-
Sanyo PLV75L/PLV-80L - page 1
Multimedia Pr oject or MODEL PL V -75/PL V -80 PL V75L/PL V -80L (Lensless) Owner ’ s Manual ...
-
Sanyo PLV75L/PLV-80L - page 2
2 CAUTION : T O REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPE ...
-
Sanyo PLV75L/PLV-80L - page 3
3 SAFETY INSTR UCTIONS All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. Follow all warnings and instructions ...
-
Sanyo PLV75L/PLV-80L - page 4
4 COMPLIANCES AC P ower Cor d f or the United Kingdom : This cord is already fitted with a moulded plug incorporating a fuse, the value of which is indicated on the pin face of the plug. Should the fuse need to be replaced, an ASTA approved BS 1362 fuse must be used of the same rating, marked thus . If the fuse cover is detachable, never use the pl ...
-
Sanyo PLV75L/PLV-80L - page 5
5 T ABLE OF CONTENTS FEA TURES AND DESIGN 6 BEFORE OPERA TION 15 PREP ARA TION 7 NAME OF EACH PART OF PROJECTOR 7 SETTING-UP PROJECTOR 8 CONNECTING AC POWER CORD 8 POSITIONING PROJECTOR 9 LENS INSTALLATION 9 ADJUSTABLE FEET 10 INSTALLING PROJECTOR IN PROPER POSITION 10 MOVING PROJECTOR 11 CONNECTING PR OJECT OR 12 TERMINALS OF PROJECTOR 12 CONNECTI ...
-
Sanyo PLV75L/PLV-80L - page 6
6 FEA TURES AND DESIGN This Multimedia Projector is designed with most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology. ◆ Compatibility This projector widely accepts various video and comput ...
-
Sanyo PLV75L/PLV-80L - page 7
7 PREP ARA TION NAME OF EA CH P ART OF PR OJECT OR BO TTOM OF CABINET BA CK OF CABINET HOT AIR EXHAUSTED ! Air blown from exhaust vent is hot. When using or installing a projector, following precautions should be taken. ● Do not put a flammable object near this vent. ● Keep rear grills at least 3.3’(1 m) away from any object, especially heat- ...
-
Sanyo PLV75L/PLV-80L - page 8
NO TE ON PO WER CORD AC Power Cord must meet requirement of country where you use a projector. Confirm an AC plug type with chart below and proper AC Power Cord must be used. If supplied AC Power Cord does not match your AC outlet, contact your sales dealer. SETTING-UP PR OJECT OR 8 PREP ARA TION To POWER CORD CONNECTOR on your projector. Pr ojecto ...
-
Sanyo PLV75L/PLV-80L - page 9
9 PREP ARA TION POSITIONING PR OJECT OR ● This projector is designed to project on a flat projection surface. ● Projector can be focused from 5.0’ (1.5m) ~ 52.2’ (15.9m). ● Refer to figure below to adjust screen size. Screen Size Distance 40” 30” 5.0’ (1.5m) 40” 5.0’(1.5m) 12.7’(3.9m) 25.6’(7.8m) 38.4’(11.7m) Max. Zoom Min ...
-
Sanyo PLV75L/PLV-80L - page 10
10 PREP ARA TION ADJUST ABLE FEET Picture tilt and projection angle can be adjusted by rotating ADJUSTABLE FEET. Projection angle can be adjusted to 10.5 degrees. Lift front of a projector and pull FEET LOCK LATCHES on both sides of a projector. 1 Release FEET LOCK LATCHES to lock ADJUSTABLE FEET and rotate ADJUSTABLE FEET to fine tune position and ...
-
Sanyo PLV75L/PLV-80L - page 11
11 PREP ARA TION CA UTION IN CARR YING OR TRANSPORTING A PR OJECT OR ● Do not drop or bump a projector, otherwise damages or malfunctions may result. ● When carrying a projector, use a suitable carrying case. ● Do not transport a projector by using a courier or transport service in an unsuitable transport case. This may cause damage to a proj ...
-
Sanyo PLV75L/PLV-80L - page 12
12 CONNECTING PR OJECT OR S–VIDEO R–AUDIO–L VIDEO/Y Cb/Pb Cr/Pr VIDEO/Y Cb/Pb Cr/Pr RESET CONTROL PORT A UDIO 1 A UDIO 2 ANALOG DIGIT AL(DVI-D) INPUT 1 INPUT 2 INPUT 3 R/C JACK GB R H /V V ( MONO ) TERMINALS OF PR OJECT OR When controlling the projector from a computer, connect the computer to this connector with a control cable. (Refer to P1 ...
