-
Roberts Radio R9958 - page 1
MW/FM PLL Synthesised Splash Proof Radio Please read this manual before use ROBER TS Sound for Generations R9958 ...
-
Roberts Radio R9958 - page 2
Controls ........................................................................... 2-4 Battery operation .................................................................5 Operation via AC adaptor (not supplied) .............................6 Using the fi xing brackets .....................................................7 FM wire aerial compart ...
-
Roberts Radio R9958 - page 3
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) Controls (Front) 10 8 1 1. On/Off/Auto off button 2. Band/time set button 3. T uning up button 4. T uning down button 5. V olume up button 6. V olume down button 7. Speaker 8. Preset buttons 9. LCD display 10. Nap timer button 9 2 3 4 5 6 7 2 ...
-
Roberts Radio R9958 - page 4
Controls 1 1. Battery compartment 12. Battery compartment door 13. FM wire aerial compartment 13 11 12 14 15 14. DC input socket 15. Bracket holders x 2 16. Swivel hanger/handle 16 3 (Back) ...
-
Roberts Radio R9958 - page 5
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) a ce d f g a. Battery power status b. V olume level indicator c. Auto Off indicator d. Nap timer indicator e. Memory number and seconds indicator f. T ime and frequency indicator g. Band indicator b 17. Poolside torch LED 18. Poolside LED torch button ...
-
Roberts Radio R9958 - page 6
Battery operation 1. Release the catch securing the rear battery compartment door of your radio and lift up the battery compartment cover . 2. Insert two LR20 (D size) batteries into the spaces in the compartment. T ake care to ensure all batteries are inserted with the correct polarity as shown inside the battery compartment. Replace the battery c ...
-
Roberts Radio R9958 - page 7
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) Operation via an AC adaptor (not supplied) The AC adaptor for use with the R9958 should provide 3 volts DC output at 300 mA centre pin positive. 1. Insert the adaptor plug into the DC in socket on the left hand side of your radio. 2. Plug the adaptor i ...
-
Roberts Radio R9958 - page 8
Using the fi xing brackets The radio is supplied with a mounting bracket to allow wall mounting (for example in a bathroom). 1. Use the bracket as a template to mark the hole positions before drill- ing. T ake care to ensure that there are no cables or pipes in the wall near the hole locations. 2. Use screw fi xings appropriate to the wall type. ...
-
Roberts Radio R9958 - page 9
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) Swivel hanger/handle Using the multi-purpose handle, you may hang or carry the radio when not used in a bathroom. IMPORT ANT : If the handle is used to hang the radio, make sure that the handle is locked with the loop closed so that the radio cannot fa ...
-
Roberts Radio R9958 - page 10
Setting the clock 1. The clock will start running when the batteries are installed or when the radio is connected to the mains supply . The display will show " -:--" . 2. The time must be set with your radio switched to the off position. 3. Press and hold down the Time set button until the hour digits fl ash in the display and a beep can ...
-
Roberts Radio R9958 - page 11
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) Operating your radio Y our radio is equipped with three tuning methods:- Manual tuning, Auto scan tuning and Memory preset tuning. Auto scan tuning 1. Press the On/Off button to switch on your radio. 2. Select the required waveband by repeatedly pressi ...
-
Roberts Radio R9958 - page 12
Manual tuning 1. Press the On/Off button to switch on your radio. 2. Select the required waveband by repeatedly pressing the Band but- ton. For the FM waveband fully extend the wire aerial and position for optimum reception. For MW reception there is a built in ferrite aerial. Rotate your radio to the position giving best reception. 3. A single pre ...
-
Roberts Radio R9958 - page 13
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) Storing stations in preset memories There are 5 memory presets for each waveband. 1. Press the On/Off button to switch on your radio. 2. T une to the required station using one of the methods previously described. 3. Press and hold down the required Pr ...
