Deutsch dropdown-ico

Bedienungsanleitung Airlink AWLL6080

42 Seiten 1.73 mb
Download

Zur Seite of 42

Summary
  • Airlink AWLL6080 - page 1

    300N Draft 802.11n Wireless USB Adapter Model # AWLL6080 User’s Manual Rev. 1.1 ...

  • Airlink AWLL6080 - page 2

    2 Table of Contents 1. Introduction ................................................................................................................................. 3 1.1 Package Contents ........................................................................................................... ....... 3 1.2 Features .............................. ...

  • Airlink AWLL6080 - page 3

    3 1. Introduction Congratulations on your purchase of t he 300N Draft 802.11n Wireless USB Adapter. The 300N USB Adapter provides wireless da ta rate of up to 300 Mbps* when used with other AirLink101® 300N wir eless products. The high bandwidth combined with extended wireless coverage delivers fast and reliable connection for all of your networki ...

  • Airlink AWLL6080 - page 4

    4 2. Inst allation 2.1 Install Driver & Utility This section provides instructions on how to install the 300N Draft 802.11n Wireless USB Adapter . The driver is installed along with the utility. Step 1 Insert the USB adapter into an available USB port and turn on your computer. Step 2 After turning on the comput er, Windows will launch the Foun ...

  • Airlink AWLL6080 - page 5

    5 Note: If the Autorun screen doesn’t appear automat ically, or if you get a blank white screen, go to Start , Run , and type D:UtilitySetup.exe (where D is the letter of your CD drive) and click OK . Windows Vista users : At this point, you may get a warning message like the one below. Make sure that you click Allo w to continue with the insta ...

  • Airlink AWLL6080 - page 6

    6 Step 4 Click Next at the welcome screen. Step 5 Click Next to accept the default destination folder. ...

  • Airlink AWLL6080 - page 7

    7 Step 6 Click Continue Anyway at the Windows Logo Screen. (For Windows 2000, click Yes at the Digital Signatu re Not Found prompt). For Windows Vista, click the Install this driver software anyway button when the security warning appears. ...

  • Airlink AWLL6080 - page 8

    8 Step 7 Click Yes, I want to restart my computer now and then Finish to restart your computer. Step 8 After the computer is re started, Windows will ask to connect to Windows ...

  • Airlink AWLL6080 - page 9

    9 Update, select No, not this time and click Next . If this screen does not appear, you can skip to section 2.2. Step 9 Select Install the software automatically and click Next . ...

  • Airlink AWLL6080 - page 10

    10 Step 10 Click Continue Anyway at the Windows Logo Screen. (For Windows 2000, click Yes at the Digital Signatur e Not Found prompt). ...

  • Airlink AWLL6080 - page 11

    11 For Windows Vista, click the Install this driver software anyway button when the security warning appears. Step 11 Click Finish . ...

  • Airlink AWLL6080 - page 12

    12 2.2 Verify Driver Installation To verify if the driver has been installed successfully, plea se perform the following steps. Step 1 Right-click on My C omputer from your desktop and select Properties . Step 2 If you are using Windows XP/2000 select the Hardware tab , then click on Device Manager . If you are using Windows Vista , click on the de ...

  • Airlink AWLL6080 - page 13

    13 Step 3 Expand Network adapters from the list and verify that AirLink101 300N Wireless USB Adapter is listed and no yellow question mark is beside it. If AirLink101 300N Wireless USB Adapter is not listed, or you see a yellow question mark beside it, you will need to reinstall the driver. ...

  • Airlink AWLL6080 - page 14

    14 3. Configuring the Adapter This section describes how to connect your wireless adapter to a wireless network. Note to Windows XP Users: You must disable the Wireless Zero Configur ation Utility in order to use the bundled Wireless Utility. Please follow the steps below to disable XP’s wireless utility. Windows Vista users can skip the followin ...

  • Airlink AWLL6080 - page 15

    15 Step 1 To open the utility, double click on the Wireless Monitor icon in the system tray at the bottom right-hand corner of your screen. Step 2 Go to the AP List tab, select the SSID (Network Name) of the wireless network you wish to connect to, and click Connect . ...

  • Airlink AWLL6080 - page 16

    16 If the network you are attempting to connect to is configured for encryption, you will see an orange lock icon next to the network. ...

