-
Philips SNA6640 - page 1
SNA6640 User Manual 1 EN ...
-
Philips SNA6640 - page 2
☎ Helpline België/Belgique/Belgien 070 253 010 ( . 0.17) Luxemburg/Luxembourg 26 84 30 00 Danmark 3525 8761 Deutschland 0180 5 007 532 ( . 0.12) España 902 888 785 ( . 0.15) France 08 9165 0006 ( . 0.23) Eda 0 0800 3122 1223 Ireland 01 601 1161 Italia 199 404 042 ( . 0.25) Cyprus 800 92256 Nederland 0900 0400 063 ( . 0.20) Norge 2270 8 ...
-
Philips SNA6640 - page 3
L1 L2 L3 L4 ADSL 12V—1A POWER ADSL ONLINE WIRELESS RESET LAN4 LAN3 LAN2 LAN1 3 1 ADSL Port ADSL port (RJ-11). Connect your ADSL line to this port. 2 Power Inlet Connect the included power adapter to this inlet. Warning: Using the wrong type of power adapter may damage the ADSL Wireless Modem Router. 3 Reset Button Use this button to reset the pow ...
-
Philips SNA6640 - page 4
5 Introduction 5 About the ADSL Wireless Modem Router 5 Features and Benefits 7 Installation 7 System Requirements 7 Hardware Description 7 LED Indicators 7 ISP Settings 8 Connect the System 8 Connect the ADSL Line 8 Phone Line Configuration 8 Connect the Power Adapter 9 Configuring Client PC 9 TCP/IP Configuration 9 Windows 98/Me 10 Obtain IP Sett ...
-
Philips SNA6640 - page 5
EN 5 SNA6640 Congratulations on your purchase of the Philips ADSL Wireless Modem Router, hereafter referred to as the ‘ADSL Wireless Modem Router’. We are proud to provide you with a powerful yet simple communication device for connecting your local area network (LAN) to the Internet. For those who want to surf the Internet in the most secure w ...
-
Philips SNA6640 - page 6
EN 6 Security The ADSL Wireless Modem Router supports security features that deny Internet access to specified users, or filter all requests for specific services that the administrator does not want to serve. The ADSL Wireless Modem Router's firewall also blocks common hacker attacks, including IP Spoofing, Land Attack, Ping of Death, IP with ...
-
Philips SNA6640 - page 7
EN ADSL 12V—1A RESET LAN4 LAN3 LAN2 LAN1 7 System Requirements • ADSL line installed by your Internet Service Provider. • A computer using a fixed IP address or dynamic IP address assigned via DHCP, as well as a gateway server address and DNS server address from your service provider. • A computer equipped with a 10/100 Mbps network adapter ...
-
Philips SNA6640 - page 8
EN 8 Connect the System The ADSL Wireless Modem Router can be positioned at any convenient location in your office or home. No special wiring or cooling requirements are needed. You should, however, comply with the following guidelines: • Keep the ADSL Wireless Modem Router away from any heating devices. • Do not place the ADSL Wireless Modem R ...
-
Philips SNA6640 - page 9
EN 9 After completing hardware setup by connecting all your network devices, you need to configure your computer to connect to the ADSL Wireless Modem Router. See: ‘Windows 98/Me’ on page 9 ‘Windows NT 4.0’ on page 12 ‘Windows 2000’ on page 14 ‘Windows XP’ on page 14 ‘Wireless adapters’ on page 17 TCP/IP Configuration To access ...
-
Philips SNA6640 - page 10
EN 10 3 In the Network window, under the Configuration tab, double-click the TCP/IP item listed for your network card. 4 In the TCP/IP window, select the IP Address tab. If ‘Obtain an IP address automatically’ is already selected, your computer is already configured for DHCP. If not, select this option. 5 Windows may need your Windows 98/ME CD ...