-
Roberts Radio R9958 - page 14
Recalling preset stations 1. Press the On/Off button to switch on your radio. 2. Select the required waveband by repeatedly pressing the Band but- ton. 3. Momentarily press the required Preset button , the preset number and station frequency will appear in the display . 1 3 2 13 ...
-
Roberts Radio R9958 - page 15
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) Adjustable sleep timer Y our radio can be set to turn off after a preset time has elapsed. The sleep setting can be adjusted between 10 and 60 minutes in 10 minute increments. 1. Press and hold the On/Off button , the display will cycle through the ava ...
-
Roberts Radio R9958 - page 16
Adjustable Nap timer The nap timer facility allows you to set the radio to wake you after a pre- determined interval - (up to 2 hours). 1. The nap timer can be set with your radio switched on or off. 2. Press the Nap timer button the current nap time will fl ash. 3. Press the Tuning up or down buttons to choose the required nap time in minutes. 4. ...
-
Roberts Radio R9958 - page 17
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) 16 Recalling preset nap timer settings Y our radio has fi ve nap timer settings stored in memory . 1. Press and release the Nap timer button . 2. Momentarily press the required Preset button , the preset number and nap timer setting will appear in the ...
-
Roberts Radio R9958 - page 18
Recalling selected nap timer settings in preset memories 1. Press and release the Nap timer button . 2. Momentarily press the required Preset button , the preset number and nap timer setting will appear in the display 3. Press the Nap timer button again to complete the setting. The timer will begin to count down. 2 17 2 Storing Nap timer settings i ...
-
Roberts Radio R9958 - page 19
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) T uning step size In Europe and other parts of the world MW tuning steps are 9kHz, in America the MW tuning step size is 10kHz. On FM tuning steps can be set to either 50 or 100kHz. 1. Ensure that your radio is switched off. 2. Press and hold down the ...
-
Roberts Radio R9958 - page 20
Poolside alarm Y our radio has a built in alarm buzzer for emergencies. The alarm is to be used if you require help. 1. Press the Poolside alarm button to activate the buzzer . 2. Press the Alarm button again to stop the buzzer . • The poolside alarm can be used with the radio in the on or off posi- tion. Poolside LED torch Y our radio has a buil ...
-
Roberts Radio R9958 - page 21
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) Carrying strap Y our radio is supplied with a carrying strap. 1. The strap is fi tted as shown in the diagram below . 2. Ensure that the free end of the strap is completely through the buckle before using the strap to carry the radio. 20 ...
-
Roberts Radio R9958 - page 22
Display backlight 1. The display backlight will be switched on for approximately 15 seconds when any button is pressed. General Do not allow this radio to be exposed to water (but see splash proof above), steam or sand. Do not leave your radio where excessive heat could cause damage such as in a parked car where the heat from the sun can build up e ...
-
Roberts Radio R9958 - page 23
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) Circuit Features Loudspeaker 76mm 8ohm full range Output Power 500mW Aerial System FM Wire aerial MW Ferrite Rod Specifi cations Power Requirements Mains DC 3 V olts 300mA mains power adaptor centre pin positive (+). (not supplied) Batteries 2 x LR20 ...
-
Roberts Radio R9958 - page 24
ROBERTS RADIO TECHNICAL SER VICES 97-99 Worton Road Isleworth Middlesex TW7 6EG T echnical Helpline :- 020 8758 0338 (Mon-Fri during offi ce hours) Website: http://www .robertsradio.co.uk Issue 1 Guarantee This instrument is guaranteed for twelve months from the date of delivery to the original owner against failure due to faulty w orkmanship or c ...
У вас вопрос, касающийся Roberts Radio R9958?
Воспользуйтесь формуляром, находящимся ниже
Если с помощью найденной инструкции Вы не решили свою проблему с Roberts Radio R9958, задайте вопрос, заполнив следующий формуляр. Если у какого то из пользователей была похожая проблема с Roberts Radio R9958 со всей вероятностью он захочет поделиться методом ее решения.