-
Pfaff 76 - page 1
Instruction Book CPFAFFD® 76 CPFAFP) 77 ...
-
Pfaff 76 - page 2
Needle and Thread Chart Thread Needle Type of Fabric Type Size Size Point Style Bed linen 80 Fine linen Cotton 40 70 80 Muslin 70—80 Dress fabrics, such as brocade, Silk so satin ottoman, taffeta, georgette, 70 — 80 crêpe, chiffon, batiste. blouse Cotton or mercerized fabrics and poplin shirting cotton so Suitings and mantlings Silk 40 80 — ...
-
Pfaff 76 - page 3
Instructions CPFAFFI 76and77 Foreword Your new Pfaff sewing machine will enable you to master a large variety of sewing, embroidering and darning jobs easily and quickly. This instruction book has been compiled in order to familiarize you thoroughly with all the sewing jobs coming up in a home. We suggest that you try out the various sew ing techni ...
-
Pfaff 76 - page 4
Essential Parts of Your Pfaff 76 1 Face cover 2 Take-up lever 3 Thread guide 4 Top cover 5 Thread retainer stud 6 Spool pins 7 Bobbin winder 8 Balance wheel 9 Stop motion knob 9 10 Motor disengaging mechanism 11 Stitch length control 12 Reverse feed control 13 Bed cover 14 Transverse rotary hook 15 Needle plate 16 Sewing foot thumb screw 17 Light s ...
-
Pfaff 76 - page 5
Essential Parts of Your Pfaff 77 1 Face cover 2 Take-up lever 3 Thread guide 4 Top cover 5 Thread retainer stud 6 Spool pins 7 Bobbin winder 8 Balance wheel 9 Stop motion knob 10 Motor disengaging mechanism 11 Stitch length control 12 Reverse feed control 13 Free arm 14 Free arm cover (enclosing transverse rotary hook) 15 Needle plate 16 Sewing foo ...
-
Pfaff 76 - page 6
Preparing Your Machine for Sewing Push plug A into the receptacle on the back of the machine and the plug at the other end of the cord into the wall outlet. To switch on the sewlight, push the button on the face cover (see ill.). Place the foot control within easy reach of your foot and depress the pedal. The harder you press, the faster the machin ...
-
Pfaff 76 - page 7
The machines feature a lever (10) under neath the balance wheel which serves to swing the motor to Its operative position. To engage the motor, flick this lever down. After you have completed sewing, flick this lever to its top position. 5 ...
-
Pfaff 76 - page 8
To remove the bobbin case, turn the balance wheel until the needle is at the top of its stroke. On the Piaft 76, remove bed cover (13), as illustrated. Lift latch k on the bobbin case and pull out the bobbin case with the bob bin. The bobbin cannot fall out as long as you hold the case by its open latch. When you release the latch, the empty bobbin ...
-
Pfaff 76 - page 9
For bobbin winding, disengage the sewing mechanism. Hold balance wheel (8) while turning stop motion knob (9) toward you (see ill.). To engage the sewing mechanism after the bobbin has been wound, turn the stop mo tion knob away from you (as indicated by the arrow in the ill,). Pass the thread around thread retainer stud (2) in the direction indica ...
-
Pfaff 76 - page 10
Hold the lull bobbin so that the thread un winds toward you and place it in the bobbin case. Pull the thread into slot (2) and under spring (3). As you pull the thread, the bobbin should rotate clockwise (4). Leave about three inches of thread hanging from the bobbin case. 8 ...
-
Pfaff 76 - page 11
To insert the bobbin case into the machine, rotate the balance wheel until the needle is at its highest point. Lift the latch and place the bobbin case on center stud s (see ill.), making sure its slot (white arrow) points up. Release the latch and press against the bobbin case until you hear it snap into place. 9 Pfaff 76 Pfaff 77 ...
-
Pfaff 76 - page 12
To remove the workplate, swing up its sup port and unlock it by pulling out and swing ing up the lever on the back of the machine (see arrow in Fig. 2). On machines having no carrying case base, the workplate support is pressed against the baseplate of the machine. 1 2 To enlarge the sewing area of the Pfaff 77 for ordinary sewing operations, push ...
-
Pfaff 76 - page 13
Upper threading is illustrated opposite. Please note that the thread is placed be tween any two of the discs of tension (20), pulled clockwise around the tension stud and drawn toward the right with a jerk (see ill.). As you do this, hold the thread steady somewhere between the spool and the ten sion. Thread the needle from front to back. V 3 20 11 ...
-
Pfaff 76 - page 14
The sewing foot is raised and lowered by operating the presser bar lifter on the back of the machine (see ill.). A = Presser bar lifter up B = Presser bar lifter down 12 To draw up the bobbin thread, hold the needle thread and lower the sewing foot. Turn the balance wheel toward you a full turn. Pull the needle thread to draw up the bobbin thread. ...
-
Pfaff 76 - page 15
Fundamentals of Machine Operation For ordinary sewing, needle position lever (19) should be in its center position. Make sure the take-up lever is at its highest point before you begin and after you have completed a seam (2). Always rotate balance wheel (8) toward you (see arrow). As you do this, check to make sure the stop motion knob is tightened ...
