Bedienungsanleitung Delta 50-850

13 Seiten 0.39 mb
Download

Zur Seite of 13

Summary
  • Delta 50-850 - page 1

    INSTRUCTION MANUAL 1½ H.P . Single-Stage Dust Collector (Model 50-850) P ART NO. 902115 - 11-15-02 Copyright © 2002 Delta Machinery ESP AÑOL: PÁGINA 15 T o learn more about DEL T A MACHINER Y visit our website at: www .deltamachinery .com. For Parts, Service, W arranty or other Assistance, please call 1-800-223-7278 ( In Canada call 1-800-463-3 ...

  • Delta 50-850 - page 2

    2 GENERAL SAFETY RULES W oodworking can be dangerous if safe and pr oper operating procedur es ar e not followed. As with all machinery , ther e are certain hazar ds involved with the operation of the pr oduct. Using the machine with respect and caution will considerably lessen the possibility of personal injury . However , if normal safety precaut ...

  • Delta 50-850 - page 3

    3 ADDITIONAL SAFETY RULES FOR DUST COLLECTORS WARNING: F AILURE TO FOLLOW THESE RULES MA Y RESUL T IN SERIOUS PERSONAL INJUR Y . 1. DO NOT OPERA TE THIS MACHINE until it is assembled and installed according to the instructions. 2. OBT AIN ADVICE FROM YOUR SUPERVISOR, instructor , or another qualified person if you are not familiar with the operatio ...

  • Delta 50-850 - page 4

    4 UNP ACKING AND CLEANING Carefully unpack the tool and all loose items fr om the shipping container(s). Remove the pr otective coating from all unpainted surfaces. This coating may be removed with a soft cloth moistened wi th ke r osene (do not use acetone, gasoline or lacquer thinner for this purpose). After cleaning, cover the unpainted surfaces ...

  • Delta 50-850 - page 5

    5 ASSEMBL Y Fig. 4 Fig. 5 Fig. 6 Fig. 8 Fig. 7 ASSEMBLING CASTERS TO BASE 1. Insert threaded r od of caster (A) Fig. 4, into the hole located on the underside of base (B) and fasten with 3/8" lockwasher (C) and 3/8-16 hex nut (D). Fig. 5, illustrates the caster fastened to the base. 2. Assemble the remaining thr ee casters to the underside of ...

  • Delta 50-850 - page 6

    6 Fig. 9 Fig. 10 Fig. 13 Fig. 12 4. Assemble the remaining drum supports (F) Fig. 9, to base (A) as shown. 5. Assemble “U” bracket (H) Fig. 10, to drum (J). Place a 5/16" flat washer then a 5/16" lockwasher onto a 5/16- 18x5/8" hex head screw . Insert the hex head screw (K) thru the hole in the “U” bracket and the hole in the ...

  • Delta 50-850 - page 7

    7 Fig. 15 Fig. 16 Fig. 17 9. Attach the lower dust bag r etaining clip (A) Fig. 14A, to the dust collector drum. Align the two holes (B) in the retaining clip (A) Fig. 14A, with the two holes in the drum. Insert a 1/4-20x5/8" hex head screw thr ough the holes in the retaining clip and the holes in the drum. Place a 1/4" flat washer onto t ...

  • Delta 50-850 - page 8

    8 Fig. 18 Fig. 19 Fig. 22 Fig. 20 Fig. 21 ASSEMBLING FIL TER AND DUST COLLECTION BAGS TO DRUM 1. Hook the loop on the top of filter bag (A) Fig. 18, onto filter bag support rod (B) as shown. 2. Assemble extension rod (C) Fig. 19, onto the end of filter bag support rod (B). Raise support r ods (B) and (C), with filter bag (A) attached and place end ...

  • Delta 50-850 - page 9

    9 Fig. 23 ASSEMBLING DUST INT AKE HOSES TO BLOWER AND MOTOR ASSEMBL Y KEEP DUST CAPS INST ALLED A T ALL TIMES OVER INT AKE POR TS. REMOVE A DUST CAP ONL Y WHEN A FLEXIBLE HOSE IS A TT ACHED TO THE INT AKE PORT . The dust collector is supplied with a 4" dia. flexible dust intake hose. 1. T o assemble the intake hose (A) Fig. 23, to the blower a ...

  • Delta 50-850 - page 10

    10 Use proper extension cor ds. Make sur e your extension cord is in good condition and is a 3-wir e extension cor d which has a 3-prong gr ounding type plug and a 3-hole receptacle which will accept the tool’ s plug. When using an extension cord, be sur e to use one heavy enough to carry the current of the tool. An undersized cor d will cause a ...

  • Delta 50-850 - page 11

    11 OPERA TING CONTROLS WARNING: BEFORE OPERA TING THE MACHINE, FOR OPERA TOR SAFETY , AL W A YS MAKE CERT AIN THA T EACH DUST INT AKE PORT (WHICH IS NOT BEING USED OR PREVIOUSL Y ASSEMBLED TO A DUST COLLECTION SYSTEM) BE COVERED WITH A DUST INT AKE PORT CAP . THE ROT A TING F AN INSIDE THE BLOWER HOUSING IS ACCESSIBLE THROUGH THE DUST INT AKE PORTS ...

  • Delta 50-850 - page 12

    12 T wo Y ear Limited W arranty Delta will repair or r eplace, at its expense and at its option, any Delta machine, machine part, or machine accessory which in normal use has proven to be defective in workmanship or material, pr ovided that the customer returns the product prepaid to a Delta factory service center or authorized service station with ...

  • Delta 50-850 - page 13

    The following are trademarks of POR TER-CABLE · DEL T A (Las siguientes son marcas r egistradas de PORTER-CABLE S.A.): Auto-Set ® , BAMMER ® , B.O.S.S. ® , Builder’ s Saw ® , Contractor’ s Saw ® , Contractor’ s Saw II™, Delta ® , DEL T ACRAFT ® , DEL T AGRAM™, Delta Series 2000™, DURA TRONIC™, Emc²™, FLEX ® , Flying Chips? ...

Produzent Delta Kategorie Dust Collector

Dokumente, die wir vom Produzenten des Geräts Delta 50-850 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Delta
- Bedienungsanleitungen 50-850
- Produktkarten Delta
- Informationsbroschüren
- oder Energieetiketten Delta 50-850
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Delta 50-850.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Delta 50-850, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Delta 50-850. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Delta 50-850 ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Delta 50-850, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Delta 50-850 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Delta 50-850 verständlich ist.

Eine gänzliche Bedienungsanleitung von Delta sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Delta 50-850 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Delta 50-850 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Delta 50-850, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Delta 50-850 - die uns die ersten Schritte während der Nutzung von Delta 50-850 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Delta 50-850 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Delta 50-850 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Delta 50-850?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Delta 50-850 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Delta 50-850 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)