-
RIDGID R1000 - page 1
Your new angle grinder has been engineered and manufactured to our high standard for dependability, ease of operation, and operator safety. When properly cared for, the angle grinder will give you years of rugged, trouble-free performance. WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using ...
-
RIDGID R1000 - page 2
2 T ABLE OF CONTENTS ■ Introduction ............................................................................................................................................................... 2 ■ General Safety Rules ............................................................................................................................. ...
-
RIDGID R1000 - page 3
3 GENERAL SAFETY RULES WARNING: Read and understand all instructions. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. SA VE THESE INSTRUCTIONS W ork Area ■ Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents. ■ Do not operate power tools in ...
-
RIDGID R1000 - page 4
4 SPECIFIC SAFETY RULES Always use proper guard with grinding wheel. A guard protects operator from broken wheel fragments. Accessories must be rated for at least the speed recommended on the tool warning label. Wheels and other accessories running over rated speed can fly apart and cause injury . Hold tool by insulated gripping surface ...
-
RIDGID R1000 - page 5
5 Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer. SYMBOL NAME DESIGNATION/EXPLANATION V Volts Voltage A Amperes Current Hz Hertz Frequency (cycles per second) W Watt Power min Minutes Time Alterna ...
-
RIDGID R1000 - page 6
6 SPECIFICA TIONS Grinding Wheel Capacity ........................................................................................................ ............. 4-1/2 in. (1 15 mm) Spindle Thread ................................................................................................................. ................. 5/8 x 1 1 UNC (M14) No ...
-
RIDGID R1000 - page 7
7 UNP ACKING Instructions Your angle grinder has been shipped completely assembled. ■ Carefully remove the tool and accessories from the box. ■ Make sure that all items listed in the packing list are included. ■ Inspect the tool carefully to make sure no breakage or damage occurred during shipping. ■ Do not discard the packing material unti ...
-
RIDGID R1000 - page 8
8 Before using the angle grinder, familiarize yourself with all operating features and safety requirements. However, do not let familiarity with the tool make you careless. WARNING: Exercise caution when using the angle grinder. Careless actions, for even a fraction of a second, can result in serious personal injury. Your new angle grinder is equip ...
-
RIDGID R1000 - page 9
9 FEA TURES Fig. 1 SPINDLE LOCK BUTTON GRINDING WHEEL SIDE HANDLE CLAMP NUT DISC FLANGE WRENCH CLAMP SCREW GUARD SWITCH ...
-
RIDGID R1000 - page 10
10 ASSEMBL Y WARNING: The angle grinder should never be connected to a power supply when you are assembling parts, making adjustments, cleaning, performing main- tenance, or when the tool is not in use. Discon- necting the tool will prevent accidental starting that could cause serious injury. Attaching the Side Handle See Figure 2. Follow these ste ...
-
RIDGID R1000 - page 11
11 ASSEMBL Y Fig. 3a Fig. 3b • To install optional flap disc (sold separately) : Place the flap disc over the spindle. Thread the clamp nut on the spindle with the flat side of the nut facing up. Fit the raised, small diameter portion of the clamp nut into the hole in the wheel and finger tighten. WARNING: Always install a grinding wheel with the ...
-
RIDGID R1000 - page 12
12 ADJUSTMENTS WARNING: The angle grinder should never be connected to a power supply when you are assembling parts, making adjustments, cleaning, performing main- tenance, or when the tool is not in use. Discon- necting the tool will prevent accidental starting that could cause serious injury. Adjusting the Guard See Figures 4, 5, and 6. The guard ...
-
RIDGID R1000 - page 13
13 OPERA TION WARNING: Always wear safety goggles or safety glasses with side shields when operating this tool. Failure to do so could result in dust, shavings, or loose particles being thrown into your eyes, resulting in possible serious injury. DANGER: Never attach a wood cutting or carving blade of any type to this angle grinder. It is only desi ...
-
RIDGID R1000 - page 14
14 OPERA TION ■ Move the grinder continuously, at a steady, consistent pace. CAUTION: If the grinder is held in one spot too long, it will gouge and cut grooves in the workpiece. If the grinder is held at too sharp an angle, it will also gouge the workpiece because of concentration of pressure on a small area. ■ Use just enough pressure to keep ...
-
RIDGID R1000 - page 15
15 MAINTENANCE WARNING: When servicing use only identical Ridgid replace- ment parts. Use of any other parts may create a hazard or cause product damage. WARNING: The angle grinder should never be connected to a power supply when you are assembling parts, making adjustments, cleaning, performing main- tenance, or when the tool is not in use. Discon ...
-
RIDGID R1000 - page 16
16 NOTES ...
-
RIDGID R1000 - page 17
17 NOTES ...
-
RIDGID R1000 - page 18
NOTES 18 ...
-
RIDGID R1000 - page 19
19 This product is manufactured under license from Ridgid, Inc. by One World Technologies, Inc. All warranty communications should be directed to One World Technologies, Inc. at (toll-free) 1-866-539-1710. 90-DAY SATISFACTION GUARANTEE POLICY During the first 90 days after the date of purchase, if you are dissatisfied with the performance of this R ...
-
RIDGID R1000 - page 20
OPERA T OR'S MANUAL Angle Grinder R1000 V ariable Speed Customer Service Information For parts or service, contact your nearest Ridgid authorized service center. Be sure to provide all relevant information when you call or visit. For the location of the authorized service center nearest you, please call 1-866-539-1710 or visit us online at www ...
У вас вопрос, касающийся RIDGID R1000?
Воспользуйтесь формуляром, находящимся ниже
Если с помощью найденной инструкции Вы не решили свою проблему с RIDGID R1000, задайте вопрос, заполнив следующий формуляр. Если у какого то из пользователей была похожая проблема с RIDGID R1000 со всей вероятностью он захочет поделиться методом ее решения.