-
Multi-Tech Systems S000573A - page 1
Using the Router’s Web Interface 1 MultiConnect rCell Router Using the Router’s Web Interface ...
-
Multi-Tech Systems S000573A - page 2
Using the Router’s Web Interface 2 MultiConnect® rCell User’s Guide Intelligent Wireless Router S000573A, Revision A Copyright This publication may not be reproduced, in whole or in part, without prior express ...
-
Multi-Tech Systems S000573A - page 3
Using the Router’s Web Interface 3 Table of Contents Welcome ............................................................................................................................... ......................................... 6 Getting started ........................... ...
-
Multi-Tech Systems S000573A - page 4
Using the Router’s Web Interface 4 Advanced Settings ............................................................................................................................... ............... 23 Setting up static routes ................................................... ...
-
Multi-Tech Systems S000573A - page 5
Using the Router’s Web Interface 5 Saving and restoring settings ............................................................................................................................... ... 36 Setting up the router's debug options ................. ...
-
Multi-Tech Systems S000573A - page 6
Using the Router’s Web Interface 6 Welcome This help file provides information on configuring, managing, and updating your MultiConnect® rCell 100 Series router. Your router incl udes a Web Management I nterface ...
-
Multi-Tech Systems S000573A - page 7
Using the Router’s Web Interface 7 Setting up your device The initial setup wizard can help you set up your device quickly with information that is commonly needed to operate the router. To use ...
-
Multi-Tech Systems S000573A - page 8
Using the Router’s Web Interface 8 a. To use PPP, check Enable . When enabled, your device functions as a router. b. To enable the dial ‐ on ‐ deman d feature, check Dial ‐ on ‐ Demand . To configure the sett ...
-
Multi-Tech Systems S000573A - page 9
Using the Router’s Web Interface 9 Configuring miscellaneous features for your device Configuring IP address and DNS information for LANs Your router manag es traffic for your local area networks (LANs). To c ...
-
Multi-Tech Systems S000573A - page 10
Using the Router’s Web Interface 10 Configuring Dynamic Domain Naming System (DDNS) This feature allows your router to use a DD NS service to associate a hosted server's domain name with a dynamicall ...
-
Multi-Tech Systems S000573A - page 11
Using the Router’s Web Interface 11 Configuring the DHCP server Configuring a Dynamic Host Configuration Protocol (DHCP) Server You can configure yo ur router to function as a DHCP server that s upplies ne ...
-
Multi-Tech Systems S000573A - page 12
Using the Router’s Web Interface 12 Assigning fixed addresses You must let your router know about devices with fixed IP addresses. To do so, yo u manually enter the device's MAC address and the ? ...
-
Multi-Tech Systems S000573A - page 13
Using the Router’s Web Interface 13 3. To allow your router to co nnect and send GPS data to a remotely located server, see Sending GPS information to a remote server. 4. To set the time interval ...
-
Multi-Tech Systems S000573A - page 14
Using the Router’s Web Interface 14 Configuring which NMEA sentences are sent and when they are sent To configure the time interval, additional prefix or ID information, and which NMEA sentenc es th at ...
-
Multi-Tech Systems S000573A - page 15
Using the Router’s Web Interface 15 Setting the device's date and time You can configure how your router manages the setting of time on its domain of systems. The system date and time display ...
-
Multi-Tech Systems S000573A - page 16
Using the Router’s Web Interface 16 4. In the Subnet Mask field, type the network mask. Editing or deleting an exis ting network 1. To delete a network, click Delete . 2. At the top of the pane, a ...
-
Multi-Tech Systems S000573A - page 17
Using the Router’s Web Interface 17 Setting up wireless features Setting up Wi ‐ Fi access points Your router can be co nfigured as a wireless access point (AP) to allow Wi ‐ Fi enabled devices to con ...
-
Multi-Tech Systems S000573A - page 18
Using the Router’s Web Interface 18 8. In the DTIM Interval field, type how often a bea con frame includes a Delivery Traffic Indication Message, and this number is included in each beacon frame. It ? ...
-
Multi-Tech Systems S000573A - page 19
Using the Router’s Web Interface 19 Setting up Wi ‐ Fi client As an alternative to functio ning as a Wi ‐ Fi Access Point, yo ur router can f unction as a Wi ‐ Fi Client. 1. From Wireless, select ...
-
Multi-Tech Systems S000573A - page 20
Using the Router’s Web Interface 20 2. Confirm that the far ‐ end Bluetooth device is powered on and waiting for a conne ction. 3. In the Available Devices grou p, click Refresh . A list of detec ...
