-
Mackie 800R - page 1
OWNER’S MANUAL PREMIUM EIGHT CHANNEL MICROPHONE PREAMP w/192 kHz DIGIT AL OUTPUT ...
-
Mackie 800R - page 2
2 ONYX 800R ONYX 800R 1. Read these instuctions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water . 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’ s instructions. 8. Do not install near any heat sources such a ...
-
Mackie 800R - page 3
Part No. 0008666 Rev . A 4/04 ©2004 LOUD T echnologies Inc. All Rights Reserved. 3 Owner’ s Manual Owner’ s Manual Don’t forget to visit our website at www .mackie.com for more information about this and other Mackie products. T able of Contents Intr oduction ................................................................................... ...
-
Mackie 800R - page 4
4 ONYX 800R ONYX 800R Introduction Thank you for choosing a Mackie Onyx 800R eight- channel professional microphone preamplifi er . The Onyx Series of mixers and microphone preamps ar e designed for the digital era and offer the newest features and latest technologies for live sound reinforcement and analog or digital studio recording in a durable ...
-
Mackie 800R - page 5
5 Owner’ s Manual Owner’ s Manual Getting Started READ THIS P AGE!! Even if you’re one of those people who never reads manuals, all we ask is that you read this page now befor e you begin using the Onyx 800R. Y ou’ll be glad you did! Zero the Controls 1. T urn down the channel GAIN controls. 2. Set all push button switches to their “out? ...
-
Mackie 800R - page 6
6 ONYX 800R ONYX 800R SIDE MID OPTICAL OUT 88.2/ 96kHz 176.4/ 192k Hz 44.1/48kHz 1-8 1-8 1-4 5-8 1-2 3-4 ANALOG MICROPHONE PREAMP WITH 192kHz DIGITAL OUTPUT BALANCED LINE LEVEL INPUT BALANCED LINE LEVEL OUTPUT AES/EBU OR S/PDIF OUT AES/EBU = 110 Ω / PRO SPDIF = 75 Ω / CONSUMER ~ 100-240 VAC 50-60Hz 105W 87654321 110 Ω 75 Ω NORMAL MID/SIDE P ...
-
Mackie 800R - page 7
7 Owner’ s Manual Owner’ s Manual Onyx 800R Multitrac k Recording with a P or tastudio (Trac king) SIDE MID OPTICAL OUT 88.2/ 96kHz 176.4/ 192k Hz 44.1/48kHz 1-8 1-8 1-4 5-8 1-2 3-4 ANALOG MICROPHONE PREAMP WITH 192kHz DIGITAL OUTPUT BALANCED LINE LEVEL INPUT BALANCED LINE LEVEL OUTPUT AES/EBU OR S/PDIF OUT AES/EBU = 110 Ω / PRO SPDIF = 75 ? ...
-
Mackie 800R - page 8
8 ONYX 800R ONYX 800R SIDE MID OPTICAL OUT 88.2/ 96kHz 176.4/ 192kH z 44.1/48kHz 1-8 1-8 1-4 5-8 1-2 3-4 ANALOG MICROPHONE PREAMP WITH 192kHz DIGITAL OUTPUT BALANCED LINE LEVEL INPUT BALANCED LINE LEVEL OUTPUT AES/EBU OR S/PDIF OUT AES/EBU = 110 Ω / PRO SPDIF = 75 Ω / CONSUMER ~ 100-240 VAC 50-60Hz 105W 87654321 110 Ω 75 Ω NORMAL MID/SIDE P ...
-
Mackie 800R - page 9
9 Owner’ s Manual Owner ’ s Manual Onyx 800R Liv e Mixing SIDE MID OPTICAL OUT 88.2/ 96kHz 176.4/ 192kH z 44.1/48kHz 1-8 1-8 1-4 5-8 1-2 3-4 ANALOG MICROPHONE PREAMP WITH 192kHz DIGITAL OUTPUT BALANCED LINE LEVEL INPUT BALANCED LINE LEVEL OUTPUT AES/EBU OR S/PDIF OUT AES/EBU = 110 Ω / PRO SPDIF = 75 Ω / CONSUMER ~ 100-240 VAC 50-60Hz 105W 8 ...
-
Mackie 800R - page 10
10 ONYX 800R ONYX 800R Onyx 8 0 0R Features Front Panel There ar e eight channels in the Onyx 800R. They all share the same featur es with the exceptions that channels 1 and 2 have an impedance select switch and a mid/side decode switch, and channels 7 and 8 have a high-impedance 1/4" input jack for connecting electric instruments directly to ...
-
Mackie 800R - page 11
11 Owner’ s Manual Owner ’ s Manual 6. 48V Phantom P ow er Switch Most professional condenser microphones requir e phantom power , which is a low-curr ent DC voltage delivered to the microphone on pins 2 and 3 of the XLR microphone connector . Push in the 48V button if your microphone needs phantom power . An LED lights next to the button to in ...
-
Mackie 800R - page 12
12 ONYX 800R ONYX 800R Rear Panel The rear panel is wher e you make all your analog and digital audio connections to the Onyx 800R (except for the high-impedance instrument jacks on the front). 14. MIC Inputs These are female XLR connectors, which accept a balanced microphone input from almost any type of microphone. The microphone preamps featur e ...
-
Mackie 800R - page 13
13 Owner’ s Manual Owner’ s Manual SIDE MID OPTICAL OUT 88.2/ 96kHz 176.4/ 192 kHz 44.1/48kHz 1-8 1-8 1-4 5-8 1-2 3-4 ANALOG MICROPHONE PREAMP WITH 192kHz DIGITAL OUTPUT BALANCED LINE LEVEL INPUT BALANCED LINE LEVEL OUTPUT AES/EBU OR S/PDIF OUT AES/EBU = 110 Ω / PRO SPDIF = 75 Ω / CONSUMER ~ 100-240 VAC 50-60Hz 105W 87654321 110 Ω 75 Ω ...
