-
John Lewis JLTDC12 - page 1
JLTDC12 Condenser dryer with heat pump Instruction manual ...
-
John Lewis JLTDC12 - page 2
Important safety information It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can get to k n ...
-
John Lewis JLTDC12 - page 3
cause an explosion. Only tumble dry items washed with water. • Risk of fire: items that have been spotted or soaked with ve getable or cooking oil constitute a fire hazard and should not be placed in the tumble dryer. • If you have wa shed your laundry wi th stain remo ver you must execute an extra rinse cycle before loading your tumble dryer. ...
-
John Lewis JLTDC12 - page 4
fluids are used, care should be taken to ensure that the fluid is remove d from the garment before placing in the machine. • Never pull the power supply cable to remove the plug from the socket; a lways take hold of the plug itself. • Never use the tumble dryer if the power supply cable, the control panel, the working surface or the base are da ...
-
John Lewis JLTDC12 - page 5
Warning! When a unit is no longer being used: • Pull the plug out of the socket. • Cut off the cable and plug and dispose of them. • Dispose of the door catch. This prevents children from trapping themselves inside and endangering their lives. The symbol on the product or on its packaging indicates that this product may not be treated as hous ...
-
John Lewis JLTDC12 - page 6
Contents For the user Important safety information 2 Description of the appliance 8 Control panel 9 Before first use 9 Programme chart 10 Sorting and preparing laundry 11 Daily use 12 Switching machine on 12 Door opening and laundry loading 12 Selecting the programme 12 Extra delicate 12 Intensive 13 Anti-crease 13 Alarm 13 Time 13 Delay start 14 S ...
-
John Lewis JLTDC12 - page 7
Machine settings 22 Environmental information 7 ...
-
John Lewis JLTDC12 - page 8
Description of the appliance 1 4 6 8 11 12 2 3 5 7 9 10 1 Control panel 2 Water reservoir 3 Drum light 4 Fine fluff filter 5 Fluff filter 6 Loading door (reversible) 7 Rating plate 8 Course fluff filter 9 Heat exchanger cover 10 Push button for base door opening 11 Ventilation grille 12 Adjustable feet 8 ...
-
John Lewis JLTDC12 - page 9
Control panel 1 234 5 6 7 8 9 1 0 1 Programme selector and Off switch 2 Extra delicate button 3 Intensive button 4 Anti-crease button 5 Alarm button 6 Time button 7 Display ( Dry time ) 8 Start/Pause button 9 Warning lights: Condenser , Filter , Full tank 10 Delay start button Before first use In order to remove any residues which may have been pro ...
-
John Lewis JLTDC12 - page 10
Programme chart Programmes max. load (weight when dry) Additional functions/options Application/properties Extra delicate Intensive Anti-crease Alarm Time Delay sta rt Cottons Extra dry 7 kg - • • • - • To dry thick or multi- layered fa brics, e.g. terry towelling items, bathrobes, cottons. Cottons Store dry 7 k g - ••• - • To dry t ...
-
John Lewis JLTDC12 - page 11
Programmes max. lo ad (weight when dry) Additional functions/options Application/properties Extra delicate Intensive Anti-crease Alarm Time Delay start Wool care 1 kg - - - • - • To refresh the clothes made of wool . The cloths become soft and cosy. We recommend to remove the cloths immediately after the programme end. Refresh 1 kg - - • • ...
-
John Lewis JLTDC12 - page 12
Daily use Switching machine o n Turn the p rogramme selector to a ny programme. The ma chine switches on. When the loading doo r is open, the internal lamp illuminates the drum. Door opening and laundry loading 1. Open loading door: Push against the loading door (push point) 2. Load your laundry (do not force it in). Caution! Do not jam laundry in ...
-
John Lewis JLTDC12 - page 13
To deselect the function press the Extra delicate button again. LED above is off. Intensive If the laundry is still damp after a standard drying programme, you can increase the drying result by using the Intensive function. 1. Choose the drying programme. 2. Press the Intensive button - the LED above is on. To deselect the function press the Intens ...
-
John Lewis JLTDC12 - page 14
1. Turn the programme selector to the Time programme. The flashing 10' above the Time button is on. 2. Press the Time button repeatedly until the desired progr amme duration is shown in the display, e.g. 20 for a program me of 20 m inut es. If the progra mme duration is not selected, the duration is automatically set to 10 mins. Delay start Wi ...
-
John Lewis JLTDC12 - page 15
Starting the programme Press the Start/Pause button. T he programme starts. The programme progress is shown by elapsing Dry time on LCD. Changing programme To change a progr amme which has been selected by mistake once the programme has started, first turn the pro gramme selector to Off and then reset the programme. The programme can no long er be ...
-
John Lewis JLTDC12 - page 16
The drying cycles are automaticall y followed by an anti-crease phase which lasts around 30 minutes. The drum rotates at intervals during this phase. This keeps the laundry loose and free of cre ases. The lau ndry can be removed at any time during the anti-crease phase. (The laundry should be taken out towards the end of the anti-crease phase at th ...
