-
Moxa VPort 25 - page 1
Moxa VPort 25 V ideo Encoder User ’ s Manual First Edition, July 2008 © 2008 Moxa Inc . A ll rights reserved. Reproducti on without perm ission is prohibit ed. ...
-
Moxa VPort 25 - page 2
Moxa VPort 25 IP Camera User’s Manual The software d escribed in this m anual is furni shed under a license agreem ent and may be used only in accordance with the term s of that agreement. Copyright Notice Copyright © 2008 Moxa Inc. All rights reserved. Reproducti on without perm ission is prohibit ed. Trademarks MOXA is a re gistered tradem ark ...
-
Moxa VPort 25 - page 3
Before getting started Before usin g your VPort 25, please pay close attention t o the followin g items: After opening the VPort 25 box, co mpare the contents of the box with th e Package Checklist in Chapter 1 . Notify your sales representative if any of the items is missing or damaged. To prevent da mage or proble ms caused by im proper u ...
-
Moxa VPort 25 - page 4
Table of Contents Chapter 1 Introduction .................................................................................................. 1-1 Overview....................................................................................................................... ........... 1-2 Package Ch ecklis t .......................................... ...
-
Moxa VPort 25 - page 5
1 1 Chapter 1 Introduction The VPort 25 series of high-p erformance IP cameras can handle basic vi deo feeds, and suppo rt many advanced features for settin g up surveillan ce or web attraction ap plications. The VPort 25 series is design ed for outdoo r applications that req uire a rugged form factor, high vide o performance, a nd easy-to-use func ...
-
Moxa VPort 25 - page 6
VPort 25 User’s Manual Introduction 1-2 Overview The VPort 25 is a vandal- proof, IP66-rated , fixed dome IP camera for use in ha rsh, outdoor environm ents. With a maximum resolution of 5 20 TVL and day -and-night CC D camera lens, the VPort 25 is especially well-suited for h igh performance video surveillance app lications. To meet the outdoor ...
-
Moxa VPort 25 - page 7
VPort 25 User’s Manual Introduction 1-3 Easy web access using standard browsers There is no nee d to install new software to access the video encoder, si nce the embedded web server allows users to use any popular web br owser to access the video encoder from anywhere over the Internet. As long as you are connected to the network, you will be abl ...
-
Moxa VPort 25 - page 8
VPort 25 User’s Manual Introduction 1-4 Package Checklist Moxa VPort 25 is shipped with the following items. If any of these items is missing or damaged, please contact your custom er serv ice representative for assistance. Moxa’s VPort 25 is shipped with the fo llowing items. If any of these items is missing or damaged, please contact your cus ...
-
Moxa VPort 25 - page 9
VPort 25 User’s Manual Introduction 1-5 y Accessible IP filtering y 1 DI and 1 Rel ay output for sensor a nd alarm y Video loss and N etwork broken alar m y Support SMTP and FTP for alarm message transm ission y Redundant power inputs with 12/24 VDC, 24 VAC power input and PoE (8 02.3af) y Built-in case-open sen sor, which can trigger the relay a ...
-
Moxa VPort 25 - page 10
VPort 25 User’s Manual Introduction 1-6 Product Description Form Factor IP Camera Module Upper Case Bottom Case Inner Case V ari-focal Rot ation Plate Analog V ideo Output Swit ch LED Instructor DIP Swit ch Reset Button 9-pin T erminal Block for DI/DO/Audio 2-pin T erminal block for Power input Case Open Sensor T ilt adjustment screw Inner case f ...
-
Moxa VPort 25 - page 11
VPort 25 User’s Manual Introduction 1-7 Vari-focal Lens The VPort 25 series comes with a vari-focal lens for providing high quality video images. Users can adjust the Zo om and Focus ma nually to get cl ear im ages regardless of the site environment. Switchboard Users can enabl e or disable the f unctions on the swi tchboard based on t he camera? ...
-
Moxa VPort 25 - page 12
VPort 25 User’s Manual Introduction 1-8 DC Auto Iris Switch The DC Auto Iris Switch is used to adjust the brightness of the camera im age. Turn the switch counterclockwise to achieve a brightener vi deo image, and turn it clockwise to m ake the image less bright. In add ition, we suggest adjustin g the Auto Iris switch with a 0.4 x 2.0 mm ceramic ...
