-
Boston Acoustics SPZ50 - page 1
...
-
Boston Acoustics SPZ50 - page 2
Index Introduction Page 2 Specifications Page 3 Dimensions Page 4 Included Parts and Accessories Page 6 T weeter Installation Page 8 Axis Mount / Phase Plug Installation Page 10 SPZ50 W oofer Installation Page 12 SPZ60 W oofer Installation Page 13 Connecting Speaker Wires to the W oofer Page 16 SPZ Axis Mount Positioning Page 17 Crossover Installat ...
-
Boston Acoustics SPZ50 - page 3
Introduction Thank you for purchasing the Boston Acoustics SPZ component system. Nothing better describes SPZ components than best-in-class. With nearly 1-inch of peak-to-peak excursion, SPZ delivers more bass from a standard size speaker opening. Further , Our off-axis, free rotating tweeter AMD ™ allows you to optimize the soundstage from OEM s ...
-
Boston Acoustics SPZ50 - page 4
3 Specifications Model: SPZ60 SPZ50 Nominal Size: 6 1 ⁄ 2 " (165mm) 5 1 ⁄ 4 " (135mm) RMS Power Handling: 150w 150w Max Power Handling: 300w 300w Nominal System Impedance: 3 Ω 3 Ω W oofer Cutout Diameter: 5" (127mm) 4 3 ⁄ 4 " (120mm) W oofer Mounting Depth: 2 11 ⁄ 16 " (68mm) 2 9 ⁄ 16 " (62mm) Surface Mou ...
-
Boston Acoustics SPZ50 - page 5
SPZ50 Woofer 92.1mm 3.62” 61.9mm 2.54” 36mm 1.42” 119mm 4.69” 36mm 1.42” 67.4mm 2.65” 97.6mm 3.84” 134mm 5.27” SPZ60 Woofer 4 Dimensions ...
-
Boston Acoustics SPZ50 - page 6
Dimensions 5 110mm 4.33” 197mm 7.75” 56.1mm 2.21” SPZ Crossover SPZ T weeter 1 8mm .71” 27mm 1.1” 43mm 1.69” 52mm 2.05” 38mm 1.5” 51mm 2” ...
-
Boston Acoustics SPZ50 - page 7
SPZ60 Included Parts and Accessories: 6 # Description Quantity 1 SPZ60 Woofer 2 2 T ype-M1 1" Alloy Dome T weeter 2 3 SPZ60 Crossover 2 4 T weeter Grille 2 5 T weeter Axis-Mount 2 6 T weeter Flush-Mount 2 7 T weeter Angle-Mount (top) 2 8 T weeter Angle-Mount (bottom) 2 9 Woofer Gasket 4 10 Boston Hex T ool 1 11 Woofer Grille 2 12 Woofer Grille ...
-
Boston Acoustics SPZ50 - page 8
SPZ50 Included Parts and Accessories: 7 # Description Quantity 1 SPZ50 Woofer 2 2 T ype-M1 1" Alloy Dome T weeter 2 3 SPZ50 Crossover 2 4 T weeter Grille 2 5 T weeter Axis-Mount 2 6 T weeter Flush-Mount 2 7 T weeter Angle-Mount (top) 2 8 T weeter Angle-Mount (bottom) 2 9 Woofer Gasket 4 10 Boston Hex T ool 1 11 Woofer Grille 2 12 Woofer Grille ...
-
Boston Acoustics SPZ50 - page 9
8 T weeter Installation: Flush Mount 19 18 17 6 2 4 1) Drill a hole for the tweeter cup (1 3 ⁄ 4 ”/ 45mm) making sure that there is adequate depth available ( 3 ⁄ 4 ”/ 19mm). 2) Connect the speaker wires to the tweeter cup . 3) Insert the tweeter cup into the mounting hole. 4) Insert the retaining clips and set screw and tighten. 5) Insert ...
-
Boston Acoustics SPZ50 - page 10
T weeter Installation: Angle Mount 18 21 7 22 8 2 4 19 18 17 6 2 4 1) Drill a hole for the speaker wire and pre-drill for the mounting screws if necessary 2) Mount the bottom cup to the mounting surface using the provided screws routing the speaker wires through the center hole. 3) Attach the speaker wires to the top cup and mount it to the bottom ...
-
Boston Acoustics SPZ50 - page 11
10 SPZ W oofer Axis Mount Installation: 10 4 2 27 5 1 1) Insert the axis mount into the woofer . 2) Insert and hand-tighten the retaining screw with the provided tool . 3) Insert the tweeter into the axis mount , twist clockwise to lock the tweeter into position. ( Caution: Do not touch the dome of the tweeter , contact with the tweeter dome will d ...
-
Boston Acoustics SPZ50 - page 12
SPZ W oofer Phase Plug Installation: 10 27 26 1 1) Insert the phase plug into the woofer . 2) Insert and hand-tighten the retaining screw using the provided tool . 10 27 1 26 11 ...