-
Pfaff 76 - page 16
Begin by sewing a straight-stitch seam. To this end, push stitch width control (18) to the right as far as it will go. The stitch length is regulated by turning stitch length control (11). The number indi cating the stitch length chosen should be opposite the dot on the left-hand side of the slot. For ordinary sewing operations, set the stitch leng ...
-
Pfaff 76 - page 17
15 To sew in reverse or backtack the end of a seam, simply depress fingertip control (12). The stitch width is regulated by pushing stitch width control (18) toward the left, as may be desired. Various zigzag sewing operations are dis cussed on page 26 and the following pages. ...
-
Pfaff 76 - page 18
Balanced tensions are essential for sewing. Both tensions are correctly balanced if the needle and bobbin threads interlock in the center of the material. The bobbin thread tension is regulated by turning the small knurled screw on the bob bin case. Turn this screw right (with your thumb nail) for a tighter tension, or left for a looser ten sion. I ...
-
Pfaff 76 - page 19
The accessory box which belongs to your machine contains several sewing feet for special sewing operations. To change the sewing foot, bring the needle to its highest point and raise the foot. Turn out screw 16 until the sewing foot can be removed, tilt ing it sideways (see ill.). The new foot is attached in the reverse order. To change the needle, ...
-
Pfaff 76 - page 20
Darning To prepare your machine for darning, pro ceed as follows: Replace the ordinary sewing foot by darn ing foot No. 91-102826-91, attaching it from the rear so that spring clip c rests on needle set screw (22). Tighten sewing foot thumb screw (16). Lower the presser bar lifter. Now drop the machine feed. On the Pfaff 76, this is done by removin ...
-
Pfaff 76 - page 21
Darning sheer and soft materials is greatly facilitated by placing them in darning hoops. Draw up the bobbin thread and hold both threads lightly with your left hand while the first stitches are being made. Trim the threads and start stitching back and forth across the hole in sewing direction. Make sure the threads are anchored in the unworn area ...
-
Pfaff 76 - page 22
Zipper Insertion Attach zipper foot without quilting gauge. Stitch length: 1.5 to 2. Central needle position. 84 Baste closed zipper on the fabric, then open it. Stitch close to the left edge of the zipper for about 1 inch, guiding the right edge of the foot along the zipper teeth (1). Leave the needle in the material, raise the zipper foot and clo ...
-
Pfaff 76 - page 23
Flat Felled Seams Attach flat feller No. 93-847561-00. Stitch length: 1.5 to 2. Flat felled seams are used to durably join two pieces of fabric and are usually straight-stitched. First Seam: Lay pieces together with the right sides facing and the bottom piece protruding about 1/8 inch. Make sure the fabric enters the flat feller evenly and the bott ...
-
Pfaff 76 - page 24
Hemming Stitch length: 1.5 to 2 847 551 Fold the beginning of the fabric edge twice, making a hem about 1 /s inch wide and several inches long. Place the material under the hemmer foot and lower the same. Make 3 to 4 straight stitches to secure the folded edge in place. Draw the fabric into the hemmer by pulling both threads backwards, as shown in ...
-
Pfaff 76 - page 25
Cording Use ordinary sewing foot No. 93-838 954-00, and insert a twin needle (which can be ob tained from your Pfaff dealer). Stitch length: 1.5 to 2. Cording is made with two needle threads. When threading the needles, make sure to lead each thread between a separate pair of tension discs (see ill.). To render your cording more prominent, in sert ...
-
Pfaff 76 - page 26
Use a thread which is not too heavy and matches the material being hemstitched (preferably a No. 50 embroidery thread). Insert a System 130 Twin hemstitch needle. Make sure the needle and bobbin threads are the same size. The threading procedure is the same as for cording work. Slightly in crease the needle thread tension. The hemstitching effect i ...
-
Pfaff 76 - page 27
The stitch length is regulated by turning stitch length control (11) (see ill.). The larger the number, the longer the stitch. The Zigzag Seam The stitch width is regulated by pushing stitch width control (18) toward the left, as may be desired. Never change the stitch width setting unless the needle is outside the fabric. 18 25 ...
-
Pfaff 76 - page 28
Overcasting Edges with Zigzag Stitches Attach ordinary sewing foot. Stitch length: 2. 838 954 u To overcast the edges of light and medium- weight fabrics, set the machine for its maxi mum stitch width. Soft and flimsy fabrics are best overcast with a zigzag stitch of medium width. Make sure the needle takes one stitch into the fabric and the other ...
-
Pfaff 76 - page 29
Inserting Patches Set the stitch length control on “1” and the stitch width control in the middle of its slot and stitch along the edge of the patch. Set the stitch length control on “O5” and the stitch width control at the extreme left of its slot and sew over first seam. At the corners, stop the machine with the needle down in the materia ...
