen Display) menu w ith the remote control. To set the OSD menu, perform the following steps: ► Press the MENU button to open the OSD menu. ► Mark the desired menu item wi ...
-
Fujitsu P42-1A - page 27
MYRICA P42-1A / P42-2 / P50-2 A26361-K1040-Z120-1-M119, edition 3 English - 25 PICTURE menu - picture settings ► Press the MENU button to open the OSD menu. ► Mark the PICTURE menu item with the / buttons. ► Press the MENU button to activate the menu item. The buttons available to you for setting t he options are shown in the menu footer. Mod ...
-
Fujitsu P42-1A - page 28
MYRICA P42-1A / P42-2 / P50-2 26 - English A26361-K1040-Z120-1-M119, edition 3 SOUND menu - sound settings ► Press the MENU button to open the OSD menu. ► Mark the SOUND menu item with the / buttons. ► Press the MENU button to activate the menu item. The buttons available to you for setting t he options are shown in the menu footer. Balance W ...
-
Fujitsu P42-1A - page 29
MYRICA P42-1A / P42-2 / P50-2 A26361-K1040-Z120-1-M119, edition 3 English - 27 SETUP menu - advanced settings ► Press the MENU button to open the OSD menu. ► Mark the SETUP menu item with the / buttons. ► Press the MENU button to activate the menu item. The buttons available to you for setting t he options are shown in the menu footer. Transl ...
-
Fujitsu P42-1A - page 30
MYRICA P42-1A / P42-2 / P50-2 28 - English A26361-K1040-Z120-1-M119, edition 3 Here you configure the advanced settings. ID Here you set an ID number for service purposes. Possible values: 0 - 99 Burn Protect With this function you can partially prevent still images from burning in. Possible values: On , Off Warning: Avoid still images on the scree ...
-
Fujitsu P42-1A - page 31
MYRICA P42-1A / P42-2 / P50-2 A26361-K1040-Z120-1-M119, edition 3 English - 29 TIME menu - time settings ► Press the MENU button to open the OSD menu. ► Mark the Time menu item with the / buttons. ► Press the MENU button to activate the menu item. The buttons available to you for setting t he options are shown in the menu footer. MYRICA P42-1 ...
-
Fujitsu P42-1A - page 32
MYRICA P42-1A / P42-2 / P50-2 30 - English A26361-K1040-Z120-1-M119, edition 3 TV menu - programme settings ► Press the MENU button to open the OSD menu. ► Mark the TV menu item with the / buttons. ► Press the MENU button to activate the menu item. The buttons available to you for setting t he options are shown in the menu footer. Auto Scan W ...
-
Fujitsu P42-1A - page 33
MYRICA P42-1A / P42-2 / P50-2 A26361-K1040-Z120-1-M119, edition 3 English - 31 Display modes Main display mode ► Press the SOURCE button on the remote control or the INPUT SELECT button on the underside of the plasma TV to select the source fr om which the signal for the main display is to come. For the main display you can select one of the foll ...
-
Fujitsu P42-1A - page 34
MY RICA P42-1A / P42-2 / P50-2 32 - Englis h A26361-K1040-Z120-1-M119, edit ion 3 PIP mode (Picture in Picture) The plasm a TV can als o display a s ub-video signal i n addition to t he main vi deo signal. The s ub- video signal i s shown as a "P IP dis play" in a window on the mai n display. The following buttons of the rem ote cont rol ...
-
Fujitsu P42-1A - page 35
MYRICA P42-1A / P42-2 / P50-2 A26361-K1040-Z120-1-M119, edition 3 English - 33 Technical data MYRICA P42-1A MYRICA P42-2 MYRICA P50-2 Screen: Size (diagonal) 42'' (107 cm) 42'' (107 cm) 50'' (126.9 cm) Visible picture (HxV): 934 mm x 532.2 mm 934 mm x 532.2 mm 1,107 mm x 622 mm Number of pixels (HxV): 852 x 480 1024 x ...
-
Fujitsu P42-1A - page 36
MYRICA P42-1A / P42-2 / P50-2 34 - English A26361-K1040-Z120-1-M119, edition 3 MYRICA P42-1A MYRICA P42-2 MYRICA P50-2 DVI: TMDS ( DVI-D) Power supply (AC): 100 - 240 V (50/60 Hz) 2 A / 240 V 4.6 A / 100 V 100 - 240 V (50/60 Hz) 2 A / 240 V 4.6 A / 100 V 100 - 240 V (50/60 Hz) 2 A / 240 V 5 A / 100 V Power consumption: typical: 300 W Standby < 5 ...
