-
Oricom BB100 - page 1
Oricom BB100 DECT CORDLESS Telephone User Guide Keep this user guide for future reference ...
-
Oricom BB100 - page 2
- 2 - Contents Safety In formation ........................................................................................................ 4 Unpacking your Oricom BB100 .................................................................................. 4 Handset and Base unit.......................................................................... ...
-
Oricom BB100 - page 3
- 3 - ADVANCED FE ATURES ............................................................................................. 20 Programming .................................................................................................................... ............................ 20 Change PIN Code ................................................... ...
-
Oricom BB100 - page 4
- 4 - Safety Information • Avoid exposure of this telephone to moisture or liquid. • To prevent electric shock, do not open the handset or base cabinet. • Avoid metallic contact (e.g. metal clips, keys) between the battery contacts and charging conductors. • Do not use the handset in an explosive hazard area such as where there is gas leaki ...
-
Oricom BB100 - page 5
- 5 - Handset and Base unit 1. Receiver 2. LCD display 3. PHONEBOOK button - Use to access phonebook. 4. TALK button - Press to make/receive/end external calls. - To escape from programming 5. Up button - To enter the redial list in standby mode - Long press to enter a pause in the dialling sequence - To adjust earpiece volume during a call - To sc ...
-
Oricom BB100 - page 6
- 6 - LCD Layout ICON NAME DESCRIPTION Battery Animated when charging Fully charged Half charged Very Low In Use (Talk) indicator Remain steady when the phone is in use (i.e. when an internal or external call is in progress). Calling External External call in progress. External Call Blinking - There is an external incoming call. Steady – Line is ...
-
Oricom BB100 - page 7
- 7 - Selecting a site for the Base unit The phone base unit should be installed where the mains adaptor plug will reach the power socket and, the telephone cable will reach your telephone socket and not to close to other electrical equipment (such as washing machines, microwaves, TV, fluorescent lights, etc. 1. Make sure the telephone line is not ...
-
Oricom BB100 - page 8
- 8 - Standby mode When the handset is not in use is in the standby mode. The LCD will display: Where: 1: Handset assigned number BB100: Handset name 10:37: Time of the day ( 10 AM, 37 minutes) (ex : 23:37 : 11 PM, 37 minutes) Note: If power is disconnected from your phone , the clock will be inaccurate. When the power is restored, it will be autom ...
-
Oricom BB100 - page 9
- 9 - 1) Press ‘TALK’ button to answer the call. 2) To end the call, either press TALK button or place the handset back on the base. Re-dialing The last 10 dialled external numbers are stored for redialling (in the re-di al list). The number can consist of up to 25 digits. The user can select any number on the r edial list to redial in pre- dia ...
-
Oricom BB100 - page 10
- 10 - Page function If you lose or misplace your handset you can press the ‘Page’ on base to relocate it. Press the Page button on the base. The paged handset will ring. The In Use LED on the base will flash and icon will blink in the LCD screen of handset. To stop paging, press the PAGE button on the base again, or press any key on the handse ...
-
Oricom BB100 - page 11
- 11 - 5. Press OK button to confirm. is displayed. 6. Input phone number (max. 25 digits) from keypad. 7. Press OK button to confirm. is displayed again 8. To add another phone book entry, follow steps above. 9. To exit, press the TALK button to go back to the standby mode. Reviewing the phonebook a. T o access phonebook via ‘Menu’ option: 1. ...
-
Oricom BB100 - page 12
- 12 - Editing an entry in the phone book * You can amend the name and number of any entry stored in your phonebook: 1. Press OK button. is displayed. 2. Press OK button. is displayed. 3. Press DOWN button to scroll to the option . 4. Press OK button. The name of first phone book entry is displayed. 5. or Use the UP and DOWN button to scroll throug ...
-
Oricom BB100 - page 13
- 13 - CALLER ID (CID) If you subscribe to Caller ID (charges may apply) to your telephone service providers Caller ID service, numbers of the incoming calls will be displayed on the screen and stored in the call lo g. (Please consult your telephone service provider for details about the service) Call Screening With CID service implemented on your ...
-
Oricom BB100 - page 14
- 14 - display first. If your telephone service provides the number only, the number will be displayed (without name). 3. If the name is displayed first, press OK button to see the number. 4. If the number consists of more than 12 digits, the Æ symbol is turned on and the first 12 digits of the number are displayed. Press OK button to display the ...
