-
Manitowoc Ice QM30 Series - page 1
QM30 Series Ice Machines Installation, Use and Care, Manual Thank you for selecting a Manitowoc Ice Machine, the dependability leader in ice making equipment and related products. With proper care and maintenance, your new Manitowoc Ice Machine will provide you with many years of reliable and economical perform ance. We reserve the right to make pr ...
-
Manitowoc Ice QM30 Series - page 2
Safety Notices When using or servicing these Ice Machines, be sure to pay close attention to the safety notices in this manual. Disregarding the notices may lead to serious injury and/or damage to the ice machine. Throughout this manual, you will see the following types of safety notices: WARNING Text in a Warning box alerts you to a potential pers ...
-
Manitowoc Ice QM30 Series - page 3
Table of Contents i Table of Contents Section 1 - General Information Model/Serial Number Location ................................................................................................... ................... 1-1 Owner Warranty Registration Card .............................................................................................. ...
-
Manitowoc Ice QM30 Series - page 4
Table of Contents ii THIS PAGE INTENTIONALLY LEFT BLANK ...
-
Manitowoc Ice QM30 Series - page 5
Section 1 General Information 1-1 Section 1 General Information Model/Serial Number Location Record the model and serial number of your ice machine in the space prov ided below. These numbers are required when requesti ng information from your Manitowoc distributor, service rep resentative, or the factory. The model and serial number are listed on ...
-
Manitowoc Ice QM30 Series - page 6
General Information Section 1 1-2 Owner Warranty Registration Card GENERAL The packet containing this manual also includes warranty information. Warrant y coverage begins the day your new ice machine is installed. Important Complete and m ail the OWNER W ARRANTY REGISTRATION CARD as soon as possible to validate the installation date. If you do not ...
-
Manitowoc Ice QM30 Series - page 7
Section 1 General Information 1-3 Residential Warranty Coverage WHAT DOES THIS LIMITED WARRANTY COVER ? Subject to the exclusions and limitations below, Manitowo c Ice, Inc. (“Ma nitowoc”) warrants to t he original consumer that any new ice machine manufact ured by Manitowoc (the “Product”) shall be free of de f ects in mate rial or workman ...
-
Manitowoc Ice QM30 Series - page 8
1-4 General Information Section 1 INTENTIONALLY LEFT BLANK ...
-
Manitowoc Ice QM30 Series - page 9
Section 2 Installation Instructions 2-1 Section 2 Installation Instructions 76.20 cm (30.00”) 56.74 cm (22.34”) 50.00 cm (19.69”) Ice Making Water/Bin Drain Ice Making Water Inlet Electrical Inlet sv1678c 15.24 cm (6.00”) Legs sv1679b sv1678b 7.24 cm (2.85”) 7.32 cm (2.88”) 15.09 cm (5.94”) 15.73 cm ( 6.19” ) 9.53 cm (3.75”) 8.51 ...
-
Manitowoc Ice QM30 Series - page 10
Installation Instructions Section 2 2-2 Location of Ice Machine The location selected for th e ice machine must meet the following criteria. If a ny of these criteria are not met, select another location. • The location must be indoors. • The location must be free of airborne and other contaminants. • The air temperature must be at least 1 0 ...
-
Manitowoc Ice QM30 Series - page 11
Section 2 Installation Instructions 2-3 Electrical Service WARNING All wiring must conform to local, state and national codes. Ice Machine Voltage Phase Air-Cooled Model Cycle Electrical Rating QM30 230/50/1 .6 KW / 2.6 Amps QM30 115/60/1 .6 KW / 5.3 Amps VOLTAGE The maximum allowable voltage variation is ± 10% of the rated voltage at ic e machine ...
-
Manitowoc Ice QM30 Series - page 12
Installation Instructions Section 2 2-4 THIS PAGE INTENTIONALLY LEFT BLANK ...
-
Manitowoc Ice QM30 Series - page 13
Section 2 Installation Instructions 2-5 Water Service/Drains WATER SUPPLY Local water conditions may require treatment of the water to inhibit scale formation, filter sediment, and remove chlorine odor and taste. Important If you are installing a Manitowoc water filter system, refer to the Installation Instructions supplied with the filter s ystem ...
-
Manitowoc Ice QM30 Series - page 14
Installation Instructions Section 2 2-6 ICE MAKING WATER INLET TUBING 0.95 cm (3/8”) MINI MUM INSIDE DIAMET ER ICE MAKING/BIN WATER DRAIN TUBING 1.59 cm (5/8”) MINI MUM INSIDE DIAMET ER Typical Water Supply and Drain Line Sizing and Connections sv1680b WATER SHUT OFF VALVES OVERFLOW TUBE DRAIN HOLE Important Over flow tube must be securely inst ...
-
Manitowoc Ice QM30 Series - page 15
Section 3 Ice Machine Operation 3-1 Section 3 Ice Machine Operation Sequence of Operation Control Board Relays Ice Making Sequence of Operation 1 Compressor 2 Hot Gas Valve Water Fill Valve 3 Water Pump Fan Motor Length of “ON” Time Start-Up 1 1. Water Purge Off On Off 2.9 Minutes (175 Seconds) 2. Refrigeration System Start-Up On On Off 5 Secon ...