-
Sanyo PLV75L/PLV-80L - page 13
13 CONNECTING PR OJECT OR S–VIDEO R–A UDIO–L VIDEO/Y Cb/Pb Cr/Pr VIDEO/Y Cb/Pb Cr/Pr RESET CONTROL PORT AUD I O 1 A UDIO 2 ANALOG DIGIT AL(DVI-D) INPUT 1 INPUT 2 INPUT 3 R/C JA CK GB R H/V V ( MONO ) CONNECTING T O COMPUTER IBM-compatible computer or Macintosh computer (VGA / SVGA / XGA / SXGA/SXGA+/WXGA/UXGA) Monitor Output Desktop type Lapt ...
-
Sanyo PLV75L/PLV-80L - page 14
14 CONNECTING PR OJECT OR CONNECTING T O VIDEO EQUIPMENT S–VIDEO R–AUDIO–L VIDEO/Y Cb/Pb Cr/Pr VIDEO/Y Cb/Pb Cr/Pr RESET CONTROL PORT A UDIO 1 A UDIO 2 ANALOG DIGIT AL(DVI-D) INPUT 1 INPUT 2 INPUT 3 R/C JACK GB R H/V V ( MONO ) Video Source (example) Video Cassette Recorder Video Disc Player S-VIDEO Cable ✽ Terminals of a Projector S-VIDEO ...
-
Sanyo PLV75L/PLV-80L - page 15
15 BEFORE OPERA TION ON-OFF SELECT COLOR M. MENU LIGHT I - INPUT 2 3 SCREEN SCREEN L L 1 D.ZOOM NO SHOW NO SHOW FREEZE MUTE MUTE Z Z F F KE Y S. I I CXTW INPUT IMAGE SELECTION KEYSTONE FOCUS LENS ZOOM V O L U M E - V O L U M E + AUTO PC AUTO OPERA TION OF REMO TE CONTROL LIGHT BUTTON Lights the buttons on the remote control for about 10 seconds. Us ...
-
Sanyo PLV75L/PLV-80L - page 16
16 BEFORE OPERA TION To insure safe operation, please observe following precautions : ● Use (2) AA, UM3 or R06 type alkaline batteries. ● Replace two batteries at same time. ● Do not use a new battery with an used battery. ● Avoid contact with water or liquid. ● Do not expose Remote Control Unit to moisture, or heat. ● Do not drop Remot ...
-
Sanyo PLV75L/PLV-80L - page 17
17 BEFORE OPERA TION T OP CONTR OLS AND INDICA T ORS Used to open or close MENU operation. (P18, 19) MENU BUTTON IMAGE BUTTON READY INDICATOR SELECT BUTTON POWER ON–OFF BUTTON INPUT BUTTON WARNING TEMP. INDICATOR LAMP INDICATOR POINT (VOLUME + / – ) BUTTONS LAMP REPLACE INDICATOR Used to select image level. (P29, 33) Lights green when a project ...
-
Sanyo PLV75L/PLV-80L - page 18
18 BEFORE OPERA TION HO W T O OPERA TE ON-SCREEN MENU You can control and adjust this projector through ON-SCREEN MENU. Refer to following pages to operate each adjustment on ON-SCREEN MENU. 2 MOVING POINTER 3 SELECT ITEM Move pointer ( ✽ see below) or adjust value of item by pressing POINT buttons on Top Control or on Remote Control Unit. Select ...
-
Sanyo PLV75L/PLV-80L - page 19
19 BEFORE OPERA TION MENU B AR FOR PC SOURCE Press MENU BUTTON while connecting to PC input source. FOR VIDEO SOURCE Press MENU BUTTON while connecting to VIDEO input source. PC SYSTEM MENU Used to select computer system. (Refer to P24, 25) SETTING MENU Used to change settings of projector or reset Lamp Replace Counter. (Refer to P38-43) IMAGE SELE ...
