-
Haier CHLF103Q - page 1
Electric Dryer Sèche -linge Genesis Secadora Eléctrica User Manual Model # HLF103Q/R, GDE700AW , CHLF103Q , CGDE700AW Guide de l’Utilisateur Modéle # HLF103Q/R, GDE700AW , CHLF103Q , CGDE700AW Manual del Usuario Para Modelo de # HLF103Q/R, GDE700AW , CHLF103Q , CGDE700A W Quality • Innovation • Style ...
-
Haier CHLF103Q - page 2
IMPORT ANT SAFETY INSTRUCTIONS WARNING - T o reduce the risk of fire, electric shock, or injury to persons when using your appliance, follow the basic precautions, including the following: 1. Read all of the instructions before using this appliance. 2. Don ’t dry articles that have been previously cleaned in, washed in, soaked in, or spotted with ...
-
Haier CHLF103Q - page 3
2 Thank you for using our Haier product. This easy-to-use manual will guide you in getting the best use of your dryer . Remember to record the model and serial number . They are on a label in back of the dryer . Model number Serial number Date of purchase Staple your receipt to your manual. Y ou will need it to obtain warranty service. 16. This dry ...
-
Haier CHLF103Q - page 4
English 3 T able Of Contents PA G E SAFETY INSTRUCTIONS .................................................................... 1 INST ALLA TION INSTRUCTIONS ................................................ 4-12 T ools and Materials Required ................................................................ 4 Electrical Requirements .................... ...
-
Haier CHLF103Q - page 5
English 4 • Select a suitable location for the dryer on a hard even surface away from direct sunlight or heat sources, baseboard heaters, cooking appliances etc. Any floor unevenness should be corrected with leveling legs located on the bottom of the dryer . T ools and materials required • Phillips head and flathead screwdrivers • Channel-loc ...
-
Haier CHLF103Q - page 6
English 5 Exhaust System Connections 1. Do not use plastic flexible duct to exhaust the dryer . Excessive lint can build up inside exhaust system and create a fire hazard and restrict air flow . Restricted air flow will increase dryer times. If your present system is made up of plastic duct or metal foil duct, replace it with a rigid or flexible me ...
-
Haier CHLF103Q - page 7
English 6 Materials Use only 4 inch (10.2cm) diameter (minimum) rigid of flexible metal duct and approved vent hood which has a swing-out damper hat open when the dryer is in operation. When the dryer stops, the dampers automatically close to prevent drafts and the entrance of insects and rodents. T o avoid restricting the outlet, maintain a minimu ...
-
Haier CHLF103Q - page 8
English 7 Location of Y our Dryer Do Not Install Y our Dryer: • In an area exposed to dripping water or outside weather conditions. • In an area where it will come in contact with curtains, thick carpet,or any thing that will obstruct the flow of combustion and ventilation air . • On carpet floor must be solid with a maximum slope of 1inch (2 ...
-
Haier CHLF103Q - page 9
English 8 ...
-
Haier CHLF103Q - page 10
English 9 Electrical Connections Requirements and Instructions The following are specific requirements for proper and safe electrical installation of your dryer . Failure to follow these instructions can create electrical shock and/or fire hazard. W ARNING 1. This appliance must be properly grounded. Electrical shock can result if the dryer is not ...
-
Haier CHLF103Q - page 11
English 10 3- W ire Cord Connections (USA only) 1. Remove the screws securing the terminal block access cover and the strain relief mounting bracket located on the back of the dryer upper corner . 2. Install a U .L . approved strain relief into the power cord entry hole of the mounting bracket. Finger tighten the nut only at this time. 3. Thread a ...
-
Haier CHLF103Q - page 12
English 11 4- W ire Cord Connections 1. Remove the screws securing the terminal block access cover and the strain relief mounting bracket located on the back of the dryer upper corner . 2. Install a UL approved strain relief into the power cord entry hole of the mounting bracket . Finger tighten the nut only at this time. 3. Remove the green neutra ...
-
Haier CHLF103Q - page 13
English 12 4. Thread a U .L. approved 30 Amp power cord. NEMA 14-30 type ST or SRDT through the strain relief . 5. Attach the green power cord ground wire to the cabinet with green ground screw . 6. Attach the white (neutral) power cord conductors to the outer cord and the green ground wire from the dryer harness to the brass- colored center termin ...