-
Boston Acoustics SPZ50 - page 13
SPZ50 W oofer Installation: 9 1 32 11 12 13 14 1) Install the gaskets on the mounting flange of the woofer and the back side of the 5 1 ⁄ 4 ” (135mm) adapter ring . 2) Mount the speaker into the speaker location using the provided screws . 3) Position the axis mount into the desired location (if applicable), refer to page 17. Grille Installatio ...
-
Boston Acoustics SPZ50 - page 14
13 SPZ60 W oofer Installation with Grille: 9 9 1 29 9 11 12 2 1 14 13 1) Install the gaskets on the mounting flange of the woofer and the back side of the 6” (160mm) adapter ring . 2) Mount the speaker into the speaker location using the provided screws . 3) Position the axis mount into the desired location (if applicable), refer to page 17. Gril ...
-
Boston Acoustics SPZ50 - page 15
9 9 1 1 29 9 31 3 9 30 9 11 12 23 2 16 15 14 13 14 SPZ60 W oofer Installation with 6 1 ⁄ 2 ” (165mm) V ariMount ™ Adapter Rings: 1) Install the gaskets on the mounting flange of the woofer and the back side of the 1 ⁄ 2 ” (13mm) spacer ring (if applicable). 2) Mount the speaker on to the 6 1 ⁄ 2 ” (165mm) V ariMount ™ plate using th ...
-
Boston Acoustics SPZ50 - page 16
SPZ60 W oofer Installation with 5 x 7” V ariMount ™ Adapter Rings: 15 9 9 1 1 1 29 9 31 31 9 30 9 28 11 12 23 23 16 15 15 16 20 1 1) Install the gaskets on the mounting flange of the woofer and the back side of the 1 ⁄ 2 ” (13mm) spacer ring (if applicable). 2) Mount the speaker on to the 5 x 7” V ariMount ™ plate using the provided scr ...
-
Boston Acoustics SPZ50 - page 17
16 Connecting Speaker Wires: 10 10 1) Strip 1 ⁄ 4 ” (10mm) of shield off of the speaker wires. 2) Insert the wire into the speaker terminal observing proper polarity . 3) Hand-tighten the gold set screws using the provided tool (2.5mm). ( Note: do not overtighten the set screws.) 10 ...
-
Boston Acoustics SPZ50 - page 18
17 SPZ Axis Mount Positioning: 10 The axis mount on the SPZ woofer is designed so it can be positioned to properly direct the tweeter’ s output towards the listening position. 1) Loosen the retaining screw located on the face of the axis mount with the provided tool (2.5mm). T urn the screw at least three full rotations counter -clockwise. 2) Pos ...
-
Boston Acoustics SPZ50 - page 19
10 25 24 Crossover Installation: 20 1) Remove the four screws and located at each corner of the top panel. 2) Once the screws are removed, the cover will lift off the chassis. 3) Using the provided screws , secure the crossover to a solid surface. Note; Due to shock and vibration, the crossovers should not be installed in the doors of the vehicle. ...
-
Boston Acoustics SPZ50 - page 20
19 Crossover Configuration: Axis / Comp Mount Switch: The “Axis/Comp” switch optimizes the output from the crossover for the configuration of the component system. Use the “Axis” setting if the tweeter is installed in the axis mount, use the “Comp” setting if the tweeter is installed separate from the woofer . SQ1 / SQ2 Switch: The “S ...
-
Boston Acoustics SPZ50 - page 21
SPZ System Wiring (Standard): Standard Wiring (Coaxial Configuration) Standard Wiring (Component Configuration) 20 ...
-
Boston Acoustics SPZ50 - page 22
SPZ System Wiring (Bi-Amplification / Bi-Wiring): Bi-Amplification Bi-Wiring 21 ...
-
Boston Acoustics SPZ50 - page 23
Contact Information Contacting Boston For questions regarding installation or service, please contact the dealer from whom you have purchased the product or contact us directly at: Boston Acoustics, Inc. 300 Jubilee Drive Peabody , MA 01960 Phone #: 978-538-5000 Fax #: 978-538-5100 Email: support@bostona.com AMD, T winStage, and VariMount ar e trad ...
-
Boston Acoustics SPZ50 - page 24
23 Notes: ...
-
Boston Acoustics SPZ50 - page 25
24 ...
-
Boston Acoustics SPZ50 - page 26
Boston Acoustics, Inc. 300 Jubilee Drive, Peabody , MA 01960 USA T : 978.538.5000 F: 978.538.5100 W: bostonacoustics.com 042-002423-0 ...
У вас вопрос, касающийся Boston Acoustics SPZ50?
Воспользуйтесь формуляром, находящимся ниже
Если с помощью найденной инструкции Вы не решили свою проблему с Boston Acoustics SPZ50, задайте вопрос, заполнив следующий формуляр. Если у какого то из пользователей была похожая проблема с Boston Acoustics SPZ50 со всей вероятностью он захочет поделиться методом ее решения.