Bedienungsanleitung Pentair Quasar

12 Seiten 0.29 mb
Download

Zur Seite of 12

Summary
  • Pentair Quasar - page 1

    REV. F 1-6-05 1 P/N 98748000 Quasar ™ Light and Return W ater Flow for Above Ground Pools Owners Manual Pentair Water Pool and Spa, Inc. 1620 Hawkins Ave., Sanford, NC 27330 • (919) 566-8000 10951 West Los Angeles Ave., Moorpark, CA 93021 • (805) 523-2400 Visit us on the Internet at: www.pentairpool.com Important Notice Attention Installer. T ...

  • Pentair Quasar - page 2

    P/N 98748000 2 REV. F 1-6-05 SECTION I. IMPORTANT SAFETY INSTRUCTIONS When installing and using this electrical equipment, basic safety precautions should always be followed, including the following. 1. This light can be installed on storable above ground or permanent above ground pools. 2. A storable pool has a maximum water depth of 42 inches and ...

  • Pentair Quasar - page 3

    REV. F 1-6-05 3 P/N 98748000 NOTE Retain the gaskets supplied and keep them accessible. 3. Use the Teflon™ tape provided. Snugly wrap the threaded wall flange in a clockwise direction (as viewed from the back) starting at the edge of the threads; see Figure 2. Work towards the flange lip (overlapping 1/2 of the tape width with each wrap) then bac ...

  • Pentair Quasar - page 4

    P/N 98748000 4 REV. F 1-6-05 NOTE For narrow, interlocking, extruded aluminum wall panels, center flange between the ridges while viewed from the inside of the pool. Add the spacer and additional gasket to the flange before inserting the flange through the wall panel. This is necessary to accommodate a fountain attachment. 1 1 . With the inlet port ...

  • Pentair Quasar - page 5

    REV. F 1-6-05 5 P/N 98748000 1 6 . Now, from inside the pool, push the bulb assembly and flow director with the red cap/plug in place into the fitting body until the bulb assembly/flow director are nearly flush against the inside pool wall. 1 7 . Thread the bulb assembly nut until it just touches the fitting body, then finger tighten. CAUTION Do no ...

  • Pentair Quasar - page 6

    P/N 98748000 6 REV. F 1-6-05 ¿¿¿WHAT IS A GFCI??? A ‘Ground Fault Circuit Interrupter’ is an electrical safety device designed to measure electrical leakage in a circuit. It is far more sensitive than a standard circuit breaker. GFCI equipped breakers and outlet combinations react to unsafe leakage and shut the power off before electrical sh ...

  • Pentair Quasar - page 7

    REV. F 1-6-05 7 P/N 98748000 W ARNING Do not attach or hang anything but this cord from the cord cap through the hole in the body to the transformer housing. Attaching or hanging items from this location can result in failure to the body or the pool wall which can result in serious personal injury and/or property damage. 5 . Reinstall the snap-on c ...

  • Pentair Quasar - page 8

    P/N 98748000 8 REV. F 1-6-05 1 1 . Place the junction box cover on the junction box bottom so that the junction box can more easily snap into the transformer box; see Figure 15. Snap the pieces together, then remove junction box cover. 1 2 . Mount the transformer box on a pool support approximately 18 inches above the ground, in a position accessib ...

  • Pentair Quasar - page 9

    REV. F 1-6-05 9 P/N 98748000 SECTION V. RELAMPING INSTRUCTIONS W ARNING Risk of electric shock. Disconnect power before servicing this unit. Failure to disconnect power can result in death or severe personal injury. 1 . It is desirable to reduce the water level to the lower edge of the flow director. This makes bulb assembly replacement easier, but ...

  • Pentair Quasar - page 10

    P/N 98748000 10 REV. F 1-6-05 8 . Thread the bulb assembly nut until it just touches the fitting body, then finger tighten. CAUTION Do not over tighten as adjustability of flow director may be impaired and/or damage to parts causing leakage may occur. If low director does not rotate by hand, nut is too tight. 9. Take the red cap/plug off and gently ...

  • Pentair Quasar - page 11

    REV. F 1-6-05 11 P/N 98748000 7 . Remove the bulb assembly by pulling on the flow director while pushing the bulb assembly from the outside of the pool. NOTE The fitting body, threaded wall flange and gaskets may remain attached to the pool wall when winterizing, but should be removed if pool is to be stored. 8. For storable pools: remove the trans ...

  • Pentair Quasar - page 12

    P/N 98748000 12 REV. F 1-6-05 SA VE THESE INSTRUCTIONS. Pentair Water Pool and Spa, Inc. 1620 Hawkins Ave., Sanford, NC 27330 • (919) 566-8000 10951 West Los Angeles Ave., Moorpark, CA 93021 • (805) 523-2400 Visit us on the Internet at: www.pentairpool.com © 2004 Pentair Water Pool and Spa Incorporated. All rights reserved. Information in this ...

Produzent Pentair Kategorie Swimming Pool

Dokumente, die wir vom Produzenten des Geräts Pentair Quasar erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Pentair
- Bedienungsanleitungen Quasar
- Produktkarten Pentair
- Informationsbroschüren
- oder Energieetiketten Pentair Quasar
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Pentair Quasar.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Pentair Quasar, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Pentair Quasar. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Pentair Quasar ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Pentair Quasar, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Pentair Quasar hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Pentair Quasar verständlich ist.

Eine gänzliche Bedienungsanleitung von Pentair sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Pentair Quasar bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Pentair Quasar befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Pentair Quasar, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Pentair Quasar - die uns die ersten Schritte während der Nutzung von Pentair Quasar erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Pentair Quasar hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Pentair Quasar im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Pentair Quasar?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Pentair Quasar nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Pentair Quasar hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)