-
Multi-Tech Systems S000573A - page 21
Using the Router’s Web Interface 21 To configure the IP Pipe in TCP/U DP Client mode : 1. In the IP Pipe gr oup, from the Mode drop ‐ down list, select CLIENT . 2. From the Protocol drop ‐ down list, ...
-
Multi-Tech Systems S000573A - page 22
Using the Router’s Web Interface 22 Setting up firewalls Defining firewall rules The router's firewall enforces a set of rules tha t determine how incoming and outgoing pac kets are handled. By defau ...
-
Multi-Tech Systems S000573A - page 23
Using the Router’s Web Interface 23 8. In the Source Port field, type the port that is the origin of the traffic. Type ANY if the source port does not matter. 9. From the Action drop ‐ down list ...
-
Multi-Tech Systems S000573A - page 24
Using the Router’s Web Interface 24 Setting up cellular features PPP configuration Configuring Point ‐ to ‐ Point (PPP) To configure how the PPP protocol is used on your router: 1. From Cellular, select PPP ? ...
-
Multi-Tech Systems S000573A - page 25
Using the Router’s Web Interface 25 8. In the Dialing Max Retries fi eld, type the number of dialing retries allowed. The default is zero, which means an infinite number is allowed. The range is 0 ...
-
Multi-Tech Systems S000573A - page 26
Using the Router’s Web Interface 26 6. In the ICMP Co unt field, type the number of ICMP keepalive che cks to be sent to the specified host. Default is 10. Configuring PPP: Sending modem commands ...
-
Multi-Tech Systems S000573A - page 27
Using the Router’s Web Interface 27 Configure wake ‐ up on call. Define the settings or events that occu r in order to wake up the router. Example 1 – Determine if the router supports incom ...
-
Multi-Tech Systems S000573A - page 28
Using the Router’s Web Interface 28 Check Wakeup ‐ on ‐ Call. Set the Time Delay to 3 seconds. You can use the 10 second default. Ensure that all Init Strings fields are empty. Submit ...
-
Multi-Tech Systems S000573A - page 29
Using the Router’s Web Interface 29 Click Add to save each Caller ID as it is entere d to the Caller ID list. 3. After you complete all your changes, save and restart. The device saves all ...
-
Multi-Tech Systems S000573A - page 30
Using the Router’s Web Interface 30 Setting up Caller Acknowledgement 1. In the group, in the field, type a configured string (0 to 40 characters) that is sent to the integrated cellular modem upon ? ...
-
Multi-Tech Systems S000573A - page 31
Using the Router’s Web Interface 31 Defining tunnels to your device Setting up Generic Routing Encapsulation (GRE) tunnels Tunneling allows the use of a public network to convey data on behalf of two ...
-
Multi-Tech Systems S000573A - page 32
Using the Router’s Web Interface 32 Defining Virtual Private Networks (VPNs) Your router supports VPN t unnels for secure LAN ‐ to ‐ LAN access. To set up a VPN through your ro uter: 1. From the navigatio ...
-
Multi-Tech Systems S000573A - page 33
Using the Router’s Web Interface 33 Administering devices Configuring how routers access the Internet You must define how your router accesses the Internet and how the router can protect the networks and ...
-
Multi-Tech Systems S000573A - page 34
Using the Router’s Web Interface 34 Defining When the Device Connects to Remote Server 1. If you want the device to connect to the Remote Management Server only when the device's PPP link is ...
-
Multi-Tech Systems S000573A - page 35
Using the Router’s Web Interface 35 Specifying Device Settings To define other custom settings for devices: 1. In the Device Name field, type a name to identi fy the device. 2. In the Custom ID field, ...
-
Multi-Tech Systems S000573A - page 36
Using the Router’s Web Interface 36 Saving and restoring settings To restore previous configuration settings to yo ur router, to restore settings to their factory defaults or to save the current configura tio ...
-
Multi-Tech Systems S000573A - page 37
Using the Router’s Web Interface 37 Setting up the router's debug options You can set up your device to automatically reboot itself. You can also set up the device to recor d and repo rt Syslog ? ...
-
Multi-Tech Systems S000573A - page 38
Using the Router’s Web Interface 38 Checking the status of devices Viewing device statistics 1. From Status , select Statistics . 2. The application categorizes statistics about your device. To see statistics that ...
У вас вопрос, касающийся Multi-Tech Systems S000573A?
Воспользуйтесь формуляром, находящимся ниже
Если с помощью найденной инструкции Вы не решили свою проблему с Multi-Tech Systems S000573A, задайте вопрос, заполнив следующий формуляр. Если у какого то из пользователей была похожая проблема с Multi-Tech Systems S000573A со всей вероятностью он захочет поделиться методом ее решения.