-
Oricom BB100 - page 15
- 15 - 3) Press OK to view the number if the name is displayed first. Press OK again to see the remaining digits, if t he number consists of more than 12 digits). 4) Press OK again to show repeat times of the call if the number is displayed first. 5) Press OK again to display the date and time of the call. 6) Press OK again. ‘ ?’ will appear on ...
-
Oricom BB100 - page 16
- 16 - 2. P ress DOWN button. is displayed. 3. Press OK button. 4. Use DOWN button to scroll to the option , to set a ringer melody for external calls. Or, to scroll to the option INT MELODY, to set a ringer melody for internal calls. 5. Press OK button. The LCD shows ‘ : X’ (X= one number of 8 melodies) and you will hear a sample melody. 6 . o ...
-
Oricom BB100 - page 17
- 17 - 8. Press and hold CANCEL to exit to standby mode, or 9. Press the TALK button to go back to the standby mode. Setting Base Ringer Volume: 1. Press OK button. ‘ ’ is displayed. 2. Use DOWN button to scroll to . 3. Press OK button, is displayed. 4. Press OK button. The LCD shows ‘ : X’ (X= one of 5 volume levels) or and you will hear a ...
-
Oricom BB100 - page 18
- 18 - 4) Press OK button again. is displayed. 5) Press OK button again. or is displayed. 6) or Use UP or DOWN to select ON or OFF setting. 7) Press OK button to confirm the setting. 8) Press CANCEL and hold to exit to standby, or 9) Press the TALK button to go back to the sta ndby mode. Low battery 1) Press OK button. is displayed. 2) Press DOWN b ...
-
Oricom BB100 - page 19
- 19 - 2. Press DOWN button. is displayed. 3. Press OK button. 4. Use DOWN button to scroll to the option . 5. Press OK button. 6. Enter your desired handset name from the keypad (max 5 characters). 7. Press OK button to confirm the name. 8. Press and hold CANCEL to exit to standby mode, or 9. Press the TALK button to go back to the standby mode. L ...
-
Oricom BB100 - page 20
- 20 - Switching your handset On or Off - Press and hold the CANCEL button, you can power off the handset. - - To power on the handset again, just press CANCEL button. Auto Answering When the Auto Answer function is activated, you are able to answer a call by lifting the handset out of the base cradle without having to press the TALK key. To Set th ...
-
Oricom BB100 - page 21
- 21 - 6. Enter the old 4 digits PIN number from the numeric keypad (Default PIN code is 0000). 7. Press OK button. The display shows . 8. Enter new PIN number (max. 8 digits) from the numeric keypad. 9. Press OK button to confirm. The LCD shows . 10. Use numeric keypad to re-enter the new PIN. 11. Press OK to confirm and exit to . 12 Press and hol ...
-
Oricom BB100 - page 22
- 22 - Reset to factory default settings This feature will restore the factory default settings of your phone. All pr ogramming earlier done like setting the ringing volume, ringing melody, external call melody, clear the phonebook, clear the LNR, etc. will be erased. 1. Press OK button. ‘ ’ is displayed. 2. Use DOWN button to scroll to . 3. Pr ...
-
Oricom BB100 - page 23
- 23 - TROUBLESHOOTING GUIDE Problem Possible Cause Action Taken Programming Display NOT AVAIL RF Interference occurs during programming. Retry the programming; if possible move closer near the phone base station. Interference during communications Out of range or close to other electrical appliances Check the handset is not emitting the out of ran ...
-
Oricom BB100 - page 24
- 24 - Notes for operation in New Zealand The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item complies with the minimum conditions for connection to its network. It indicates no endorsement of the product by Telecom, nor does it provide any sort of warranty. Above all, it provides no a ...
-
Oricom BB100 - page 25
- 25 - Warranty Information This product is covered by a 12 month warranty against defective workmanship or parts. The warranty does not extend to damage caused by misuse, negligence, water ingress, excessive voltage, telephone line faults or lightning. This guarantee in no way affects your statutory rights. Full details of the warranty are contain ...
У вас вопрос, касающийся Oricom BB100?
Воспользуйтесь формуляром, находящимся ниже
Если с помощью найденной инструкции Вы не решили свою проблему с Oricom BB100, задайте вопрос, заполнив следующий формуляр. Если у какого то из пользователей была похожая проблема с Oricom BB100 со всей вероятностью он захочет поделиться методом ее решения.