-
Sanyo PLV75L/PLV-80L - page 20
20 B ASIC OPERA TION TURNING ON THE PR OJECT OR TURNING ON / OFF PR OJECT OR Connect the projector's AC power cord into an AC outlet. The LAMP Indicator lights RED, and READY Indicator lights GREEN. Press the POWER ON-OFF button on the top control or on the remote control to ON. The LAMP Indicator dims, and the cooling fans start to operate. T ...
-
Sanyo PLV75L/PLV-80L - page 21
21 B ASIC OPERA TION Press the POWER ON-OFF button on the top control or on the remote control, and a message "Power off?" appears on the screen. Press the POWER ON-OFF button again to turn off the projector. The LAMP Indicator lights bright and READY Indicator turns off. After projector is turned off, Cooling Fans operate (for 90 seconds ...
-
Sanyo PLV75L/PLV-80L - page 22
22 B ASIC OPERA TION ADJUSTING SCREEN Message disappears after 4 seconds. Message disappears after 4 seconds. ZOOM ADJUSTMENT FOCUS ADJUSTMENT 1 Press ZOOM button on Top Control or ZOOM ▲ / ▼ button on Remote Control Unit. Message “Zoom” is displayed. 2 Press ZOOM ▲ button or POINT UP button to make image larger, and press ZOOM ▼ button ...
-
Sanyo PLV75L/PLV-80L - page 23
23 Press FREEZE button on Remote Control Unit to freeze picture on-screen. To cancel FREEZE function, press FREEZE button again or press any other button. Press NO SHOW button on Remote Control Unit to black out image. To restore to normal, press NO SHOW button again or press any other button. NO SHO W FUNCTION PICTURE FREEZE FUNCTION Message disap ...
-
Sanyo PLV75L/PLV-80L - page 24
24 SELECTING INPUT SOURCE DIRECT OPERA TION Select INPUT source by pressing INPUT button on Top Control or on Remote Control Unit. Select INPUT source by pressing INPUT 1, INPUT 2 or INPUT 3 button on Remote Control Unit. If projector cannot reproduce proper image, select correct input source through MENU OPERATION (see below). INPUT button Input 1 ...
-
Sanyo PLV75L/PLV-80L - page 25
25 COMPUTER INPUT This projector automatically tunes to most different types of computers based on VGA, SVGA, XGA, SXGA, SXGA+, WXGA or UXGA (refer to “COMPATIBLE COMPUTER SPECIFICATION” on pages 52-53). When a computer is selected, this projector automatically tunes to incoming signal and projects the proper image without any special setting. ...
-
Sanyo PLV75L/PLV-80L - page 26
26 COMPUTER INPUT PC ADJUSTMENT AU TO PC ADJUSTMENT Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots and Picture Position to conform to your computer. Auto PC Adjustment function can be operated as follows. Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT buttons to move a red frame point ...
-
Sanyo PLV75L/PLV-80L - page 27
27 COMPUTER INPUT MANU AL PC ADJUSTMENT This projector can automatically tune to display signals from most personal computers currently distributed. However, some computers employ special signal formats which are different from standard ones and may not be tuned by Multi-Scan system of this projector. If this happens, projector cannot reproduce a p ...
-
Sanyo PLV75L/PLV-80L - page 28
28 COMPUTER INPUT Reset Store Closes PC ADJUST MENU. Quit Other icons operates as follows. To store adjustment parameters, move a red frame pointer to Store icon and then press SELECT button. Move a red arrow pointer to any of Mode 1 to 10 that you want to store and then press SELECT button. Reset all adjust parameters on adjustment dialog box to p ...
-
Sanyo PLV75L/PLV-80L - page 29
29 COMPUTER INPUT PICTURE IMA GE SELECT IMA GE LEVEL SELECT (MENU) Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT buttons to move a red frame pointer to IMAGE SELECT Menu icon. 1 2 Press POINT UP/DOWN buttons to move a red frame pointer to level that you want to set and then press SELECT button. IMAGE SELECT MENU Normal pi ...
-
Sanyo PLV75L/PLV-80L - page 30
30 PICTURE SCREEN ADJUSTMENT This projector has a picture screen resize function, which enables you to display desirable image size. Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT buttons to move a red frame pointer to SCREEN Menu icon. When Digital zoom + is selected, ON-SCREEN MENU disappears and message “D. Zoom +” ...
