-
Weslo WLTL25320 - page 1
Model No. WL TL25320 Serial No. Write the serial number in the space above for future reference. CAUTION Read all precautions and instruc- tions in this manual before using this equipment. Save this manual for future reference. USER'S MANUAL Serial Number Decal Visit our website at www .weslo.com new products, prizes, fitness tips, and much mo ...
-
Weslo WLTL25320 - page 2
2 T ABLE OF CONTENTS IMPORT ANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 ASSEMBL Y . . . . . . . . . . ...
-
Weslo WLTL25320 - page 3
16. The treadmill is capable of high speeds. Adjust the speed in small increments to avoid sudden jumps in speed. 17 . Never leave the treadmill unattended while it is running. Always remove the key and unplug the power cord when the treadmill is not in use. 18. Do not attempt to raise, lower , or move the treadmill until it is properly assembled. ...
-
Weslo WLTL25320 - page 4
4 BEFORE YOU BEGIN Handrails Console Storage Latch Key/Clip Circuit Breaker W alking Belt Foot Rails Incline Leg Incline Pin Power Cord FRONT BACK RIGHT SIDE Rear Roller Adjustment Bolts W ater Bottle Holder (Bottle not included) Accessory T ray Uprights Thank you for selecting the WESLO ® CADENCE C32 treadmill. The CADENCE C32 treadmill combines ...
-
Weslo WLTL25320 - page 5
5 ASSEMBL Y Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials; do not dis pose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top ...
-
Weslo WLTL25320 - page 6
6 3. With the help of a second person, attach the Base (46) to the Right Upright (62) with two Upright Bolts (65), two 3/8” W ashers (66), and two 3/8” Nuts (61) as shown. Attach the Base (46) to the Left Upright (not shown) in the same way . 3 65 66 62 46 61 4. Raise the treadmill to the upright position. If there are plastic ties in the brack ...
-
Weslo WLTL25320 - page 7
10. Make sure that all parts used in assembly are properly tightened before you use the treadmill. Keep the included allen wrench in a secure place. The allen wrench is used to adjust the walking belt (see page 13). T o protect the floor or carpet, place a mat under the treadmill. 48 2 53 9 9. Attach the Storage Latch (48) to the Left Upright (53) ...
-
Weslo WLTL25320 - page 8
8 OPERA TION AND ADJUSTMENT THE PERFORMANT LUBE TM W ALKING BEL T Y our treadmill features a walking belt coated with PERFORMANT LUBE TM , a high-performance lubricant. IMPORT ANT : Never apply silicone spray or other substances to the walking belt or the walking plat- form. Such substances will deteriorate the walking belt and cause excessive wear ...
-
Weslo WLTL25320 - page 9
9 CAUTION: Before operating the console, read the following precautions. • Do not stand on the walking belt when turning on the power . • Always wear the clip (see the drawing below) while using the treadmill. When the key is removed from the console, the walking belt will stop. • Adjust the speed in small increments. • T o reduce the possi ...
-
Weslo WLTL25320 - page 10
10 Follow the steps below to operate the console. Insert the key fully into the console. Inserting the key will not turn on the displays. The displays will turn on when the ON/RESET button is pressed or when the walking belt is started. Note: If you just installed batteries, the displays will already be on. Reset the speed control and start the wal ...
-
Weslo WLTL25320 - page 11
11 HOW T O FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, unplug the power cord. CAUTION: Y ou must be able to safely lift 45 pounds (20 kg) in order to raise, lower or move the treadmill. 1. Hold the treadmill with your hands in the locations shown at the right. T o decrease the possibility of injur ...
-
Weslo WLTL25320 - page 12
12 MAINTENANCE AND TROUBLESHOOTING Most treadmill problems can be solved by following the steps below . Find the symptom that applies, and follow the steps listed. If further assistance is needed, please call our Customer Service Department toll- free at 1-800-999-3756, Monday through Friday , 6 a.m. until 6 p.m. Mountain Time (excluding holidays). ...
-
Weslo WLTL25320 - page 13
13 PROBLEM: The walking belt slows when walked on SOLUTION: a. Use only a single-outlet surge suppressor that meets all of the specifications described on page 8. b. If the walking belt is overtightened, treadmill perfor- mance may decrease and the walking belt may become damaged. Remove the key and UNPLUG THE POWER CORD . Using the allen wrench, t ...
-
Weslo WLTL25320 - page 14
14 CONDITIONING GUIDELINES The following guidelines will help you to plan your exercise program. For more detailed exercise informa- tion, obtain a reputable book or consult your physician. EXERCISE INTENSITY Whether your goal is to burn fat or to strengthen your cardiovascular system, the key to achieving the desired results is to exercise with th ...
-
Weslo WLTL25320 - page 15
T raining Zone Exercise After warming up, increase the intensity of your exer- cise until your pulse is in your training zone for 20 to 60 minutes. (During the first few weeks of your exer- cise program, do not keep your pulse in your training zone for longer than 20 minutes.) Breathe regularly and deeply as you exercise—never hold your breath. A ...
-
Weslo WLTL25320 - page 16
Part No. 186733 R0802B Printed in USA © 2002 ICON Health & Fitness, Inc. ORDERING REPLACEMENT P ARTS T o order replacement parts, call our Customer Service Department toll-free at 1-800-999-3756, Monday through Friday , 6 a.m. until 6 p.m. Mountain T ime (excluding holidays). When ordering parts, please be prepared to give the following inform ...
-
Weslo WLTL25320 - page 17
Star W asher (29)–2 3/4” T ek Screw (3)–4 Wheel Bolt (67)–2 Frame Bolt (70)–2 3/8” Nut (61)–6 Handrail Bolt (42)–4 3/4” Screw (2)–12 Upright Bolt (65)–4 1/4” W asher (38)–4 3/8” W asher (66)–8 Spacer Screw (89)–2 Remove this chart and use it to identify small parts during assembly . Save this chart and the EXPLODED D ...
-
Weslo WLTL25320 - page 18
P ART LIST—Model No. WL TL25320 R0802B 1 1 Motor Hood 2 14 3/4” Screw 3 13 3/4” T ek Screw 4 5 8” Cable T ie 5 1 Cable T ie 6 1 Clamp Screw 7 1 Cable T ie Clamp 8 1 Left Foot Rail 9 2 Front Isolator 10 2 Front Platform Screw 1 1 1 Wire Cover 12 2 Incline Leg W asher 13 1 Catch 14 2 Belt Guide 15 4 Belt Guide Screw 16 1 Reed Switch Clip 17 1 ...
-
Weslo WLTL25320 - page 19
38 42 2 44 61 5 3 7 4 91 91 91 91 22 23 24 25 32 32 32 31 26 32 35 20 19 71 76 27 17 47 16 89 10 34 3 18 33 51 30 28 36 29 3 18 39 38 27 89 84 10 3 3 79 14 73 3 77 74 72 88 15 80 82 81 38 83 86 82 81 85 49 38 86 64 88 90 13 80 14 15 8 1 21* 75 32 50 3 3 12 12 41 40 40 61 68 67 63 3 66 67 68 61 66 63 3 63 3 63 3 38 42 70 66 42 42 38 38 48 2 2 44 56 ...
У вас вопрос, касающийся Weslo WLTL25320?
Воспользуйтесь формуляром, находящимся ниже
Если с помощью найденной инструкции Вы не решили свою проблему с Weslo WLTL25320, задайте вопрос, заполнив следующий формуляр. Если у какого то из пользователей была похожая проблема с Weslo WLTL25320 со всей вероятностью он захочет поделиться методом ее решения.