-
Smeg CMSC45 - page 1
MACCHINA PER CAFFÈ E CAPPUCCINO COFFEE AND CAPPUCCINO MAKER MACHINE À CAFÉ ET À CAPPUCCINO KAFFEE-/CAPPUCCINO-VOLLAUTOMA T KOFFIE- EN CAPPUCCINOAPP ARAA T CAFETERA P ARA CAFÉ Y CAPUCHINO MÁQUINA DE CAFÉ E CAPPUCCINO ΜΗΧΑΝΗ ΚΑΦΕ ΚΑΙ CAPPUCCINO КОФЕМАШИНА ДЛЯ ПРИГОТОВЛЕНИЯ КОФЕ И КАПУЧЧИНО P ...
-
Smeg CMSC45 - page 2
A B A1 A2 A3 A4 A5 A8 A12 A13 A18 A20 A14 A17 A16 A15 A9 A6 A7 A19 A21 A22 A23 A24 A7 A9 A10 A11 B1 B7 B6 B8 B9 B2 B3 B4 B5 A25 ...
-
Smeg CMSC45 - page 3
1 4 56 7 8 91 0 1 1 1 2 13 14 16 2 15 3 2 1 ...
-
Smeg CMSC45 - page 4
17 18 22 19 20 24 27 21 25 26 23 1 2 28 12 1 2 3 4 5 6 7 8 9 10 11 12 1 ...
-
Smeg CMSC45 - page 5
6 INDEX INTRODUCTION .........................7 Symbols used in these instructions ..........7 Letters in brackets .....................................7 T roubleshooting and repairs ......................7 SAFETY ...................................7 Fundamental safety warnings ....................7 Designated use .................................. ...
-
Smeg CMSC45 - page 6
INTRODUCTION Thank you for choosing the automatic coffee and cappuccino maker . We hope you enjoy using your new appliance. T ake a few minutes to read these instructions. This will avoid all risks and damage to the ma- chine. Symbols used in these instructions Important warnings are identified by these sym- bols. These warnings must absolutely be ...
-
Smeg CMSC45 - page 7
8 Important! Do not grasp the coffee maker when it is out of the cabinet. Do not rest reci- pients containing liquids or inflammable or cor - rosive materials on top of the appliance. Place the accessories required to prepare the coffee (the measure for example) in the special holder . Do not rest large objects which could obstruct mo- vement or un ...
-
Smeg CMSC45 - page 8
9 button to display the next menu parameter). B8. Rinse button : performs a brief rinse to heat the infuser . (When you access the MENU: "CHANGE" button to modify menu parameters). B9. button: to deliver hot water or confirm. (When you access the MENU: OK button to confirm menu parameters). PRELIMINAR Y CHECKS Controls after transport Aft ...
-
Smeg CMSC45 - page 9
10 BUIL T -IN INST ALLA TION Verify the minimum measurements required for correct installation of the appliance. The coffee maker must be installed in a column and the column must be firmly fixed to the wall with commercially available brackets. Important: • Important: all installation or maintenance operations must be performed with the ap- plia ...
-
Smeg CMSC45 - page 10
11 Fix the power cable with the clip to avoid it tangling when the appliance is inserted or extracted. The power cable must be long enough to allow the appliance to be extracted from the cabinet to fill the coffee beans container . The appliance must be earthed in compliance Position the appliance on the rails, making sure the pins are correctly in ...
-
Smeg CMSC45 - page 11
12 USING THE APPLIANCE FOR THE FIRST TIME • Coffee has been used to factory test the ap- pliance and it is therefore completely normal for there to be traces of coffee in the mill. The machine is, however , guaranteed to be new . • Y ou should customise water hardness as soon as possible following the instructions in the "Setting water har ...
-
Smeg CMSC45 - page 12
13 9. "HOT W A TER PRESS OK" is displayed. 10. Press the OK button (B9) The appliance begins delivering hot water and the message "PLEASE WAIT ... " is di- splayed. After the flow of hot water stops, the ap- pliance automatically resets to "READY" sta- tus. Replacing the filter ("Filter Reset") When "REP ...
-
Smeg CMSC45 - page 13
14 a long coffee. T o make 2 coffees, press the button twice (within 2 seconds). T o change the quantity of coffee the ap- pliance delivers automatically into the cup, proceed as described in the following chap- ter . (The appliance now grinds the beans and starts delivering the coffee into the cup. Once the set amount of coffee has been deli- vere ...
-
Smeg CMSC45 - page 14
15 Important! when removing the drip tray , the grounds container must be emptied, even if it is not completely full. If this is not done, when you make the next coffees, the grounds container may fill up more than expected and clog the ma- chine. NOTE 8: Never extract the water tank while the machine is delivering coffee. If it is removed, it will ...
-
Smeg CMSC45 - page 15
16 deactivate the pre-ground coffee function by pressing the button (B2) (fig. 6) again to enable the coffee mill. NOTE 1: Never introduce pre-ground coffee when the machine is off or before pressing the button (B7) to avoid the coffee spreading through the inside of the appliance. NOTE 2: Never add more than 1 level measure, otherwise either the a ...