-
John Lewis JLTDC12 - page 17
4. Push down the unlock butto n on the large mesh filter. The larg e mesh filt er pops up. 5. Take out fine filter. 6. Remove the fluff from fine filter. It is best to use a damp hand for this purpose. Clean the entire filter area The filter area does not h ave to be cleaned after every drying cycle, but should be checked regularly and cleaned of f ...
-
John Lewis JLTDC12 - page 18
If the fine filter is not fitted, the large mesh filter will no t snap into place and the loading door cannot be closed. Cleaning the door seal Wipe the door seal with a damp cloth immediately after the drying cycle has finished. Emptying the water reservoir Empty the water reservoir after eve ry drying cycle. If the water reservoir is full, an act ...
-
John Lewis JLTDC12 - page 19
Cleaning heat exchanger filters If the warning lamp Condenser lights, the heat exchanger fluff filters in the base of the appliance must be cleaned, i.e. after each 3 drying cycles. Both filters are located in the appliance base. Water can collect in the filter housing therefore it is normal for the heat exchanger fluff filters to become wet. Impor ...
-
John Lewis JLTDC12 - page 20
4. Use a damp hand to remove the fluff from the filter in the base . If necessary pull out and clean the filter with warm water using a wiper or brush. Clean the inside of the door, the f luff filter chamber and the rubber seals of fluff. Insert the fluff filter to the base. 5. Insert the fluff filter into the filter housing (it has to audibly lock ...
-
John Lewis JLTDC12 - page 21
Clean operating screen and housing Caution! Do not use fur nitur e cleaners or aggressive cl eaning agents to clean the machine. Use a damp cloth to wipe down the operating screen and housing. What to do if ... Problem 1) Possible cause Remedy Dryer does not work. Dryer not connected to mains supply. Plug in at mains socket. Check fuse i n fuse box ...
-
John Lewis JLTDC12 - page 22
Drying cycl e to short Small laundry volume./Too dry laun dry for selected programme. Select time programme or higher drying level (e.g. Extra dry ). Drying cycl e to long 5) Fluff filters clogged. Clean fl uff filters. To high loading volume. Respect max. loading volume. Laundry insufficiently spun. Spun adequately the laun dry. Particularly high ...
-
John Lewis JLTDC12 - page 23
2. Press simultaneously th e Intensive and Anti-crease buttons and hold down for approx. 5 seconds. Adjusting the level of conductivity Water contains, a variable quantity of limestone and mineral salts of which quantities vary according to geographical locations thus varying its conductivity values. Relevant va riations of the conductivity of the ...
-
John Lewis JLTDC12 - page 24
Technical specifications Height x width x depth 85 x 60 x 58 cm Drum volume 108 l Depth with loading door open 109 cm Height can be adjusted by 1.5 cm Weight when empty approx. 52 kg Loading volume (depends on programme) 1) max. 7 kg Voltage 230-240 V Required fuse 13 A Total power 1050 W Energy effici ency cla ss A Energy consumption (7 kg of cott ...
-
John Lewis JLTDC12 - page 25
Installation Transporting the appliance Important! Only tip the appliance on its left side to transport (see illustration), if it cannot be transported in an upright positi on. Appliance positioning • It is recommended that, for your convenience, the machine is positioned close to your washing machine . • The tumble dryer must be installed in a ...
-
John Lewis JLTDC12 - page 26
Important! • The appliance shoul d not be installed in an environment such as a unheated g arage or outbuilding. Th e combination of high humidity and low ambient temperatures could affect the performance or the applianc e and theref ore inval idate y our guarantee. • The hot air emitted by the tumble dryer can reach temperatu res of up to 60° ...
-
John Lewis JLTDC12 - page 27
Warning! THIS APPLIANCE MUST BE EARTHED. Should the applian ce power supply cable nee d to be replaced, this must be carried out by a Service Force agent (see cha pter: Repa irs - after sales service). The manufacturer dec lines any liabilit y should th is safe ty measure not be observed. Before switching on, make sure the electricity supply voltag ...
-
John Lewis JLTDC12 - page 28
Warning! The manufacturer declines any responsibility for damage or injury through failure to comply with the above safety precautions. Should the appliance power supply cable need to be replaced, this must be carried out by our Service Centre. Warning! The power supply cable must be accessib le after installing the machine. Permanent connection In ...
-
John Lewis JLTDC12 - page 29
IMPORTANT : If you call out an engineer to a faul t listed below, or to repair a fault caused by incorrect use or installation, a charge will be made even if the appl iance is under guarantee. Spare parts Always insist on genuine spare parts. An authorised service enginee r should service this product, and only genuine spare parts should be used. U ...
-
John Lewis JLTDC12 - page 30
30 ...
-
John Lewis JLTDC12 - page 31
31 ...
-
John Lewis JLTDC12 - page 32
John Lewis Partne rship 171 Victoria Street London SW1E 5NN www. johnlewis.com 136912010-00-052010 ...
У вас вопрос, касающийся John Lewis JLTDC12?
Воспользуйтесь формуляром, находящимся ниже
Если с помощью найденной инструкции Вы не решили свою проблему с John Lewis JLTDC12, задайте вопрос, заполнив следующий формуляр. Если у какого то из пользователей была похожая проблема с John Lewis JLTDC12 со всей вероятностью он захочет поделиться методом ее решения.