-
Manitowoc Ice QM30 Series - page 16
Ice Machine Operation Section 3 3-2 Ice Thickness Adjustment QM-30 dice ice cube formati on is slightly different from our previous models. Manitow oc ice machines have a unique cube shape. It is normal to have a dimple in the ice c ube (a concave indentation in the cube). Ice cubes from the QM-30 may appear to have a slightly larger dimple than ot ...
-
Manitowoc Ice QM30 Series - page 17
4-1 Section 4 Maintenance Section 4 Maintenance Interior Cleaning and Sanitizing GENERAL You are responsible for maintaining the ic e machine in accordance with the inst ructions in this m anual. Maintenance procedures are not covered by the warranty. Clean and sanitize the ice machine every six m onths for efficient operation. If the ice machine r ...
-
Manitowoc Ice QM30 Series - page 18
Maintenance 4-2 Section 4 Step 4 Wait until water f lows over the evaporator (about three minutes) then add the proper amount of Manitowoc Ice Machine Clean er to the water trough. Model Amount of Cleaner QM30 45 ml (1.5 ounces) Step 5 Wait until the clean cycle is com plete (approximately 45 minutes) then place the toggle switch in the OFF positio ...
-
Manitowoc Ice QM30 Series - page 19
4-3 Section 4 Maintenance Parts Removal Overview WAT ER TROUGH OVERFLOW TUBE WAT ER DISTRIBUTION TUBE WATER PUMP AND BRACKET A SSEMBLY WAT ER P UMP OUTLET HOSE EVAPORATOR A SSEMBLY (REMAINS IN PLA CE) ...
-
Manitowoc Ice QM30 Series - page 20
Maintenance 4-4 Section 4 WAT ER P UMP POWER CORD OUTLET B. Remove the Overflow Tube • To remove the tube, lift it up while using a slight back and forth motion to loosen it from the drain hole. When installing the tube, be sure it is completely inserted into the drain ho le to prevent water leakage during normal operation. Removing the Overflow ...
-
Manitowoc Ice QM30 Series - page 21
4-5 Section 4 Maintenance Step 7 Mix a solution of cleaner and warm water. Depending on the amount of mineral buildup, a larger quantity of solution may be required. Use the ratio in the table below to mix enough solution to thoroughly clean all parts. Solution Type Water Mixed with Cleaner 4L. (1 gal) 500 ml (1 6 oz) cleaner Step 8 Use ½ of the c ...
-
Manitowoc Ice QM30 Series - page 22
Maintenance 4-6 Section 4 WARNING Disconnect electric power to th e ice machine at the electric switch box before proceed ing. Step 17 Repeat step 6 to remove parts for hand sanitizing. Step 18 Mix a solution of sanitiz er and warm water. Solution Type Water Mixed With Sanitizer 23 L. (6 gal) 120 ml (4 oz) sanitizer Step 19 Use 1/2 of the saniti ze ...
-
Manitowoc Ice QM30 Series - page 23
4-7 Section 4 Maintenance CLEANING THE CONDENSER WARNING Disconnect electric power to th e ice machine at the electric service switch before cleani ng the condenser. Air-Cooled Condenser A dirty condenser restrict s airflow, resulting in excessively high operating temperatures. This reduces ice production and s hortens component life. Clean the con ...
-
Manitowoc Ice QM30 Series - page 24
4-8 Maintenance Section 4 Removal from Service/Winterization GENERAL Special precautions must be taken if the ice m achine is to be removed from se rvice for an extended period of time or exposed to ambient temperatures of 0 ° C (32 ° F) or below. CAUTION If water is allowed to rem ain in the ice machine in freezing temperatures, severe damage to ...
-
Manitowoc Ice QM30 Series - page 25
Section 5 Before Calling for Service 5-1 Section 5 Before Calling for Service Checklist If a problem arises during operation of your ice machine, follow the checklis t below before calling for service. Problem Possible Cause To Correct Ice machin e does not operate. No electrical power to th e ice machine. Replace the fuse/res et the breaker/turn o ...
-
Manitowoc Ice QM30 Series - page 26
Before Calling for Service Section 5 5-2 Problem Possible Cause To Correct Ice machine produ ces shallow or in co mplete cub es, or the ice fill pa ttern on the evaporator is incomplete . Water le vel is low. Be sure the overflow t ube is fully seated to prevent water leak age. See page 4-5. Water inlet valve filt er screen is dirty. Remove the wat ...
-
Manitowoc Ice QM30 Series - page 27
...
-
Manitowoc Ice QM30 Series - page 28
MANITOWOC ICE, INC. 2110 South 26th Street P.O. Box 1720 Manitowoc, W I 54221-1720 U SA Phone: ( 920) 682-0161 Service Fax: ( 920) 683-7585 W eb Site - www.manitowocice.com © 2006 Manitowoc Ice, Inc. W e reserve the right to make product improvements at any t ime. Specifications and design are su bject to ch ange witho ut no tice. ...
У вас вопрос, касающийся Manitowoc Ice QM30 Series?
Воспользуйтесь формуляром, находящимся ниже
Если с помощью найденной инструкции Вы не решили свою проблему с Manitowoc Ice QM30 Series, задайте вопрос, заполнив следующий формуляр. Если у какого то из пользователей была похожая проблема с Manitowoc Ice QM30 Series со всей вероятностью он захочет поделиться методом ее решения.