  • Airlink AWLL6080 - page 17

    17 When you click on it and click connect, a box will pop up requesting the wireless encryption key for the router. Enter t he encryption key into the box and click OK . ...

  • Airlink AWLL6080 - page 18

    18 Step 3 You should now be connected. You shoul d see “Connected” in the top, right hand corner, and there will be a blue circle ar ound the antenna icon next to the network name. Troubleshooting : If you are experi encing problems with the connection (unable to connect, low signal strength, slow connection speed, not working, unstable wireles ...

  • Airlink AWLL6080 - page 19

    19 4. Wireless Monitor This section describes the various functi ons of the Wireless Monitor that you can configure, including the setti ngs of wireless encryption. 4.1 Wireless Information The Wireless Information box at the top of t he window provides you with the status of the current connection, includ ing signal, network name (SSI D), IP Addre ...

  • Airlink AWLL6080 - page 20

    20 4.2 AP List The AP List tab displays all the available wire less networks detected by the Wireless Adapter. Simply select the wireless network you wish to connect to and click Connect . If you have created multiple profiles, you can use the profile chooser at the bottom to select the specific profile you want to use. Then click Activate to enabl ...

  • Airlink AWLL6080 - page 21

    21 4.3 Profile Settings This section provides instructions on using the Profile Settings section of the wireless monitor. The My Wireless Networks box lists the different prof iles you’ve created for the different networks that you us e. Profiles are automatical ly created and added to this list when you connect to new networks. You can also manu ...

  • Airlink AWLL6080 - page 22

    22 The Profile Settings box will appear allowing you to specify the settings for your new profile or change settings for your existing profile. Once you are finished entering the settings, click OK to save the changes. ...

  • Airlink AWLL6080 - page 23

    23 4.4 Configuring Encryption This section describes the different types of encryption available and how to configure them. In most cases, encrypt ion will be automatically confi gured and all that will need to be entered is the key, as described in Section 3 Step 2 . The only time you will need to manually configure the encryption settings is if y ...

  • Airlink AWLL6080 - page 24

    24 These three are meant for the home user: None: No encryption in use WEP: The most popular but least se cure form of encryption WPA/WPA2-PSK: The most secure and recommended level of encryption The remaining two are for use in a corporat e environment that utilizes authentication servers. If you do not k now if you have an authenticatio n server, ...

  • Airlink AWLL6080 - page 25

    25 Configuring WEP encryption Select WEP from the Set Security Option box. Under Wired Equivalent Privacy (WEP) , you will want to select Shared or Open , depending on the router settings. In the Key box, you will want to type in the encrypt ion key for the rout er. If you check the Show text in the passw ord field box, your key will appear in the ...

  • Airlink AWLL6080 - page 26

    26 Configuring WPA/WPA2-PSK Encryption (for home users) Select WPA/WPA2-PSK from the Set Security Option box. Under Passphrase Settings select either TKIP or AES depending on the settings for your router. Enter the encryption key into the KEY box. ...

  • Airlink AWLL6080 - page 27

    27 Configuring WPA/WPA2 Encryption (for corporate networks) Select WPA/WPA2 from the Set Security Option box. Under Advanced Security Settings select either TKIP or AES depending on the settings for your router. Click on Advanced Config to enter your aut hentication settings. The adapter supports EAP-TLS, LEAP, EAP- TTLS, and PEAP authentication me ...

  • Airlink AWLL6080 - page 28

    28 Configuring 802.1x authentication (for corporate networks) Select 802.1x from the Set Security Option box. Click on Advanced Config to enter your aut hentication settings. ...

  • Airlink AWLL6080 - page 29

    29 The adapter supports EAP-TLS, LEAP, EAP- TTLS, and PEAP authentication methods. Refer to your system administrator for inform ation about what sett ings you should enter here. 4.5 Ad-hoc and Peer-to-Peer Wireless Networks Ad-hoc networking is used when you want to connect two or more computers together but you don’t have a router. In ad-hoc mo ...

  • Airlink AWLL6080 - page 30

    30 Open the Wireless Monitor. Click on Profile Setting , then click on New . The profile settings box will appear. First change the network type to Adhoc . (Infrastructure is for when you are using a router). Enter a profile name into the Profile Name box so that you can identify the profile. Type in a network nam e (SSID) into the SSID box Select ...