-
Haier CHLF103Q - page 14
English 13 OPERA TING INSTRUCTIONS Understanding the Control Panel Note: Features may vary per model. Start/Pause Button: (1) • P ress the button to turn the dryer ON . P ress this button once to start the dry process. Press this button once again to pause the activity during the dry cycle. Off Button: (2) • Press the button to turn on drayer o ...
-
Haier CHLF103Q - page 15
English 14 More Time & Less Time Button: (7) • Set time from 0 to 180 minutes when Timed Dry or Rack Dry cycle selected. Timed-Dry Cycles Button: (8) • "Timed-Dry Cycles" button will let you select your desired dry mode. Timed Dry: Y ou can set status of "T emp", "Signal" and dry time with "More Time" ...
-
Haier CHLF103Q - page 16
English 15 PREP ARA TIONS BEFORE DRYING • Sort the clothes of the same kind (cotton, synthetics, woolen) to dry . • Dark and light colored clothes should be separately dried. F abrics prone to losing lint and those prone to adhering lint shall be separately dried. Clothes prone to falling lint should be turned inside out before putting into the ...
-
Haier CHLF103Q - page 17
English 16 • The appropriate load shall be 1/3 ~ 1/2 of the drum volume. Avoid too much load, space is needed to allow clothes free rotation for uniform and wrinkle proof drying. • When drying big articles, only 2-3 pieces shall be loaded at a time and supplemented with small and medium sized articles. • F or delicate clothes or less load, tw ...
-
Haier CHLF103Q - page 18
English 17 2. Press "Auto-Dry Cycles" button to select a suitable full automatic cycle. • The Normal program will be automatically selected after powering on. If another full automatic program is desired, press "Auto-Dry Cycles" button until corresponding indicator turns on. • T o select your desired settings the "Custo ...
-
Haier CHLF103Q - page 19
18 F rançais 4. Press "T emp" button to set a suitable drying temperature. • After switching on, the dryer sets corresponding temperature adapting to different program selected. If other drying temperature is wanted, press "T emp" button to enable such a selection. 5. Press "Signal" button, a buzzer will sound upon ...
-
Haier CHLF103Q - page 20
19 F rançais TIMED DRY CYCLE 1. Press any button except "Off" button to power on. 2. Press "Timed-Dry Cycles" button and select "Timed Dry" cycle. • After powering on, press "Timed-Dry Cycle" button to select "Timed Dry" program. 3. Press "More Time" And "L ess Time" buttons t ...
-
Haier CHLF103Q - page 21
20 F rançais RACK DRY CYCLE 1. Press any button except "Off" button to power on. 2. Press "Timed-Dry Cycles" button and select "Rack Dry" cycle. • After powering on, press "Timed-Dry Cycle" button to select "Rack Dry" program. 3. P ress "More Time" And "Less Time" buttons to s ...
-
Haier CHLF103Q - page 22
21 The following sounds are normal during the operation of the dryer . • T umbling sound: this is normal as the heavy wet clothes in the dryer are continuously being tossed around. • Air rushing noise: this happens as the dryer drum spins at very high RPM and the air is rushing through the dryer drum. Tips • F or best drying results, clean th ...
-
Haier CHLF103Q - page 23
22 TROUBLE SHOO TING Dryer does not operate: • Check if unit is plugged in. The plug may have come loose. • Check if the electrical wall receptacle is of proper voltage. • Check if the circuit breaker needs to be reset or if the fuse needs to be replaced. • Check if the unit is in the “off ” model. Press start button again. • Check if ...
-
Haier CHLF103Q - page 24
LIMITED W ARRANTY Full ONE Y ear W arranty F or 12 months from the date of original retail purchase, Haier will repair or replace any part free of charge including labor that fails due to a defect in materials or workmanship. Limited W arranty After only year from the original retail pur- chase date Haier shall provide a part at no cost , as indica ...
-
Haier CHLF103Q - page 25
Made in China Fabriqué en Chine Hecho en China Haier America New Y ork, NY 10018 Printed in China HLF103Q Issued: JUL Y 2006 IMPORT ANT Do Not Return This Product T o The Store I f you have a problem with this product, please contact the "Haier Customer Satisfaction Center" at 1-877-337-3639. DA TED PROOF OF PURCHASE REQUIRED FOR W ARRAN ...
У вас вопрос, касающийся Haier CHLF103Q?
Воспользуйтесь формуляром, находящимся ниже
Если с помощью найденной инструкции Вы не решили свою проблему с Haier CHLF103Q, задайте вопрос, заполнив следующий формуляр. Если у какого то из пользователей была похожая проблема с Haier CHLF103Q со всей вероятностью он захочет поделиться методом ее решения.