-
Philips SNA6640 - page 11
EN 11 3 In the IP Configuration window, select your network card from the drop-down menu. Click Release and then click Renew. Verify that your IP address is now 192.168.1.xxx, your Subnet Mask is 255.255.255.0 and your Default Gateway is 192.168.1.1. These values confirm that your ADSL Wireless Modem Router is functioning. Click OK to close the IP ...
-
Philips SNA6640 - page 12
EN 12 6 If ‘Obtain an IP address automatically’ is already selected, your computer is already configured for DHCP. If not, select this option and click ‘Apply.’ 7 Click the DNS tab to see the primary and secondary DNS servers. Record these values, and then click ‘Remove.’ Click ‘Apply’, and then ‘OK.’ 8 Windows may copy some fil ...
-
Philips SNA6640 - page 13
EN 13 4 Type ‘EXIT’ and press the ENTER key to close the Command Prompt window. Your computer is now configured to connect to the ADSL Wireless Modem Router. Windows 2000 1 On the Windows desktop, click Start/Settings/Network and Dial-Up Connections. 2 Click the icon that corresponds to the connection to your ADSL Wireless Modem Router. 3 The c ...
-
Philips SNA6640 - page 14
EN 14 1 On the Windows desktop, click Start/Programs/Accessories/Command Prompt. 2 In the Command Prompt window, type ‘IPCONFIG/RELEASE’ and press the ENTER key. 3 Type ‘IPCONFIG /RENEW’ and press the ENTER key. Verify that your IP Address is now 192.168.1.xxx, your Subnet Mask is 255.255.255.0 and your Default Gateway is 192.168.1.1. These ...
-
Philips SNA6640 - page 15
EN 15 3 Type ‘IPCONFIG /RENEW’ and press the ENTER key. Verify that your IP Address is now 192.168.1.xxx, your Subnet Mask is 255.255.255.0 and your Default Gateway is 192.168.1.1. These values confirm that your ADSL Wireless Modem Router is functioning. Type ‘EXIT’ and press the ENTER key to close the Command Prompt window. Your computer i ...
-
Philips SNA6640 - page 16
EN 16 Disable HTTP Proxy You need to verify that the ‘HTTP Proxy’ feature of your web browser is disabled. This is so that your browser can view the ADSL Wireless Modem Router's HTML configuration pages. The following steps are for Internet Explorer. Internet Explorer 1 Open Internet Explorer and click the Stop button. Click Explorer/Prefe ...
-
Philips SNA6640 - page 17
EN 17 4 Clear all the check boxes. 5 Click OK, and then click OK again to close the Internet Options window. 6 Browse to the ADSL Wireless Modem Router by entering http://192.168.1.1 in the URL address. ...
-
Philips SNA6640 - page 18
EN 18 Setting up the ADSL Wireless Modem Router Setup Wizard Getting Started Make sure that you have a working ADSL subscription and that the ADSL Wireless Modem Router is connected to the ADSL phone line. You can verify that the cable is connected correctly by looking at the light on the front of the ADSL Wireless Modem Router. The 'ASDL&apos ...
-
Philips SNA6640 - page 19
EN 19 Connection Status Step 5 shows if you have internet connection or not. If you have connection you will see the following message. If the connection failed you will see the following message. Please check that your ADSL line is active and that you've entered the correct ISP settings. ...
-
Philips SNA6640 - page 20
EN 20 Configuring the ADSL Wireless Modem Router ADSL / Internet settings ADSL Status Click on ‘ADSL Status’ which is located on the left side of the screen. The left-hand side displays the main menu and the right-hand side shows descriptive information. ISP settings Enter the ATM (Asynchronous Transfer Mode) virtual connection parameters here. ...
-
Philips SNA6640 - page 21
EN 21 Security Firewall The ADSL Wireless Modem Router's firewall inspects packets at the application layer, maintains TCP and UDP session information including time-outs and the number of active sessions, and provides the ability to detect and prevent certain types of network attacks. Network attacks that deny access to a network device are c ...
