-
Star Micronics SM-T300-DB50 - page 1
Mobile Printer SM-T300 SERIES Models: SM-T300 SM-T301 SM-T302 Hardware Manual ...
-
Star Micronics SM-T300-DB50 - page 2
Federal Communications Commission Radio Frequency Interference Statement Thi s dev ice comp lie s wit h Part 15 of th e FCC Ru les . Ope rat ion is subj ect to the follo win g two cond iti ons : (1) Thi s devi ce ma y not caus e harmfu l interfe renc e, and (2) this devic e must accep t any interfe renc e receive d, inclu ding inte rfer ence that m ...
-
Star Micronics SM-T300-DB50 - page 3
Please follow the precautions below to enjoy and maintain the full performance of the printer . ■ Using the Printer ● Some semiconductor devices are easily damaged by static electricity . Y ou should turn the printer “OFF”, before you connect or removed the cable on the rear side, in order to guard the printer against the static electricity ...
-
Star Micronics SM-T300-DB50 - page 4
Choosing a place f or the printer Before actually unpacking the printer , you should take a few minutes to think about where you plan to use it. Remember the follo wing points when doing this. P Choose a firm, level surf ace where the printer will not be exposed to vibration. P The p o wer ou tlet yo u p lan to con nec t to fo r p o wer sh ould be ...
-
Star Micronics SM-T300-DB50 - page 5
T able of contents 1. Introduction .................................................................................. 5 2. Setting up the printer .................................................................. 6 2.1. Printer & Accessories ................................................................................ 6 2.2. Printer Features ...
-
Star Micronics SM-T300-DB50 - page 6
- 5 - 1. Introduction This printer is the ideal solution for Mobile banking system , Retail, point of sales, Credit card T ransaction, other traveling and mobile computing etc. The general features of this printer are as follows: ● Pocket size (120 × 132.2 × 58.3 mm) ● Light weight (560 g) for true mobility ● V ery silent printing thru dire ...
-
Star Micronics SM-T300-DB50 - page 7
- 6 - 2. Setting up the printer 2.1. Printer & accessories Y our printer box should include these items. If any items are damaged or missing, please contact your dealer for assistance. Battery pack Communication cable ▼ OPTIONAL Shoulder strap Paper Printer Battery charger Belt clip Safety instruction sheet Battery holder Car charger Extra ba ...
-
Star Micronics SM-T300-DB50 - page 8
- 7 - 2.2. Printer features ■ Part Name Paper cover Platen Platen gear Power button Feed button Power lamp Error lamp LCD Open switch Mechanism ass’y COMM DC Charge connector Interface connector Battery pack Belt clip ...
-
Star Micronics SM-T300-DB50 - page 9
- 8 - 2.3. Replacing paper roll Cautions : Be sure to use paper rolls that meet the specications. Do not use paper rolls that have the paper glued to the core because the printer cannot detect the paper end correctly . 1. Make sure that the printer is not receiving data; otherwise, data may be lost. 2. Open the paper cover by pushing down the op ...
-
Star Micronics SM-T300-DB50 - page 10
- 9 - 3. Insert a new paper roll as shown. 4. T ear the excess paper off using the tear bar . ...
-
Star Micronics SM-T300-DB50 - page 11
- 10 - 2.4. Power supply 2.4.1. Specied power supply The following specication is requested for Power supply . Battery Charger : DC 8.4 V/0.8 A Avoid using power supply which its power capacity of power current is extremely high. 2.4.2. Installing the battery and the belt clip Cautions : 1) Before installing or removing the battery pack, ensu ...
-
Star Micronics SM-T300-DB50 - page 12
- 1 1 - 2.4.3. Recharging the batt er y pack For recharging the battery pack, install the battery pack in the printer . Insert the Battery Charger to the charge connector of the printer . Cautions : 1) While charging the printer , turn off the printer power . 2) Do not remove the battery during charging. 3) If the printer is not used for a long tim ...
-
Star Micronics SM-T300-DB50 - page 13
- 12 - 2.5. Memory switch settings 1. Change the Memory switch by this operation. (Refer to T able 1). POWER button : changing Printer MODE status FEED button : changing OPTION status. 2. [Example] The defaults of the printer are : Bluetooth/57600 bps/8 Data bit/No Parity/1 stop bit/Density Medium If a user wants to change the defaults with RS-232C ...