-
Moxa VPort 25 - page 13
VPort 25 User’s Manual Introduction 1-9 SW-5: MIRROR (Mirror Function) When the Mirror func tion is activated, the imag e will appear as if you are viewing it through a rearview mirro r. ON: Activate the Mirror func tion OFF: Disable the function (Default) SW-6: GAMMA (Gamma Correction) ON: 1.0 OFF: 0.45 (Default) Pan Rotation Plate and Tilt Adju ...
-
Moxa VPort 25 - page 14
VPort 25 User’s Manual Introduction 1-10 NO (Norm al Open) C (Comm on) DO (Relay Output) NC (Norm al Close) Max. 1A, 24 VDC Initial status is Normal Open + DI (Digital Input) - High: +13V to +30V Low: -30V to +3V LED Indicators and DIP Switches The VPort 2 5 has 4 LEDs f or indicating the power status, 10 Mbps link , 100 Mbps lin k, and system st ...
-
Moxa VPort 25 - page 15
VPort 25 User’s Manual Introduction 1-11 Te x t LED Description D7 Power On: power on Off: power off D8 100 Mb ps On: Ethernet li nk is 100 Mbps D9 10 Mbps On: Ethernet l ink is 10 Mbps Red On Hardware initialization Red blinking Software initialization Green On System boot -up D12 System Green blinkin g Firmware upgrade proceeding DIP Switch 1 R ...
-
Moxa VPort 25 - page 16
2 2 Chapter 2 First Time Installation and Configuration This chapter includ es information about how to install a VPort 25 IP camera. The following t opics are covered: Before Getting Started ¾ Hardware Installation ¾ Software Installation Mounting Dimensions (uni t=mm) Wiring Requirements ...
-
Moxa VPort 25 - page 17
VPort 25 User’s Manual First Time Installaton and Configuration 2-2 Before Getting Started Before installing the VPort 25, check to mak e sure that all items in the Package Checklist are in the box. In addition, you will need access to a notebook computer or PC equi pped with an Ethernet port. Hardware Installation Step 1: Open and remove the upp ...
-
Moxa VPort 25 - page 18
VPort 25 User’s Manual First Time Installaton and Configuration 2-3 Step 2: Remove the inner c ase. Step 3: Remove the I P camera module. ...
-
Moxa VPort 25 - page 19
VPort 25 User’s Manual First Time Installaton and Configuration 2-4 Step 4: Connect the cables. a) Open the conduit hole. ...
-
Moxa VPort 25 - page 20
VPort 25 User’s Manual First Time Installaton and Configuration 2-5 b) Prep are the cab le gland ( if requir ed). c) Use the cable gland t o assemble the cables. ...
-
Moxa VPort 25 - page 21
VPort 25 User’s Manual First Time Installaton and Configuration 2-6 NOTE When install ing the cable gla nd, make sure the 2 rubber rings are assem bled properly for IP 66 protection. If necessary, use silicon sealant. d) Connect the cables to the IP cam era module’s connectors. ...
-
Moxa VPort 25 - page 22
VPort 25 User’s Manual First Time Installaton and Configuration 2-7 NOTE Be sure to arrange the cables car efully to make sure th at all cables are connected properly. We recommend connecting the Ethernet ca ble first, an d then the 9-pin termi nal block. Connec t the 2-pin term inal block la st. NOTE The conduit hole must face downward to provid ...
-
Moxa VPort 25 - page 23
VPort 25 User’s Manual First Time Installaton and Configuration 2-8 Step 6: Fasten the bottom case with the four copper pillar screws. b) Mounting on the accessory ’s mounting kit (VP-MK) Step 1: Fasten the bottom case on the plate with th e four copper pillar screws. Step 2: Assemble the mounting kit with the selected accessory. NOTE Choose th ...
-
Moxa VPort 25 - page 24
VPort 25 User’s Manual First Time Installaton and Configuration 2-9 Step 7: Assemble the IP Camera Module and upper case with the bottom case. Step 8: To get the desired video im age, adjust the angles and zoom strength. a) Pan rotation ...
-
Moxa VPort 25 - page 25
VPort 25 User’s Manual First Time Installaton and Configuration 2-10 b) Tilt adjustment ...
-
Moxa VPort 25 - page 26
VPort 25 User’s Manual First Time Installaton and Configuration 2-11 c) Zoom adj ustment ...
