Bedienungsanleitung ATEN VS-162

16 Seiten 0.15 mb
Download

Zur Seite of 16

Summary
  • ATEN VS-162 - page 1

    User Manual VS-162 / VS-164 Read this guide thoroughly and follow t he installation and operation proce- dures carefully in order to prevent any damage to the units and/or any de- vices that connect to them. This package contains: M 1 VS-162 or VS-164 DVI Video Switch M 1 Power Adapter M 1 User Manual © Copyright 2005 ATEN ® International Co., Lt ...

  • ATEN VS-162 - page 2

    Note: This equipment has been tested and found to comply with the limits for a Class B digit al device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protec tion against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not instal ...

  • ATEN VS-162 - page 3

    Overview The 2 port VS-162 and 4 port VS-164 video splitters chart a new direction in multimedia functionality by combining DVI quality video and audio. They take the signals from an audio/video source and replicate them to two (VS-162) or four (VS-164) audio/video outputs. Splitters can be cascaded to three levels to handle up to 64 monitors (VS-1 ...

  • ATEN VS-162 - page 4

    Features M Fully compliant with t he DVI-digital and DVI-analog specification M Speaker enabled M Enhances the video signal for distances up to 1.8m (6’) M Supports DDC2B (Port 1 only) M LED display for easy status monitoring M Easy installation M Small form factor with metal housing - 2 - 2005-03-02 ...

  • ATEN VS-162 - page 5

    Hardware Requirements Input The following equipment must be installed on any computer that acts as a source of DVI cont ent : M A DVI-D or DVI-A display port Note: The quality of the display is affected by the quality of the DVI display card. For best results, we recommend you purchase a high quality product. M An audio out port (optional - for aud ...

  • ATEN VS-162 - page 6

    VS-162 / VS-164 Front View 1. Link LED Lights to indicate that t here is a working DVI connection to the computer. 2. Power LED Lights to indicate that the VS-162 / VS-164 is receiving power and is up and running. - 4 - 1 2 2005-03-02 ...

  • ATEN VS-162 - page 7

    VS-162 / VS-164 Rear View - 5 - 2 3 1 2 3 1 2005-03-02 ...

  • ATEN VS-162 - page 8

    1. Power Jack The power adapter cable plugs in here. 2. Media Input Section The cables from your computer’s DVI video and speaker ports plug in here. Note: If you connect a DDC monitor to Port 1, all ot her monitors must be able to support the highest resolution that the DDC monitor can provide. 3. Media Outp ut Secti on The cables from your DVI ...

  • ATEN VS-162 - page 9

    Installation Single Stage Refer to the installation diagram on the next page (the numbers in the diagram correspond to the numbers of the steps) and do the following: 1. Use a male to male DVI cable to connect your comput er’s DVI port to the VS-162 / VS-164’s Video In port. 2. Use a male to male audio cable to connect your comput er’s speake ...

  • ATEN VS-162 - page 10

    - 8 - 1 2 4 3 2005-03-02 ...

  • ATEN VS-162 - page 11

    Cascading To provide even more audio/video display, additional units can cascaded from the VS-162 / VS-164’s Media Out ports. Simply use additional male to male DVI and audio cables to connect a Media Out port on the parent splitter to the Media In port of the child splitter. Note: Splitters can be cascaded to a maximum of three levels. - 9 - 200 ...

  • ATEN VS-162 - page 12

    Specifications Function VS-162 VS-164 Outputs 2 4 LEDs Link 1 Power 1 Connectors Video In 1 x DVI port (F) Audio In 1 x Audi o jack Video Out 2 x DVI ports (F) 4 x DVI ports (F) Audio Ou t 2 x Au dio jacks 4 x Audio jacks Power 1 x DC 5.3V jack Power Adapter DC 5.3V Power Consumption 3.4W 4.8W Resolution Up to 1600 x 1200; DDC2B Cable Distance 1.8m ...

  • ATEN VS-162 - page 13

    DVI-I Pin Assignments Pin Signal Pin Signal 1 TMDS Data2- 16 Hot Plug Detect 2 TMDS Data2+ 17 TMDS Data0- 3 GND 18 TMDS Data0+ 4 N.C. 19 GND 5 N.C. 20 N.C. 6 DDC Clock 21 N.C. 7 DDC Data 22 TMDS Clock S hield 8 Analog Verti cal Sync . 23 TMDS Clock+ 9 TMDS Data1- 24 TMDS Clock- 10 TMDS Data1+ C1 Analog Red 11 GND C2 Analog Green 12 N.C. C3 Analog B ...

  • ATEN VS-162 - page 14

    Troubleshooting Symptom Possible Cause Action Erratic behavior. Unit not recei ving enough power. Use a DC 5.3V power adapter if you are not already using one. If you are already using a power adapter, check that it matc hes the system specificati ons (DC 5.3V), and that it is plugged i n and functioning properl y. Video doesn’t display on some p ...

  • ATEN VS-162 - page 15

    - 13 - Limited Warranty IN NO EVENT SHALL THE DIRECT VENDO R’S LIABILITY EXCEED THE PR ICE PAID FOR THE PRODUCT FROM THE DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQ UENTIAL DAMAGES RESU LTING FROM THE USE OF THE PRODUCT, DISK OR ITS DOCUMENTATION. The direct vendor makes no warranty or r epresentation, expre ssed, implied, or statutory with r ...

  • ATEN VS-162 - page 16

    Notes: - 14 - 2005-03-02 ...

Produzent ATEN Kategorie Video Splitters

Dokumente, die wir vom Produzenten des Geräts ATEN VS-162 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen ATEN
- Bedienungsanleitungen VS-162
- Produktkarten ATEN
- Informationsbroschüren
- oder Energieetiketten ATEN VS-162
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung ATEN VS-162.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen ATEN VS-162, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen ATEN VS-162. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts ATEN VS-162 ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts ATEN VS-162, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von ATEN VS-162 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von ATEN VS-162 verständlich ist.

Eine gänzliche Bedienungsanleitung von ATEN sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von ATEN VS-162 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von ATEN VS-162 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich ATEN VS-162, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts ATEN VS-162 - die uns die ersten Schritte während der Nutzung von ATEN VS-162 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit ATEN VS-162 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von ATEN VS-162 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich ATEN VS-162?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit ATEN VS-162 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit ATEN VS-162 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)