-
Star Micronics SM-T300-DB50 - page 14
- 13 - u Press FEED button one time. g Y ou will see present STOP BIT mode in the LCD. Parity Bit g Stop Bit g Press the POWER Button one time. (The stop bit has set to 2 stop bit.) 1 Stop Bit g 2 Stop Bit u Press FEED button one time. g Y ou will see present DENSITY mode in the LCD. Stop Bit g Density g Press the POWER Button one time. (The densit ...
-
Star Micronics SM-T300-DB50 - page 15
- 14 - Printer Mode POWER Lamp (Green) ERROR Lamp (Red) Option Communication Port 1 1 RS-232C 2 Bluetooth * Baud Rate 2 1 9600 bp 2 19200 bps 3 38400 bps 4 57600 bps * 5 1 15200 bps Data Bit 3 1 7 Data bit 2 8 Data bit * Parity Bit 4 1 No Parity * 2 Odd Parity 3 Even Parity Stop Bit 5 1 1 Stop bit * 2 2 Stop bit Density 6 1 Density Low 2 Density Me ...
-
Star Micronics SM-T300-DB50 - page 16
- 15 - 3. Interface 3.1. RS-232C 1 5 2 3 4 This printer has a RS-232C interface and is connected by means of a 5 pin mini USB socket. In the following table, the signals present on the Mini- USB socket are listed: Pin No. Name Direction Function 1 TxD Output T ransmit Data 2 RxD Input Receive Data 3 CTS - - 4 NC. - - 5 GND - Ground Caution : When i ...
-
Star Micronics SM-T300-DB50 - page 17
- 16 - 3.2. Bluetooth Category Specication Bluetooth Spec. Bluetooth V2.1 / Class 2 (10 m) Frequency Range 2.4 GHz ISM BAND Data T ransmission Rate 57600 bps Fixed. Data bit 8 Data bit Fixed. Parity bit No parity Fixed. Stop bit 1 Stop bit Fixed. PIN code: 1234 as default Device Name: Star SM-T300 (without MSR model) Device Name: Star SM-T301 (1 ...
-
Star Micronics SM-T300-DB50 - page 18
- 17 - 4. Using the printer 4.1. Control panel u Button FEED Button : When the printer is on, paper can be feed manually by pressing and holding the FEED button for more than one second. POWER Button : 1 When of 5 or more seconds presses and power comes to on or off. 2 After pressing the POWER and the FEED button simultaneously , if the ER- ROR lam ...
-
Star Micronics SM-T300-DB50 - page 19
- 18 - 4.2. The self test The self test procedure will check most of the printer functions. For self test, turn on the power while holding down the FEED Button. The Self-T est checks the following : 1) Make sure paper roll has been installed properly . 2) The Self-T est prints the current printer status, which provides the control ROM version and t ...
-
Star Micronics SM-T300-DB50 - page 20
- 19 - Cautions : 1) Do not paste the paper to the core. And the roll paper which has Near end mark printing on its near end is recommended. 2) Chemicals or oil may change the color of paper , or printed Characters may fade. 3) Change of paper color starts from approx 70 °C . Pay attention to heat, humidity and sun light. 4) Color of paper may be ...
-
Star Micronics SM-T300-DB50 - page 21
- 20 - 6. Specications Item Specications Print method Direct thermal line printing Characters per line 64 cpl (MAX) Character size Eng. : 9×24 dots, 12×24 dots, 8×16 dots Kor . : 16×24 dots (24×24 dots) Optional Characters Simplied/T raditional Chinese, Arabic, Cyrillic, Russian, T ukish, Greek, Japanese, Persian, Latin9 and Others up ...
-
Star Micronics SM-T300-DB50 - page 22
- 21 - ■ Dimensions ...
-
Star Micronics SM-T300-DB50 - page 23
SPECIAL PRODUCTS DIVISION ST AR MICRONICS CO., L TD. 53 6 Nanatsushinya, Shimizu-ku, Shizuoka, 424-0066 Japan T el: (int+81)-54-347-01 12 Fax: (int+81)-54-347-0409 Please access the following URL ht t p: // ww w.s ta r-m . jp /eng/dl/dl02.htm for the latest revision of the manual. 2010.01.30 Printed in Japan, 80878310 OVERSEAS SUBSIDIAR Y COMP ANIE ...
У вас вопрос, касающийся Star Micronics SM-T300-DB50?
Воспользуйтесь формуляром, находящимся ниже
Если с помощью найденной инструкции Вы не решили свою проблему с Star Micronics SM-T300-DB50, задайте вопрос, заполнив следующий формуляр. Если у какого то из пользователей была похожая проблема с Star Micronics SM-T300-DB50 со всей вероятностью он захочет поделиться методом ее решения.