-
Sanyo PLV75L/PLV-80L - page 31
31 When video input signal is connected to Y-Pb/Cb- Pr/Cr jacks, select Y, Pb/Cb, Pr/Cr. Y,Pb/Cb,Pr/Cr SELECTING INPUT SOURCE Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT buttons to move a red frame pointer to INPUT Menu icon. 1 Move a pointer (red arrow) to source and press SELECT button. Source Select Menu (VIDEO) Move ...
-
Sanyo PLV75L/PLV-80L - page 32
32 VIDEO INPUT AV SYSTEM MENU (VIDEO OR S-VIDEO) AV SYSTEM MENU (COMPONENT VIDEO) SELECTING VIDEO SYSTEM Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT buttons to move a red frame pointer to AV SYSTEM Menu icon. Press POINT UP/DOWN buttons to move a red arrow pointer to system that you want to select and then press SELECT ...
-
Sanyo PLV75L/PLV-80L - page 33
33 VIDEO INPUT PICTURE IMA GE SELECT IMA GE LEVEL SELECT (MENU) Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT buttons to move a red frame pointer to IMAGE SELECT Menu icon. 1 2 Press POINT UP/DOWN buttons to move a red frame pointer to level that you want to set and then press SELECT button. IMAGE SELECT MENU Normal pictu ...
-
Sanyo PLV75L/PLV-80L - page 34
34 PICTURE SCREEN ADJUSTMENT This projector has a picture screen resize function, which enables you to display desirable image size. Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT buttons to move a red frame pointer to SCREEN Menu icon. Press POINT DOWN button and move a red frame pointer to function that you want to selec ...
-
Sanyo PLV75L/PLV-80L - page 35
35 Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT buttons to move a red frame pointer to IMAGE ADJUST Menu icon. 1 2 Press POINT UP/DOWN buttons to move a red frame pointer to item that you want to adjust and then press SELECT button. Level of each item is displayed. Adjust each level by pressing POINT LEFT/RIGHT buttons. ...
-
Sanyo PLV75L/PLV-80L - page 36
36 PICTURE IMA GE Auto picture control Press either POINT LEFT button or POINT RIGHT button to Auto picture control position that you want to select . (Off, L1 or L2) Off ······· Auto picture control OFF position. L1 ········ Auto picture control LEVEL 1 position. L2 ········ Auto picture control LEVEL 2 position. To move a r ...
-
Sanyo PLV75L/PLV-80L - page 37
37 Reset all adjustment to previous figure. Reset Store Closes IMAGE ADJUST MENU. Quit Other icons operates as follows. To store manually preset image, move a red frame pointer to Store icon and press SELECT button. Image Level Menu will appear. Move a red frame pointer to Image 1 to 10 where you want to set and then press SELECT button. Press eith ...
-
Sanyo PLV75L/PLV-80L - page 38
38 Keystone Press the MENU button to display the On-Screen Menu. Press the POINT LEFT/RIGHT buttons to move a red frame pointer to the Setting Menu icon. 1 2 Language The language used in the On-Screen Menu is available in English, German, French, Italian, Spanish, Portuguese, Dutch, Swedish, Russian, Chinese, Korean, or Japanese. Set a red frame p ...
-
Sanyo PLV75L/PLV-80L - page 39
39 SETTING Logo Logo settings can be altered as follows: Logo select This function decides what to be displayed on the starting-up dis- play as follows: Off . . . . . . .count-down only Default . . . .the factory-set logo User . . . . . .the image you captured Capture This function enables you to capture the image being projected and use it for a s ...
-
Sanyo PLV75L/PLV-80L - page 40
40 SETTING Ceiling Rear Ceiling When this function is “On,” the picture is top/bottom and left/right reversed. This function is used to project the image from a ceiling mounting the projector. Rear When this function is “On,” the picture is left/right reversed. This function is used to project the image to a rear projection screen. Lamp con ...
-
Sanyo PLV75L/PLV-80L - page 41
41 Remote control This projector provides eight different remote control codes (Code 1-Code 8); the factory-set, initial code (Code 1) and the other seven codes (Code 2 to Code 8). This switching function prevents remote control interference when operating several projectors or video equipment at the same time. For example operating the projector i ...
-
Sanyo PLV75L/PLV-80L - page 42
42 SETTING The PIN code can be changed to your desired four-digit number. Select "PIN code change" with the POINT DOWN button, and press the SELECT button. The New PIN code input dialog box will appear. Select a number with the POINT LEFT/RIGHT buttons and fix the number with the SELECT button. Repeat it to complete entering a four-digit ...