-
Moxa VPort 25 - page 27
VPort 25 User’s Manual First Time Installaton and Configuration 2-12 Step 9: Fasten the silica gel desiccant in the inner case. ...
-
Moxa VPort 25 - page 28
VPort 25 User’s Manual First Time Installaton and Configuration 2-13 NOTE The effect of the silica gel desiccant will de crease after being used for particular time period. Silica gel desiccants are com monly available, and can be replaced with the hook fastener. ...
-
Moxa VPort 25 - page 29
VPort 25 User’s Manual First Time Installaton and Configuration 2-14 Step 10: Complete the hardware installation. Software Installation Step 1: Configure the VPort 25’s IP addres s When the VPort 25 is first powered on, the PO ST (Power On Self Test) will run for a few moments. The System LED will turn green when the POST is complete. The 10 Mb ...
-
Moxa VPort 25 - page 30
VPort 25 User’s Manual First Time Installaton and Configuration 2-15 2. Whe n the search has co ncluded, the Model Name , MAC address, IP address, serial port, and HTTP port of the VPort will be listed in the utility’s window. NOTE The Serial number is the production serial nu mber of this VPort, and the HTTP Port number is the http port used b ...
-
Moxa VPort 25 - page 31
VPort 25 User’s Manual First Time Installaton and Configuration 2-16 NOTE For Windows XP SP2 or above operating system s, the ActiveX Control component will be blocked for system security reasons. In th is ca se, the VPort’ s security warning m essage window may not appea r. Users shoul d unlock the Act iveX control bl ocked functio n or disabl ...
-
Moxa VPort 25 - page 32
VPort 25 User’s Manual First Time Installaton and Configuration 2-17 Step 5: Access VPort’s sys tem configuration. Click on System Co nfigurat ion to access the overview of the syst em configuration to c hange the configuration. Model Name, Server Name, IP Address, MAC Address, Firmware Version , and LED Status appear in the green bar near the ...
-
Moxa VPort 25 - page 33
VPort 25 User’s Manual First Time Installaton and Configuration 2-18 Mounting Dimensions (unit=mm) Rear View Front View Side View 1 18.9 142 84.8 84.8 42.4 25 42.4 32 15 55.4 55.4 32 32 71 Wiring Requirements ATTENTION Be sure to disconnect th e power cord befor e installing and/or wir ing your Moxa VPort 25. Calculate the maximum poss ible curre ...
-
Moxa VPort 25 - page 34
3 3 Chapter 3 Accessing VPort 25’s Web-based Manager This chapter includes inform ation about how to access VPort 25 IP camera for t he first time. The following t opics are covered: Functions Featured on the VPort’s Web Homepage ¾ VPort’s Information ¾ Server Name ¾ Camera Image View ¾ Audio Co ntrol ¾ Client Setting ¾ System C onf ...
-
Moxa VPort 25 - page 35
VPort 25 User’s Manual Accessing VPort 25’s Web-ba sed Manager 3-2 Functions Featured on the VPort’s Web Homepage The homepage of th e VPort’s web co nsole shows in formation specific to that VPort, the camera image, and configurations for client and server. NOTE The VPort’s web homepage is best viewed using a 1280 x 1024 screen size . Th ...
-
Moxa VPort 25 - page 36
VPort 25 User’s Manual Accessing VPort 25’s Web-ba sed Manager 3-3 Server Name A server nam e can be assigned to each server . Administrators can change t he name in System Configuration/Syste m/General . The m aximum length of the sever nam e is 40 bytes. Camera Image View The assigned image descrip tion and system date/time will be displayed ...
-
Moxa VPort 25 - page 37
VPort 25 User’s Manual Accessing VPort 25’s Web-ba sed Manager 3-4 System Configuration A button or text link on the left side of t he system confi guration win dow only appears o n the administ rator’s main page. Fo r detailed system c onfiguration instructions, refer to Chapter 4, System Configurati on . Video Information Users can easily m ...
-
Moxa VPort 25 - page 38
4 4 Chapter 4 System Configuration After installing the hardware, the next step is to configure the VPort 25’s settin gs. Users can configure by web consol e. This chapter includ es the following sections: System Configurati on by Web Console ¾ System ¾ Network ¾ Video ¾ Audio ¾ Alarm ...