-
Mackie 800R - page 14
14 ONYX 800R ONYX 800R SIDE MID OPTICAL OUT 88.2/ 96kHz 176.4/ 192 kHz 44.1/48kHz 1-8 1-8 1-4 5-8 1-2 3-4 ANALOG MICROPHONE PREAMP WITH 192kHz DIGITAL OUTPUT BALANCED LINE LEVEL INPUT BALANCED LINE LEVEL OUTPUT AES/EBU OR S/PDIF OUT AES/EBU = 110 Ω / PRO SPDIF = 75 Ω / CONSUMER ~ 100-240 VAC 50-60Hz 105W 87654321 110 Ω 75 Ω NORMAL MID/SIDE ...
-
Mackie 800R - page 15
15 Owner’ s Manual Owner ’ s Manual 24. DUAL WIRE /SINGLE WIRE Swit ch The original AES/EBU speci fi cation (IEC958 T ype 1) provides for carrying two channels of digital audio at resolutions up to 24-bit at 48 kHz. When higher sam- pling rates became possible, two methods were devel- oped to transmit the digital audio at the higher sample rat ...
-
Mackie 800R - page 16
16 ONYX 800R ONYX 800R Appendix A: Ser vice Information Bad Output • If it ’ s the BALANCED LINE LEVEL OUTPUT [17], make sure the DB25 connector is corr ectly wir ed (see Appendix B: Connections). • If it ’ s the OPTICAL OUT [18], make sur e the optical cable isn ’ t kinked or damaged, and that the connec- tors are secur ely seated at bot ...
-
Mackie 800R - page 17
17 Owner’ s Manual Owner ’ s Manual Repair Service for Mackie products is available at our galactic headquarters, located in sunny W oodinville, W ashington. Service for Mackie products living outside the United States can be obtained through local dealers or distribu- tors. If your Onyx 800R needs service, follow these instructions: 1. Review ...
-
Mackie 800R - page 18
18 ONYX 800R ONYX 800R Appendix B: Connections 1/4 " TS Phone Plugs and Jacks “ TS ” stands for Tip-Sleeve, the two connection points available on a mono 1/4" phone jack or plug. They are used for unbalanced signals like the high-impedance instrument inputs on the Onyx 800R. SLEEVE TIP TIP SLEEVE TIP SLEEVE 1/4" TS Unbalanced Wir ...
-
Mackie 800R - page 19
19 Owner’ s Manual Owner ’ s Manual • When connecting an unbalanced output to a bal- anced input, be sure that the signal high (hot) connections are wir ed to each other . The unbal- anced ground (earth) connection should be wired to the low (cold) and the ground (earth) connec- tions of the balanced input. If there ar e ground-loop problems, ...
-
Mackie 800R - page 20
20 ONYX 800R ONYX 800R Maximum Input Levels Mic Input: +22 dBu, Gain @ unity Inst Input: +21 dBu, Gain @ –20 dB Line Input: > +22 dBu, Gain @ –20 dB Input Impedance Ch 1 and 2 Mic Input: 300 Ω , 500 Ω , 1.3 k Ω , or 2.4 k Ω balanced Ch 3 through 8 Mic Input: 2.4 k Ω balanced Inst Input: 1 M Ω Line: 20 k Ω balanced, 10 k Ω unb ...
-
Mackie 800R - page 21
21 Owner’ s Manual Owner ’ s Manual AC P ower Requir ements Power Consumption: 45 watts Universal AC Power Supply: 100 V AC – 240 V AC, 50-60 Hz Physical Dimensions and W eight Height: 1.75 in/44 mm W idth: 17.75 in/451 mm (main body of unit) 19.00 in/483 mm (with rack ears) Depth: 14.38 in/365 mm (including front knobs and rear BNC jack) W e ...
-
Mackie 800R - page 22
22 ONYX 800R ONYX 800R Onyx 8 0 0 R Block Diagram Line Inputs to A/D + – Line Out to A/D + – Line Out Low Cut Phase to A/D + – Line Out to A/D + – Line Out Line Outputs M/S Matrix Ch 1/Left Ch 2/Right Word Cloc k Input AD A T Optical Out 2 1 S/PDIF AES/EBU Out FPGA Sample Rate 24-bit Lock Impedance 75 Ω /110 Ω 75Hz 88.2 kHz 48 kHz 44.1 ...
-
Mackie 800R - page 23
23 Owner’ s Manual Owner ’ s Manual Onyx 800R Limited W arranty A. LOUD T echnologies Inc. warrants all materials, workmanship and proper operation of this product for a period of three years from the original date of purchase. If any defects are found in the materials or workmanship or if the product fails to function properly during the appli ...
-
Mackie 800R - page 24
16220 W ood-Red Road NE • W oodinville, W A 98072 • USA United States and Canada: 800.898.3211 Europe, Asia, Central and South America: 425.487 .4333 Middle East and Africa: 31.20.654.4000 F ax: 425.487 .4337 • www .mackie.com E -mail: sales@mackie.com ...
У вас вопрос, касающийся Mackie 800R?
Воспользуйтесь формуляром, находящимся ниже
Если с помощью найденной инструкции Вы не решили свою проблему с Mackie 800R, задайте вопрос, заполнив следующий формуляр. Если у какого то из пользователей была похожая проблема с Mackie 800R со всей вероятностью он захочет поделиться методом ее решения.