-
Sanyo PLV75L/PLV-80L - page 43
43 SETTING This function is used to reset the lamp replace counter. When replacing the projection lamp, reset the lamp replace counter by using this function. See page 47 for operation. Lamp counter Factory default This function returns all setting values except for the user logo, Key lock, PIN code lock, logo PIN code lock and the lamp counter to ...
-
Sanyo PLV75L/PLV-80L - page 44
44 MAINTENANCE W ARNING TEMP . INDICA T OR Ventilation Slots of a projector may be blocked. In such an event, reposition a projector so that Ventilation Slots are not obstructed. Air Filter may be clogged with dust particles. Clean Air Filter by following section AIR FILTER CARE AND CLEANING on next page. 1 2 If WARNING TEMP. Indicator remains on a ...
-
Sanyo PLV75L/PLV-80L - page 45
45 APPENDIX CLEANING PR OJECTION LENS Apply a non-abrasive camera lens cleaner to a soft, dry cleaning cloth. Avoid using an excessive amount of cleaner. Abrasive cleaners, solvents or other harsh chemicals might scratch a surface. When a projector is not in use, replace Lens Cover. 1 3 Lightly wipe a cleaning cloth over Projection Lens. 2 Follow t ...
-
Sanyo PLV75L/PLV-80L - page 46
46 APPENDIX Turn off a projector and disconnect AC plug. Allow a projector to cool for at least 45 minutes. Loosen 2 screws with a screwdriver and pull out Lamp Assembly by grasping Handle. 1 3 Replace Lamp Assembly with a new one and tighten 2 screws back. Make sure that Lamp Assembly is set properly. Replace Lamp Cover and tighten 2 screws. 4 Loo ...
-
Sanyo PLV75L/PLV-80L - page 47
47 APPENDIX LAMP REPLA CE COUNTER Be sure to reset the Lamp Replace Counter after the Lamp Assembly is replaced. When the Lamp Replace Counter is reset, the LAMP REPLACE Indicator stops lighting. NOTE : Do not reset the Lamp Replace Counter until after the Projection Lamp is replaced. Turn projector on, press MENU button and ON-SCREEN MENU will app ...
-
Sanyo PLV75L/PLV-80L - page 48
48 APPENDIX TR OUBLESHOO TING Before calling your dealer or service center for assistance, check matters below once again. 1. Make sure you have connected a projector to your computer or video equipment as described in section "CONNECTING PROJECTOR" on pages 12 ~ 14. 2. Check cable connection. Verify that all computer, video and power cor ...
-
Sanyo PLV75L/PLV-80L - page 49
49 APPENDIX Remote Control Unit does not work. ● Check batteries. ● Make sure nothing is between Infrared Remote Receiver and Remote Control Unit. ● Make sure you are not too far from a projector when using Remote Control Unit. Maximum operating range is 16.4’ (5m). ● Check remote control code from Remote Control Unit. (See“SETTING” s ...
-
Sanyo PLV75L/PLV-80L - page 50
50 APPENDIX System (1) SVGA 1 SVGA 2 SVGA 3 Auto PC Adj. Fine sync. Total dots Position H Position V Current mode Clamp Display area - H Display area - V Reset Mode free Store Quit Standard Real Image 1 Image 10 Normal Full True D.zoom + D.zoom – 0 - 31 Computer Input PC Adjust Mode 1 Mode 2 Mode 3 Mode 4 Mode 5 Image Select Screen Mode 6 Yes/No ...
-
Sanyo PLV75L/PLV-80L - page 51
51 APPENDIX Auto PAL SECAM NTSC NTSC 4.43 PAL-M PAL-N V ideo Input Auto 1035i 720p 575p 480p 575i 480i Quit Full Zoom 0 - 63 0 - 63 0 - 63 0 - 63 Off/On/Film Volume Language System (3) System (2) Image Adjust Contrast Brightness Color Tint Red Green Blue Sharpness Reset Store Gamma Progressive 0 - 63 0 - 63 0 - 63 0 - 31 0 - 15 Image 1 Image 10 Scr ...