-
Moxa VPort 25 - page 39
VPort 25 User’s Manual System Configuration 4-2 System Configuration by Web Console System confi guration can be done remote ly with Internet Explorer. To access the server, type the system configuration URL, http://<IP ad dress of Vide o Server>/setup/config.html , to ope n the configuratio n main page. There are five configuration categor ...
-
Moxa VPort 25 - page 40
VPort 25 User’s Manual System Configuration 4-3 System General Settings On the General Settin gs page, admini strators can set up the video Server name and the Date and Time , which appear in th e image’s caption. ...
-
Moxa VPort 25 - page 41
VPort 25 User’s Manual System Configuration 4-4 Server name Setting Description Default Server Name (max. 40 characters) Use a dif ferent server name for each IP camera to help identify the different servers. The name appears on the web homepage. VPort 25 IP Camera Date and Time Setting Description Default Keep curren t date and time Use the curr ...
-
Moxa VPort 25 - page 42
VPort 25 User’s Manual System Configuration 4-5 Admin password Setting Description Default Admin Password (max. 14 chara cters) Administ rator can type the ne w password in this box. Confirm Passw ord (max. 14 chara cters) If a new password is typed in the Admin Password box, you will need to rety pe the password in the Confirm Password box befor ...
-
Moxa VPort 25 - page 43
VPort 25 User’s Manual System Configuration 4-6 System Diagnosis VPort pro ducts have a self-di agnosis functio n to let the adm inistrator get a quick view of t he system and c onnection status . Administrator s can save this diagno sis information i n a file (diagnosis.l og) by clicki ng the Export to a File b utton, or send the file via email ...
-
Moxa VPort 25 - page 44
VPort 25 User’s Manual System Configuration 4-7 System Parameters The System Parameters page allows you to view all system parameters, which are listed by category. The content is the s ame as the VPort’s sy s_confi g.ini file. Admini strators can also save this information in a file (sys_config.ini) by clicking the Export to a File button, or ...
-
Moxa VPort 25 - page 45
VPort 25 User’s Manual System Configuration 4-8 Take the following steps to upgrad e the firmware: Step 1: Press the Browse button to select the firmware file. NOTE For the VP ort 25, the fi rmware file ext ension shoul d be .rom . Step 2: Click on the Upgrade button to upload the firmware to the VPort. Step 3: The system will start to run the fi ...
-
Moxa VPort 25 - page 46
VPort 25 User’s Manual System Configuration 4-9 Reboot From the “Device Reboot” page, click on OK (as shown in th e following figure) to restart the VPort. Network General Network Settings The General Network Settings page includes som e basic but im portant network c onfigurations that enable the VPort to be con nected to a TCP/IP network. ...
-
Moxa VPort 25 - page 47
VPort 25 User’s Manual System Configuration 4-10 Access Method VPort pro ducts support the DHCP protocol, which means that V Port can get it s IP address from a DHCP server automatically when it is connected to a TCP/IP network. The Administrator should determine if it is more appropriate to use DHCP, or assign a fixed IP. Setting Description Def ...
-
Moxa VPort 25 - page 48
VPort 25 User’s Manual System Configuration 4-11 RTSP Streaming The VPort 2 5 supports standar d RTSP (Real Tim e Streaming Pr otocol) stream ing, which m eans that all devices and software that support RTSP can di rectly acquire and view the video im ages sent from VPort 25 without a ny proprietary codec or SDK i nstallations. This m akes networ ...
-
Moxa VPort 25 - page 49
VPort 25 User’s Manual System Configuration 4-12 Step 3: Wait a few seconds for QuickTime Player to establish the co nnection. Step 4: After the connection has been establish ed, the VPort 25’s video will ap pear in the QuickTime Player display window. NOTE The video per formance of the VP ort 25 in other m edia players ma y not always be the s ...
-
Moxa VPort 25 - page 50
VPort 25 User’s Manual System Configuration 4-13 1st SMTP Server and Sender Email Setting Description Default 1 st /2 nd SMTP (mail) server SMTP Server ’ s IP address or URL address. None 1 st /2 nd SMTP account name None 1 s t /2 n d SMTP For security reasons, most SMTP servers require the account nam e and pa s s wo r d to be authenticated. N ...