-
Pfaff 76 - page 30
Inserting Lace Stitch length: 1 838 954 u Place the lace on the material and stitch it down with straight stitches on both sides (1). Cut the fabric open under the lace insertion (2) and iron it on both sides of the lace. Sew over the edges of the lace with short zigzag stitches of medium width (3). Trim the fabric edges away on the wrong side (4). ...
-
Pfaff 76 - page 31
4- () 3r C’D Changing the Needle Position Some special sewing jobs are made with the needle switched to the right or left of the needle plate slot. This is done by moving lever (19) to the right and left, respectively. The needle position lever is indispensable for sewing buttonholes. Lever at left center right C) 29 ...
-
Pfaff 76 - page 32
Sewing Buttonholes Attach buttonhole foot No. 847616 to the machine and set the slide on the buttonhole gauge to the buttonhole length desired. The number indicating the buttonhole length should be in line with the right edge of the slide. The buttonhole is the right length when the beginning of the first seam reaches the red end of the slide indic ...
-
Pfaff 76 - page 33
Sew the first seam over the filler cord. When the buttonhole is the right length, leave the needle in the fabric on the right of its throw. Lift the sewing foot, turn the fabric around clockwise by half a turn, place the filler cord aroL.!nd the needle and pull it forward, placing it in the left groove of the foo. Lower the foot and take one stitch ...
-
Pfaff 76 - page 34
Monogram Embroidery Regulate the stitch width to suit the size of the monogram. Remove the sewing foot and drop the ma chine feed. Lower the presser bar lifter. Trace the monogram on the fabric and place the material in darning hoops. Let the needle stitch into the fabric at the beginning of the design and draw the bob bin thread up through the fab ...
-
Pfaff 76 - page 35
Fold the hem (2) and place the fabric under the sewing foot so that the folded edge is in line with the left groove of the foot (see ill.). Regulate the stitch width so that the needle takes the left stitch exactly in the folded edge, catching merely one fabric yarn (see ill.). 1=71 °° Baste the hem or pin it about /16 inch from the fabric edge, ...
-
Pfaff 76 - page 36
Ornamental Sewing You can make exciting fashion-stitch designs by varying stitch length, stitch width and needle position. Some of the designs you can make are illustrated on this page. Additional ornamental efFects are obtained by sewing over a filler cord. Sewing Curtains Stitch length: 2.5to3 Stitch width: medium — 838 954 93-OU’7 Use a thin ...
-
Pfaff 76 - page 37
To make appliqué, proceed as follows: 1. Trace the design on the right side. 2. Set the stitch length control on “1’ and stitch along the outlines. 3. Sew the fabric to be appliquéd to the right side with long stitches (1). 4. Follow the outlines of the design on the wrong side with a narrow zigzag stitch (stitch length control on “1’), a ...
-
Pfaff 76 - page 38
To change the light bulb, remove the face cover by pulling it in the direction indicated by the arrow. Push the light bulb into its socket, turn left and pull out. Insert the new bulb so that its pins slide into the socket slots. Press the bulb in and turn right. As you replace the face cover, slip tip d into slot c, then push against the face cove ...
-
Pfaff 76 - page 39
Machine Care Longevity and smooth machine performance are dependent on regular cleaning and prop er oiling. Since your Pfaff sewing machine has been made from high-grade materials, there are only a few oiling points left. The raceway in the sewing hook is the most important oiling point. From time to time, put a drop of oil into the hook raceway (s ...
-
Pfaff 76 - page 40
r • From time to time, clean the parts in the machine arm and in the vicinity of the sew- • ing hook with a soft brush. To this end, remove the needle, the sewing foot and the bobbin case with the bobbin. On Plaff 77 machines, loosen the set screw, lift the front of the free arm cover and pull the cover out lengthwise of the arm (1 &2). Pfa ...
-
Pfaff 76 - page 41
Trouble Shooting When operated properly, your sewing ma chine will hardly develop any trouble. Please remember to restore the normal set ting after you have completed your sewing job (buttonhole sewing or darning, for in stance) by switching the machine back to straight stitching, flicking the needle posi tion lever to its central position, raising ...
-
Pfaff 76 - page 42
Page Appliqué Work 35 Blindstitching 33 Buttonholes 30 Button Sewing 32 Changing the Light Bulb 36 Changing the Needle 17 Changing the Needle Position 29 Changing the Sewing Foot 17 Cleaning 37 Cording 23 Darning 18 Darning Foot 18 Drawing Up the Bobbin Thread . . 12 Dropping the Machine Feed . . . 18 Electrical Equipment 4 Engaging and Disengagin ...
-
Pfaff 76 - page 43
CPFAFFD® No. 20886 engl. (US.) HR 469 Printed in Germany * . *. ...
У вас вопрос, касающийся Pfaff 76?
Воспользуйтесь формуляром, находящимся ниже
Если с помощью найденной инструкции Вы не решили свою проблему с Pfaff 76, задайте вопрос, заполнив следующий формуляр. Если у какого то из пользователей была похожая проблема с Pfaff 76 со всей вероятностью он захочет поделиться методом ее решения.