-
Delta 50-850 - page 1
INSTRUCTION MANUAL 1½ H.P . Single-Stage Dust Collector (Model 50-850) P ART NO. 902115 - 11-15-02 Copyright © 2002 Delta Machinery ESP AÑOL: PÁGINA 15 T o learn more about DEL T A MACHINER Y visit our website at: www .deltamachinery .com. For Parts, Service, W arranty or other Assistance, please call 1-800-223-7278 ( In Canada call 1-800-463-3 ...
-
Delta 50-850 - page 2
2 GENERAL SAFETY RULES W oodworking can be dangerous if safe and pr oper operating procedur es ar e not followed. As with all machinery , ther e are certain hazar ds involved with the operation of the pr oduct. Using the machine with respect and caution will considerably lessen the possibility of personal injury . However , if normal safety precaut ...
-
Delta 50-850 - page 3
3 ADDITIONAL SAFETY RULES FOR DUST COLLECTORS WARNING: F AILURE TO FOLLOW THESE RULES MA Y RESUL T IN SERIOUS PERSONAL INJUR Y . 1. DO NOT OPERA TE THIS MACHINE until it is assembled and installed according to the instructions. 2. OBT AIN ADVICE FROM YOUR SUPERVISOR, instructor , or another qualified person if you are not familiar with the operatio ...
-
Delta 50-850 - page 4
4 UNP ACKING AND CLEANING Carefully unpack the tool and all loose items fr om the shipping container(s). Remove the pr otective coating from all unpainted surfaces. This coating may be removed with a soft cloth moistened wi th ke r osene (do not use acetone, gasoline or lacquer thinner for this purpose). After cleaning, cover the unpainted surfaces ...
-
Delta 50-850 - page 5
5 ASSEMBL Y Fig. 4 Fig. 5 Fig. 6 Fig. 8 Fig. 7 ASSEMBLING CASTERS TO BASE 1. Insert threaded r od of caster (A) Fig. 4, into the hole located on the underside of base (B) and fasten with 3/8" lockwasher (C) and 3/8-16 hex nut (D). Fig. 5, illustrates the caster fastened to the base. 2. Assemble the remaining thr ee casters to the underside of ...
-
Delta 50-850 - page 6
6 Fig. 9 Fig. 10 Fig. 13 Fig. 12 4. Assemble the remaining drum supports (F) Fig. 9, to base (A) as shown. 5. Assemble “U” bracket (H) Fig. 10, to drum (J). Place a 5/16" flat washer then a 5/16" lockwasher onto a 5/16- 18x5/8" hex head screw . Insert the hex head screw (K) thru the hole in the “U” bracket and the hole in the ...
-
Delta 50-850 - page 7
7 Fig. 15 Fig. 16 Fig. 17 9. Attach the lower dust bag r etaining clip (A) Fig. 14A, to the dust collector drum. Align the two holes (B) in the retaining clip (A) Fig. 14A, with the two holes in the drum. Insert a 1/4-20x5/8" hex head screw thr ough the holes in the retaining clip and the holes in the drum. Place a 1/4" flat washer onto t ...
-
Delta 50-850 - page 8
8 Fig. 18 Fig. 19 Fig. 22 Fig. 20 Fig. 21 ASSEMBLING FIL TER AND DUST COLLECTION BAGS TO DRUM 1. Hook the loop on the top of filter bag (A) Fig. 18, onto filter bag support rod (B) as shown. 2. Assemble extension rod (C) Fig. 19, onto the end of filter bag support rod (B). Raise support r ods (B) and (C), with filter bag (A) attached and place end ...
-
Delta 50-850 - page 9
9 Fig. 23 ASSEMBLING DUST INT AKE HOSES TO BLOWER AND MOTOR ASSEMBL Y KEEP DUST CAPS INST ALLED A T ALL TIMES OVER INT AKE POR TS. REMOVE A DUST CAP ONL Y WHEN A FLEXIBLE HOSE IS A TT ACHED TO THE INT AKE PORT . The dust collector is supplied with a 4" dia. flexible dust intake hose. 1. T o assemble the intake hose (A) Fig. 23, to the blower a ...
-
Delta 50-850 - page 10
10 Use proper extension cor ds. Make sur e your extension cord is in good condition and is a 3-wir e extension cor d which has a 3-prong gr ounding type plug and a 3-hole receptacle which will accept the tool’ s plug. When using an extension cord, be sur e to use one heavy enough to carry the current of the tool. An undersized cor d will cause a ...
-
Delta 50-850 - page 11
11 OPERA TING CONTROLS WARNING: BEFORE OPERA TING THE MACHINE, FOR OPERA TOR SAFETY , AL W A YS MAKE CERT AIN THA T EACH DUST INT AKE PORT (WHICH IS NOT BEING USED OR PREVIOUSL Y ASSEMBLED TO A DUST COLLECTION SYSTEM) BE COVERED WITH A DUST INT AKE PORT CAP . THE ROT A TING F AN INSIDE THE BLOWER HOUSING IS ACCESSIBLE THROUGH THE DUST INT AKE PORTS ...
-
Delta 50-850 - page 12
12 T wo Y ear Limited W arranty Delta will repair or r eplace, at its expense and at its option, any Delta machine, machine part, or machine accessory which in normal use has proven to be defective in workmanship or material, pr ovided that the customer returns the product prepaid to a Delta factory service center or authorized service station with ...
-
Delta 50-850 - page 13
The following are trademarks of POR TER-CABLE · DEL T A (Las siguientes son marcas r egistradas de PORTER-CABLE S.A.): Auto-Set ® , BAMMER ® , B.O.S.S. ® , Builder’ s Saw ® , Contractor’ s Saw ® , Contractor’ s Saw II™, Delta ® , DEL T ACRAFT ® , DEL T AGRAM™, Delta Series 2000™, DURA TRONIC™, Emc²™, FLEX ® , Flying Chips? ...
¿Tienes una pregunta acerca de Delta 50-850?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Delta 50-850, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Delta 50-850 probablemente compartirá una forma de solucionarlo.