  • Airlink AWLL6080 - page 31

    31 Once that is done, click on the AP List . Select your new profile from the profile chooser and click Activate to enable the profile. You will need to configure all other comput ers that you are planni ng on connecting to your ad-hoc network with the same settings that you input on this screen. Every computer has to be set up exactly the same. If ...

  • Airlink AWLL6080 - page 32

    32 4.7 Wi-Fi Protected Setup (WPS) Wi-Fi Protected Setup™ ( WPS ) is a new and easy way to configure the encryption for your wireless network clients. In order to use it with your router, firstly, you must configure the wireless encryption on the router. You can find instructions for configuring it in the User Manual located on the CD that came w ...

  • Airlink AWLL6080 - page 33

    33 Write down the PIN if you are using Pin Code method and click next . ...

  • Airlink AWLL6080 - page 34

    34 If you choose Push Button method, make sure that you click on the Wi-Fi Protected Setup button. ...

  • Airlink AWLL6080 - page 35

    35 Go to your routers conf iguration screen and click on Wireless . Then click Wireless security . Make sure that t he Wi-Fi Protected Setup Enable box is checked. Then click the Add Wireless Device Wizard button. If you are using Pin Code method, enter the Pin Code in the Pin Number box and click connect . If you are using Push Button method, clic ...

  • Airlink AWLL6080 - page 36

    36 After a few moments both the router conf iguration screen and the adapter configuration screen should show a message telli ng you that you are connected. Click Finish on the adapter screen. ...

  • Airlink AWLL6080 - page 37

    37 Click Continue on the router configuration screen. ...

  • Airlink AWLL6080 - page 38

    38 4.7 About The About tab shows the Utility, Driver, and Firmware version as well as the MAC address of the adapter. ...

  • Airlink AWLL6080 - page 39

    39 Appendix A – Specifications Frequency Band • 2.4~2.5Ghz Standards • IEEE 802.11b / 802.11g • IEEE 802.11n draft Chipset • Ralink Interface • USB 2.0 Antenna type • Integrated antenna Security • WPA-PSK(TKIP) • WPA2-PSK (AES) • WEP 64/128 bits • 802.1x LED • Link/Power System requirement • Windows 2000, XP and Vista • ...

  • Airlink AWLL6080 - page 40

    40 Appendix B – Information Federal Communication Commission Interference S tatement This equipment has been tested and found to co mply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rule s. These limits are designed to provide reasonable protection against harmful interferenc e in a residential installation. This e ...

  • Airlink AWLL6080 - page 41

    41 European Union Notice: Radio products with the CE marking comply with the R&TTE Direct ive (1999/5/EC), the EMC Directive (89/336/EEC) and the Low Voltage Directive (73/23/EEC) issued by the Commission of the European Community. Compliance with these directives implies co nformity to the following European Norms: z EN 60950 Product Safety z ...

  • Airlink AWLL6080 - page 42

    42 T echnical Support E-mail: support@airlink101.com Toll Free: 1-888-746-3238 Web Site: www.airlink101.com *Theoretical maximum wireless signal rate derived from IEEE 802.11g standard and IEEE 802.11n draft specification version 1.0. Actual data throughput will vary. Network conditions and environmenta l factors, including volume of network traffi ...

Produzent Airlink Kategorie Network Card

Dokumente, die wir vom Produzenten des Geräts Airlink AWLL6080 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Airlink
- Bedienungsanleitungen AWLL6080
- Produktkarten Airlink
- Informationsbroschüren
- oder Energieetiketten Airlink AWLL6080
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Airlink AWLL6080.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Airlink AWLL6080, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Airlink AWLL6080. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Airlink AWLL6080 ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Airlink AWLL6080, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Airlink AWLL6080 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Airlink AWLL6080 verständlich ist.

Eine gänzliche Bedienungsanleitung von Airlink sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Airlink AWLL6080 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Airlink AWLL6080 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Airlink AWLL6080, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Airlink AWLL6080 - die uns die ersten Schritte während der Nutzung von Airlink AWLL6080 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Airlink AWLL6080 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Airlink AWLL6080 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Airlink AWLL6080?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Airlink AWLL6080 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Airlink AWLL6080 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Captcha
Neues Bild

Kommentare (0)