-
Moxa VPort 25 - page 51
VPort 25 User’s Manual System Configuration 4-14 FTP Server Settings FTP is the othe r method avail able for the VPort t o send alarm messages and snapshots. 1st FTP Server Setting Description Default 1 st /2 nd FTP se rver FTP server ’ s IP address or URL address. None 1 st /2 nd FTP server po rt None 1 st /2 nd FTP user nam e FTP server ’ s ...
-
Moxa VPort 25 - page 52
VPort 25 User’s Manual System Configuration 4-15 Dynamic DNS DDNS (Dynamic Domain Name System) is a combination of DHCP, DNS, and client registration. DDNS allows administrators to alias VPort’s dynamic IP address to a static ho stname in any of the domains provi ded by the DDN S se rvice provid ers listed on VPor t’s Network/DDNS configurati ...
-
Moxa VPort 25 - page 53
VPort 25 User’s Manual System Configuration 4-16 NOTE Different DDNS service prov iders have different applicatio n rules. Some ap plications are free of charge, but most requir e an application fee. Universal PnP UPnP (Universal Plu g & Play) is a networ king architect ure that provides compatibility am ong networking e quipment, soft ware, ...
-
Moxa VPort 25 - page 54
VPort 25 User’s Manual System Configuration 4-17 y Reduces the load on the source (for exam ple, a server) because it doe s not need to produce multiple copies of the same data. y Makes efficient use of net work bandwidth a nd s cales well as the number of participants or collaborators expands. y Work s with other IP protocols and services, such ...
-
Moxa VPort 25 - page 55
VPort 25 User’s Manual System Configuration 4-18 Configuring Multicast Settings Setting Description Default Multicast gr oup address Multicast Gr oup address for sending video stream . 239.127.0.100 Multicast vide o port V ideo port num ber . 5556 Multicast audi o port Audio p ort number . 5558 Multicast TTL Multicast-TTL (T ime-to-live) threshol ...
-
Moxa VPort 25 - page 56
VPort 25 User’s Manual System Configuration 4-19 Accessible IP List The VPort 25 uses an IP address-based filte ring method to control access to the VPort. Accessible IP Set tings allow you to a dd or remove “Legal ” remote host IP addresses to prevent unauthorized access. Access t o the VP ort is controlled by IP address. That is, if a host? ...
-
Moxa VPort 25 - page 57
VPort 25 User’s Manual System Configuration 4-20 SNMP VPort supp orts three SNMP protocols. The a vailable protoc ols are SNMP V1, S NMP V2c, and SNMP V3. S NMP V1 and S NMP V2c use a com munity string match for aut hentication, whic h means that SNMP servers access a ll objects with read-only or read/write permissions using the community string ...
-
Moxa VPort 25 - page 58
VPort 25 User’s Manual System Configuration 4-21 Configuring SNMP Settings The following figures indicate which SNMP parameters can be configured. A more detailed explanation of each param eter is given below the figure. SNMP Read/ Wirte Settings SNMP Versions Setting Descripti on Default V1, V2c, V3 Select SNMP Versions V1, V2c , V3 protocol to ...
-
Moxa VPort 25 - page 59
VPort 25 User’s Manual System Configuration 4-22 V1, V2c Read/Wirte Community Setting Descripti on Default V1, V2c Read/Write Community Use a comm unity string m atch for authentication, which means that the SNMP agent accesses all objects with read-only pe rmissions using the communit y string public . public (max. 30 chara cters) For SNMP V3, t ...
-
Moxa VPort 25 - page 60
VPort 25 User’s Manual System Configuration 4-23 User Data Encryption Key (F or SN MP V1, V2c, V 3 and V3 only) Setting Descripti on Default Enable 8-character data encryption key is the minimum requirement for data encryption. Maximum 30-character encryption key No Disable No data enc ryption No Trap Settings Setting Description Default Tr a p S ...
-
Moxa VPort 25 - page 61
VPort 25 User’s Manual System Configuration 4-24 Setting Description Factory Default Enable ToS Enable the ToS for transmitting the vid eo stream with the given priority Disable DSCP Value Set the mappi ng table of diffe rent ToS value s 0, 0 NOTE To configure t he ToS values, please m apping to the net work environm ent settings fo r the QoS pri ...