-
Fujitsu P42-1A - page 37
MYRICA P42-1A / P42-2 / P50-2 A26361-K1040-Z120-1-M119, edition 3 English - 35 VESA-DDC-compatible VGA interface Your plasma TV is equipped with a VESA-DDC-compat ible VGA interface and a DVI-D interface. VESA-DDC (Video Electronics Standard Association, Display Data Channel) is used as the communications interface between the plasma TV and the com ...
-
Fujitsu P42-1A - page 38
MYRICA P42-1A / P42-2 / P50-2 36 - English A26361-K1040-Z120-1-M119, edition 3 PC Analogue (D-SUB) 1 5 6 10 11 15 Pin Meaning Pin Meaning 1 Video input red 9 +5 V (DDC) 2 Video input green 10 Sync. earth 3 Video input blue 11 Earth 4 Earth 12 DDC-Data 5 Earth 13 H. sync 6 Red video earth 14 V. sync 7 Green video earth 15 DDC Clock 8 Blue video eart ...
-
Fujitsu P42-1A - page 39
MYRICA P42-1A / P42-2 / P50-2 A26361-K1040-Z120-1-M119, edition 3 English - 37 SCART (Half/Full) Pin Meaning Pin Meaning Pin Meaning 1 Sound (R) output 8 Changeover voltage 15 Red *) 2 Sound (R) input 9 Green earth *) 16 Blanking *) 3 Sound (L) output 10 Not assigned 17 Video output earth 4 Sound signal earth 11 Green *) 18 Video input earth 5 Blue ...
-
Fujitsu P42-1A - page 40
MYRICA P42-1A / P42-2 / P50-2 38 - English A26361-K1040-Z120-1-M119, edition 3 Colour and transmission system by country Country TV Colour Stereo Subtitles Albania B/G PAL Austria B/G PAL FM-FM Teletext Azores B PAL Bahrain B PAL Belgium B/G PAL Nicam Teletext Bulgaria D SECAM Canary Islands B PAL Croatia B/H PAL Cyprus B PAL Czech Republic D/K SEC ...
-
Fujitsu P42-1A - page 41
MYRICA P42-1A / P42-2 / P50-2 A26361-K1040-Z120-1-M119, edition 3 English - 39 Norway B/G PAL Nicam Country TV Colour Stereo Subtitles Poland D/K PAL Teletext Portugal B/G PAL Teletext Rumania G PAL Russia D/K SECAM Saudi Arabia B SECAM Slovakia D/K SECAM / PAL Slovenia B/H PAL South Africa I PAL Spain B/G PAL Nicam Teletext Sweden B/G PAL Nicam Te ...
-
Fujitsu P42-1A - page 42
MYRICA P42-1A / P42-2 / P50-2 40 - English A26361-K1040-Z120-1-M119, edition 3 Troubleshooting Should an error occur, first check the following point s. If the distortion is still not eliminated, the plasma TV should, if possible, be checked on another signal source and/or with another data cable. If you are unable to solve the problem, please info ...
-
Fujitsu P42-1A - page 43
MYRICA P42-1A / P42-2 / P50-2 A26361-K1040-Z120-1-M119, edition 3 English - 41 Troubleshooting in TV mode Having this problem? Check the following points: No sound ► Check the volume setting. ► Check whether the device is muted. No picture, only static ► Check that the antenna cable is correctly connected. Reception may be poor. The picture i ...
-
Fujitsu P42-1A - page 44
MYRICA P42-1A / P42-2 / P50-2 42 - English A26361-K1040-Z120-1-M119, edition 3 Troubleshooting in PC mode Having this problem? Check the following points: Message: No Signal / Keine Eingabe ► Check the setting of the picture signal source. ► Check whether the antenna or data cable is correctly connected. Message: Out of range The input signal ( ...
У вас вопрос, касающийся Fujitsu P42-1A?
Воспользуйтесь формуляром, находящимся ниже
Если с помощью найденной инструкции Вы не решили свою проблему с Fujitsu P42-1A, задайте вопрос, заполнив следующий формуляр. Если у какого то из пользователей была похожая проблема с Fujitsu P42-1A со всей вероятностью он захочет поделиться методом ее решения.