-
Smeg CMSC45 - page 16
17 This empties the cappuccino maker of all tra- ces of milk. IMPORT ANT : to ensure the hygiene of the ap- pliance, you are recommended to carry out this procedure each time you make cappuc- cino to avoid stale milk remaining in the cir - cuit. • Wait a few minutes for the cappuccino maker to cool down, then holding the cappuccino maker lever fi ...
-
Smeg CMSC45 - page 17
3. Empty the drip tray and grounds container (A4) and wash them; 4. Remove the drip tray complete with grounds container (A4). 5. Close the service door . Cleaning the water tank 1. Clean the water tank (A12) regularly (about once a month) with a damp cloth and a little mild washing up liquid. 2. Clean to remove all washing up liquid resi- dues, th ...
-
Smeg CMSC45 - page 18
19 7. Once inserted, make sure the two red but- tons have snapped out. 8. Replace the drip tray (A14) and grounds con- tainer . 9. Close the ser vice door (A2). CHANGING AND SETTING MENU P ARAMETERS After turning the knob (A7) and waiting for the appliance to be ready , you can use the inter- nal menu to modify the following parameters and function ...
-
Smeg CMSC45 - page 19
20 Use of other descalers invalidates the guarantee. Failure to descale the appliance as described also invalidates the guarantee. Over time, constant heating up of the water used to make the coffee leads to limescale building up in the inner circuits of the appliance. When "DESCALE" is displayed, the machine re- quires descaling. Proceed ...
-
Smeg CMSC45 - page 20
21 T o increase the number of hours the machine stays on (max. 3), proceed as follows: • Press the MENU button (B6) then press the NEXT button (B7) repeatedly until the ap- pliance displays: "OFF AFTER 1 HOUR". • Press the CHANGE button (B8) to change the number of hours the appliance remains on. • Press the OK button (B9) to confir ...
-
Smeg CMSC45 - page 21
22 extended period, place the main switch on the back of the appliance in the 0 position (A23). TECHNICAL SPECIFICA TION Voltage: 220-240 V~ 50/60 Hz max. 10A Absorbed power: 1350 W Pressure: 15 bars Water tank capacity: 1.8 litres Size LxHxD: 595x455x397 mm Weight: 23 kg The appliance complies with the follo- wing EC directives: • Low Voltage Di ...
-
Smeg CMSC45 - page 22
23 DISPLA YED MESSAGES DISPLA YED MESSAGE POSSIBLE CAUSE REMEDY FIL L TANK • The water tank is empty or positioned incorrectly . • Fill the tank with water and/or insert it correctly , pushing it as far as it will go. GROUND TOO FINE ADJUST MILL alternating with PRESS OK • The grinding is too fine and the coffee is delivered too slowly . • ...
-
Smeg CMSC45 - page 23
24 INSERT INFUSER ASSEMBL Y • The infuser has not been replaced after cleaning. • Insert the infuser as de- scribed in the chapter "Cleaning the infuser". DISPLA YED MESSAGE POSSIBLE CAUSE REMEDY CLOSE DOOR • The service door is open • Close the service door . FILL BEANS CONT AINER • The coffee beans have run out. • Fill beans ...
-
Smeg CMSC45 - page 24
25 PROBLEM POSSIBLE CAUSE REMEDY TROUBLESHOOTING Below is a list of some of the possible malfunctions. If the problem cannot be resolved as described, contact Customer Services. The coffee is not hot. • The cups were not pre- heated. • The infuser has cooled down because 2/3 minu- tes have elapsed since the last coffee was made. • Warm the cu ...
-
Smeg CMSC45 - page 25
26 The coffee is delivered too quickly . • The coffee is ground too coarsely . • T urn the grinding adju- stment knob one click an- ticlockwise towards "1" while the coffee mill is in operation (fig. 11). Avoid turning the grinding adjustment knob excessi- vely otherwise when you select 2 cups, the coffee may be delivered a drop at a ...
-
Smeg CMSC45 - page 26
27 RECIPES Coffee punch Ingredients (serves 6): 1/2 l of hot coffee 1/2 l of white Port 1/2 l of rum 100 g of candied brown sugar Method: Pour the coffee into a pot, add the rum and the Port and heat until it reaches boiling point. Gra- dually add the candied sugar , tasting now and then until sufficiently sweet. When the sugar has dissolved serve ...
-
Smeg CMSC45 - page 27
571321 1921 /02.09 10 ...
У вас вопрос, касающийся Smeg CMSC45?
Воспользуйтесь формуляром, находящимся ниже
Если с помощью найденной инструкции Вы не решили свою проблему с Smeg CMSC45, задайте вопрос, заполнив следующий формуляр. Если у какого то из пользователей была похожая проблема с Smeg CMSC45 со всей вероятностью он захочет поделиться методом ее решения.