-
Philips SNA6640 - page 22
EN 22 Schedule Rule You may filter Internet access for local clients based on rules. Each access control rule may be activated at a scheduled time. Define the time schedule on this page, and apply the rule on the Access Control page. Intrusion Detection Intrusion Detection Feature Stateful Packet Inspection (SPI) and Anti-DoS firewall protection (D ...
-
Philips SNA6640 - page 23
EN 23 Wireless security Wireless Encryption To make your wireless network safe, you should turn on the security function. The ADSL Wireless Modem Router supports WEP (Wired Equivalent Privacy), WPA/WPA2 (Wi-Fi Protected), and 802.1x security mechanisms. Access Control Access Control allows users to define the outgoing traffic permitted or not-permi ...
-
Philips SNA6640 - page 24
EN 24 WPA/WPA2 Wi-Fi Protected Access (WPA/WPA2) combines temporal key integrity protocol (TKIP) and 802.1x mechanisms. It provides dynamic key encryption and 802.1x authentication service. 802.1X If 802.1x is used in your network, then you should enable this function for the ADSL Wireless Modem Router. These parameters are used for the ADSL Wirele ...
-
Philips SNA6640 - page 25
EN 25 Home network settings Status The Status page displays WAN/LAN connection status, firmware, and hardware version numbers, illegal attempts to access your network, as well as information on DHCP clients connected to your network. The security log may be saved to a file by clicking ‘Save’ and choosing a location. Network settings Use the Hom ...
-
Philips SNA6640 - page 26
EN 26 WDS If the signal strength of a single wireless modem router is not sufficient due to a large coverage area or attenuation due to walls, with WDS the range of a wireless modem router can be extended. All modem routers in a Wireless Distribution System must be configured with the same radio channel, and encryption type (WEP / WPA/WPA2) if that ...
-
Philips SNA6640 - page 27
EN 27 Advanced settings NAT Network Address Translation allows multiple users to access the Internet sharing one public IP. Address Mapping Allows one or more public IP addresses to be shared by multiple internal users. This also hides the internal network for increased privacy and security. Enter the Public IP address you wish to share into the Gl ...
-
Philips SNA6640 - page 28
EN 28 Maintenance Use the Maintenance menu to backup the current configuration, restore a previously saved configuration, restore factory settings, update firmware, and reset the ADSL Wireless Modem Router. Configuration Tools Choose a function and click Next. Backup allows you to save the ADSL Wireless Modem Router's configuration to a file. ...
-
Philips SNA6640 - page 29
EN 29 WARNING! When you reset the ADSL Wireless Modem Router using the blue reset button all configuration settings will be lost, also your ISP settings. Enter a maximum Idle Time Out (in minutes) to define a maximum period of time for which the login session is maintained during inactivity. If the connection is inactive for longer than the maximum ...
-
Philips SNA6640 - page 30
EN 30 UPNP (Universal Plug and Play) settings With Universal Plug and Play, a device can automatically dynamically join a network, obtain an IP address, communicate its capabilities, and learn about the presence and capabilities of other devices. Devices can then directly communicate with each other. This further enables peer-to-peer networking QoS ...
-
Philips SNA6640 - page 31
EN 31 Routing These pages define routing related parameters, including static routes and RIP (Routing Information Protocol) parameters. Static route parameter 1 Click ‘Add’ to add a new static route to the list. 2 Click ‘Save Settings’ to save the configuration. RIP parameter RIP sends routing-update messages at regular intervals and when t ...
-
Philips SNA6640 - page 32
EN 32 Windows 98/ME Click Start/Run. Type ‘winipcfg’ and press ‘ENTER’. The MAC address is in the ‘Adapter Address’ section. Windows NT4/2000/XP Click Start/Programs/Command Prompt. Type ‘ipconfig /all’ and press ‘ENTER’. The MAC address is listed as the ‘Physical Address.’ Macintosh Click System Preferences/Network. The MAC ...