-
Sanyo PLV75L/PLV-80L - page 52
52 APPENDIX COMP A TIBLE COMPUTER SPECIFICA TIONS –––––––– (Interlace) 1024 x 768 (Interlace) ON-SCREEN DISPLAY RESOLUTION H-Freq. (kHz) V-Freq. (Hz) VGA 1 640 x 480 31.47 59.88 VGA 2 720 x 400 31.47 70.09 VGA 3 640 x 400 31.47 70.09 VGA 4 640 x 480 37.86 74.38 VGA 5 640 x 480 37.86 72.81 VGA 6 640 x 480 37.50 75.00 MAC LC13 640 x 4 ...
-
Sanyo PLV75L/PLV-80L - page 53
53 APPENDIX NOTE : Specifications are subject to change without notice. ON-SCREEN DISPLAY RESOLUTION H-Freq. (kHz) V-Freq. (Hz) D-VGA 640 x 480 31.47 59.94 D-480p 720 x 480 ( Progressive ) 31.47 59.88 D-575p 768 x 575 ( Progressive ) 31.25 50.00 D-SVGA 800 x 600 37.879 60.32 D-XGA 1024 x 768 43.363 60.00 ON-SCREEN DISPLAY RESOLUTION H-Freq. (kHz) V ...
-
Sanyo PLV75L/PLV-80L - page 54
54 APPENDIX • • • on • • • dim • • • off • • • flashing ✽ When the life of the projection lamp draws to an end, the LAMP REPLACE indicator lights yellow. When this indicator lights yellow, replace the projection lamp with a new one promptly. Reset the Lamp Replace Counter after replacement of the lamp. The projector is bei ...
-
Sanyo PLV75L/PLV-80L - page 55
55 Owner’s Manual AC Power Cord Wireless/Wired Remote Control Transmitter and Batteries Control Cable for Serial port Lens Cover (PLV-75/PLV-80) PIN Code Label Multi-media Projector Accessories ● Specifications are subject to change without notice. TECHNICAL SPECIFICA TIONS 1.21" TFT Active Matrix type, 3 panels 19.2 lbs (8.7 kg) PLV-75/PL ...
-
Sanyo PLV75L/PLV-80L - page 56
56 APPENDIX This projector is compliant with PJLink Standard Class 1 of JBMIA (Japan Business Machine and Information System Industries Association). This projector supports all commands defined by PJLink Class 1 and is verified conformance with PJLink Standard Class 1. PJLink is a registered trademark of JBMIA. PJ LINK NO TICE SANYO Projector Inpu ...
-
Sanyo PLV75L/PLV-80L - page 57
57 CONFIGURA TIONS OF TERMINALS COMPUTER INPUT-1 TERMINALS (ANALOG) Terminal : HDB15-PIN 5 1 2 3 4 10 9 6 7 8 15 14 13 11 12 Red Input Ground (Horiz.sync.) Green Input Sense 2 Blue Input Ground (Red) Ground (Green) Ground (Blue) 1 5 2 4 3 6 7 8 +5V Power Horiz. sync. Ground (Vert.sync.) DDC Data Sense 0 Vert. sync. DDC Clock 9 13 10 12 11 14 15 Pin ...
-
Sanyo PLV75L/PLV-80L - page 58
58 APPENDIX OPTIONAL P AR TS The parts listed below are optionally supplied. When ordering those parts, give the name and Type No. to the sales dealer. ● DVI Cable Type No. : KA-DV20 ● HDB 15 pin-SCART 21 pin Cable Type No. : POA-CA-SCART ● Long Zoom Lens Type No. : LNS-T31A ● Ultra Long Zoom Lens Type No. : LNS-T32 ● Short Zoom Lens Type ...
-
Sanyo PLV75L/PLV-80L - page 59
59 APPENDIX Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or lost the number and unable to operate the projector, contact the service station. Factory default set No: 1 2 3 4* Factory default set No: 4 3 2 1* *Should the four-digit number be changed, the factory set number will be invalid. P ...
-
Sanyo PLV75L/PLV-80L - page 60
Printed in Japan Part No. 610 324 1739 (1AA6P1P4949-- M4YA) SANY O Electric Co., Ltd ...
У вас вопрос, касающийся Sanyo PLV75L/PLV-80L?
Воспользуйтесь формуляром, находящимся ниже
Если с помощью найденной инструкции Вы не решили свою проблему с Sanyo PLV75L/PLV-80L, задайте вопрос, заполнив следующий формуляр. Если у какого то из пользователей была похожая проблема с Sanyo PLV75L/PLV-80L со всей вероятностью он захочет поделиться методом ее решения.