-
Moxa VPort 25 - page 62
VPort 25 User’s Manual System Configuration 4-25 Video Image Settings Image Information Setting Description Default Description (max. of 14 characters) The cust omized de scriptio n shown on t he caption or image to identify th is video camera. None Image Appearance Setting Description Default Image Inform ation T o determine what style of i mage ...
-
Moxa VPort 25 - page 63
VPort 25 User’s Manual System Configuration 4-26 Video Performance VPort 25 s upport MPEG4 or MJEPG compression standard. Users sho uld select the video compression in first t o identify the video stream format. For MJPEG , users ca n setup the Resolution, Frame R ate and Video Quality in Fixed Quality . ...
-
Moxa VPort 25 - page 64
VPort 25 User’s Manual System Configuration 4-27 For MPEG4 , users can set up Resolution, Frame Rate and Video Quality in Fixed Bit Rate or Fixed Quality . Resolution The VPort 25 supports 5 different reso luti ons: Full D1, 4CIF, VGA, CIF, and QVGA. Setting Description Default Select the image size 5 image resolutions (size) are provided. The ad ...
-
Moxa VPort 25 - page 65
VPort 25 User’s Manual System Configuration 4-28 NOTE Frame rate (frames per second) is determined by the resolution, image data size (bit rate), and transmission traffic status. Th e Ad ministrator and users can chec k the frame rate status in the FPS Stat us on VPort’s web hom epage. NOTE A large “Key frame interval” can reduce t he bit r ...
-
Moxa VPort 25 - page 66
VPort 25 User’s Manual System Configuration 4-29 Audio Audio Source The VPort 25 supp orts real-time and synchron ous video/audio transm ission. Admini strators need to select the co rrect input type of audio sourc e to avoid audi o input dist ortion. Setting Description Default Audio Sour ce For the audio connection , MIC-in (microph one) and Li ...
-
Moxa VPort 25 - page 67
VPort 25 User’s Manual System Configuration 4-30 Alarm System Alarm In addition to the LED indicators, two kinds of system alarm are provided by the VPort 25 for notifying t he system operat ion administ rator. Alarm T ype T riggere d Condition T rigger ed Action Case Open Alarm The upper case is ope ned Email and R elay Output (DO) Network Disco ...
-
Moxa VPort 25 - page 68
VPort 25 User’s Manual System Configuration 4-31 Event Alarm Four kinds of event alarm are provided by the VPort 25 for building an intelligent video surveillance system. Alarm T ype T riggere d Condition T rigger ed Action V ideo Motion Detec tion (VMD) 1. VMD 1 2. VMD 2 3 . V M D 3 1. Relay 2. Email 3. FTP 4. HTTP Event Server Digital Inputs DI ...
-
Moxa VPort 25 - page 69
VPort 25 User’s Manual System Configuration 4-32 Alarm Time Interval Setting Description Default Delay second(s) before detectin g the next alarm Set up the time interval for each event alarm triggered. 32 seconds (10 to 99 9 seconds) NOTE The delay befo re detecting the ne xt alarm cannot be less than the tim e needed to take a snapshot after an ...
-
Moxa VPort 25 - page 70
VPort 25 User’s Manual System Configuration 4-33 NOTE The relays will not be triggered when the Override Relay warning setting box is checked. Un-check this box to ensure that the relays will trigger. Schedule A schedule is provided to set event alarms for daily security app lications. Event Type Setting Description Default V ideo Loss, Digital I ...
-
Moxa VPort 25 - page 71
VPort 25 User’s Manual System Configuration 4-34 Setting Description Default □ Sun □ Mon □ Tu e □ We d □ Thu □ Fri □ Sat Select the weekday for scheduling even t alarms. None Begin 00:00 Set the beginning t ime of the event l 00:00 Duration 00:00 Set the time period of the event alarm to be activated. 00:00 NOTE Administrators can u ...
-
Moxa VPort 25 - page 72
VPort 25 User’s Manual System Configuration 4-35 Setting Description Def ault Enable VM D alarm Enable or disable the VMD al arm. Disable Show alert on the image when VMD is triggered Enable or disable alert for sections of the homepage image on the homepage. Disable NOTE Once the Show alert on the imag e when VMD is triggered is enabled, the red ...