-
Philips SNA6640 - page 33
EN 33 Double-click the ‘Network and Internet connections’ icon. Click in the list to the left on ‘Setting-up a home network or small business network’. The Wizard Network Setup appears. Click ‘Next’ to continue. Wizard Network Settings 1. Please, carefully read the instructions the Wizard gives you, and adapt your choices to the type of ...
-
Philips SNA6640 - page 34
EN 34 1. Enter a description that helps you recognize the computer. 2. Enter a name that is different for each computer. 3. Click ‘Next’ to continue. Enter the same workgroup name for all computers in the network, then click ‘Next’ to continue. Choose to make a networking setup disk. Then click 'Next'. Click ‘Finish’ to close ...
-
Philips SNA6640 - page 35
EN 35 To explore the network: Double-click the Network Environment icon on the desktop. If you need more information, consult Windows Help. For Windows 98SE and Windows ME. See earlier on in this chapter for Windows XP and Windows 2000. Click the Windows Start button, click ‘Settings’, and click ‘Control Panel’ from the list. Double-click t ...
-
Philips SNA6640 - page 36
EN 36 1. Enter a name that is different for each computer. 2. Enter the same workgroup name for all computers in the network. 3. Enter a description that helps you recognize the computer. 4. Click on the ‘Configuration’ tab to continue. Click the ‘Sharing files and printers’ button. Select the access options you want, and click ‘OK’ to ...
-
Philips SNA6640 - page 37
EN 37 Click ‘OK’ to accept the changes. To share folders with the network: Start Windows Explorer and right-click the folder you wish to share with the network. Click the ‘Sharing’ tab and adapt the settings. To explore the network: Double-click the Network Environment icon on the desktop. If you need more information, consult Windows Help. ...
-
Philips SNA6640 - page 38
EN 38 Troubleshooting This section describes common problems you may encounter and possible solutions to them. The ADSL Wireless Modem Router can be easily monitored through panel indicators to identify problems. Problem Solution Power LED is Off • Check connections between the ADSL Wireless Modem Router, the external power supply, and the wall o ...
-
Philips SNA6640 - page 39
EN 39 Physical Characteristics Ports – Four 10/100Mbps RJ-45 Ports – One ADSL RJ-11 ADSL Features – Supports DMT line modulation – Supports Annex A Full-Rate ADSL: up to 8 Mbps downstream, up to 1 Mbps upstream (G.992.1 &T1.413, Issue 2) – Supports G.Lite ADSL: up to 1.5 Mbps downstream, up to 512 Kbps upstream – Dying GASP support ...
-
Philips SNA6640 - page 40
EN 40 Sensitivity Modulation Rate- Receiver 2.412 ~ 2.484 HGz Sensitivity (dBm) 802.11b - 1Mbps - (90 dBm) 802.11b - 2Mbps - (88 dBm) 802.11b - 5.5Mbps - (85 dBm) 802.11b- 11Mbps - (84 dBm) Modulation Rate-Receiver Sensitivity Typical (dBm) 802.11g - 6Mbps - (88 dBm) 802.11g - 9Mbps - (87 dBm) 802.11g - 12Mbps - (84 dBm) 802.11g - 18Mbps - (82 dBm) ...
-
Philips SNA6640 - page 41
...
-
Philips SNA6640 - page 42
Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. 2006 © Koninklijke Philips Electronics N.V. All rights reserved. www.philips.com DFU-SNA6640-ENG-V1.0 Guarantee certificate Certificat de garantie Garantieschein Garantiebewijs Certificado de garantia ...
У вас вопрос, касающийся Philips SNA6640?
Воспользуйтесь формуляром, находящимся ниже
Если с помощью найденной инструкции Вы не решили свою проблему с Philips SNA6640, задайте вопрос, заполнив следующий формуляр. Если у какого то из пользователей была похожая проблема с Philips SNA6640 со всей вероятностью он захочет поделиться методом ее решения.