-
Moxa VPort 25 - page 73
VPort 25 User’s Manual System Configuration 4-36 Trigger Conditions and Actions Administrators can set up trig gers for each VMD, including T rigger Relay alarm , Send snapshot image vi a E-mail, Send sn apshot image via FTP , an d HTTP Action Settings . How to Set up a VMD alarm Step 1: Check the Enable VMD alarm box. If the Administrator wants ...
-
Moxa VPort 25 - page 74
VPort 25 User’s Manual System Configuration 4-37 Digital Input One digital input is prov ided by the VPort 25 for linking with alarm detection devices, such as sensor. Setting Description Default Enable digital input alarm Enable or disable the digital in put alarm. Disable Trigger Conditions Setting Description Default High The DI is always in t ...
-
Moxa VPort 25 - page 75
VPort 25 User’s Manual System Configuration 4-38 Video Loss Setting Description Def ault Enable video loss alarm Enable or di sable video loss alarm. Disable T rigger Relay alarm Enabl e the trigg er action in trig gering Relay alarms. Disable Send Snapshot Im age Enable the trigger action to sen d a warning me ssage via email and FTP Disable Seq ...
-
Moxa VPort 25 - page 76
VPort 25 User’s Manual System Configuration 4-39 ...
-
Moxa VPort 25 - page 77
...
-
Moxa VPort 25 - page 78
A A Appendix A Frequently Asked Questions Q: What if I for get my password? A: Every access to the IP cam era needs authentica tion, unless the adm in password is set up as blank. If you are one of the manag ed users, you will need to ask the administrator for th e password. If you are the administ rator, there is no way to recover t he admin passw ...
-
Moxa VPort 25 - page 79
VPort 25 User’s Manual Frequently Asked Ques tions A-2 Q: How many us ers are a llowed to access the video enc oder at the same time? A: Basically, there is no limitation. However the video quality also depends on the network bandwidth. To achieve the best effect, the video encoder will allow 10 users for udp/tcp/htt p connections and 10 users fo ...
-
Moxa VPort 25 - page 80
B B Appendix B Time Zone Table The hour offsets for different ti me zones are sh own below. You will ne ed this information when setting the time zon e in automatic date/time synchron ization. GMT stands for Greenwich Mean Time, which is the global time that all time zon es are measured from. (GMT -12:00) International Date Line W est (GMT -11:00) ...
-
Moxa VPort 25 - page 81
VPort 25 User’s Manual Time Zone Table B-2 (GMT+02:00) Hara re, Pretoria (GMT+02:00) Helsinki, Kyiv , Riga, Sofia, T allinn, V ilnius (GMT+02:00) Jeru salem (GMT+0 3:00) Baghda d (GMT+03:00) K uwait, Riyadh (GMT+03:00) Mo scow , S t. Petersbu rg, V olgograd (GMT+03: 00) Nairobi (GMT+0 3:30) T ehran (GMT+04:00) Abu Dhabi, Muscat (GMT+04:00 ) Baku, ...
-
Moxa VPort 25 - page 82
C C Appendix C Technical Specifications Camera Sensor 1/3” Sony Super HAD or 1/3” Sony ExV iew Lens W ide end: F1.4, Diagonal 9 7.61° / Horizont al 76.92° T ele End: F2 .4, Diagonal 28. 37° / Horizont al 22.73° Focal length: F= 3.7~12 mm Modulation NTSC or P AL Camera Angle pan ±180°, tilt ±85°, rotation ±170° Illumination (Low light ...
-
Moxa VPort 25 - page 83
VPort 25 User’s Manual Technical Specifications C-2 Audio In put 1 Line-in or MIC -in with 2-pi n terminal bloc k connector Audio Out put 1 Line out with 2-pin t erminal block c onnector Network Protocols TCP , UDP , HTTP , SMTP , FTP , T elnet, NTP , DNS, DHCP , UPnP , R TP , R TSP , ICMP , IGMPv3, SNMPv3, DDNS Ethernet 1 10/100BaseT(X) a uto ne ...
У вас вопрос, касающийся Moxa VPort 25?
Воспользуйтесь формуляром, находящимся ниже
Если с помощью найденной инструкции Вы не решили свою проблему с Moxa VPort 25, задайте вопрос, заполнив следующий формуляр. Если у какого то из пользователей была похожая проблема с Moxa VPort 25 со всей вероятностью он захочет поделиться методом ее решения.