English dropdown-ico

Manual ATEN VS-162

16 pages 0.15 mb
Download

Go to site of 16

Summary
  • ATEN VS-162 - page 1

    User Manual VS-162 / VS-164 Read this guide thoroughly and follow t he installation and operation proce- dures carefully in order to prevent any damage to the units and/or any de- vices that connect to them. This package contains: M 1 VS-162 or VS-164 DVI Video Switch M 1 Power Adapter M 1 User Manual © Copyright 2005 ATEN ® International Co., Lt ...

  • ATEN VS-162 - page 2

    Note: This equipment has been tested and found to comply with the limits for a Class B digit al device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protec tion against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not instal ...

  • ATEN VS-162 - page 3

    Overview The 2 port VS-162 and 4 port VS-164 video splitters chart a new direction in multimedia functionality by combining DVI quality video and audio. They take the signals from an audio/video source and replicate them to two (VS-162) or four (VS-164) audio/video outputs. Splitters can be cascaded to three levels to handle up to 64 monitors (VS-1 ...

  • ATEN VS-162 - page 4

    Features M Fully compliant with t he DVI-digital and DVI-analog specification M Speaker enabled M Enhances the video signal for distances up to 1.8m (6’) M Supports DDC2B (Port 1 only) M LED display for easy status monitoring M Easy installation M Small form factor with metal housing - 2 - 2005-03-02 ...

  • ATEN VS-162 - page 5

    Hardware Requirements Input The following equipment must be installed on any computer that acts as a source of DVI cont ent : M A DVI-D or DVI-A display port Note: The quality of the display is affected by the quality of the DVI display card. For best results, we recommend you purchase a high quality product. M An audio out port (optional - for aud ...

  • ATEN VS-162 - page 6

    VS-162 / VS-164 Front View 1. Link LED Lights to indicate that t here is a working DVI connection to the computer. 2. Power LED Lights to indicate that the VS-162 / VS-164 is receiving power and is up and running. - 4 - 1 2 2005-03-02 ...

  • ATEN VS-162 - page 7

    VS-162 / VS-164 Rear View - 5 - 2 3 1 2 3 1 2005-03-02 ...

  • ATEN VS-162 - page 8

    1. Power Jack The power adapter cable plugs in here. 2. Media Input Section The cables from your computer’s DVI video and speaker ports plug in here. Note: If you connect a DDC monitor to Port 1, all ot her monitors must be able to support the highest resolution that the DDC monitor can provide. 3. Media Outp ut Secti on The cables from your DVI ...

  • ATEN VS-162 - page 9

    Installation Single Stage Refer to the installation diagram on the next page (the numbers in the diagram correspond to the numbers of the steps) and do the following: 1. Use a male to male DVI cable to connect your comput er’s DVI port to the VS-162 / VS-164’s Video In port. 2. Use a male to male audio cable to connect your comput er’s speake ...

  • ATEN VS-162 - page 10

    - 8 - 1 2 4 3 2005-03-02 ...

  • ATEN VS-162 - page 11

    Cascading To provide even more audio/video display, additional units can cascaded from the VS-162 / VS-164’s Media Out ports. Simply use additional male to male DVI and audio cables to connect a Media Out port on the parent splitter to the Media In port of the child splitter. Note: Splitters can be cascaded to a maximum of three levels. - 9 - 200 ...

  • ATEN VS-162 - page 12

    Specifications Function VS-162 VS-164 Outputs 2 4 LEDs Link 1 Power 1 Connectors Video In 1 x DVI port (F) Audio In 1 x Audi o jack Video Out 2 x DVI ports (F) 4 x DVI ports (F) Audio Ou t 2 x Au dio jacks 4 x Audio jacks Power 1 x DC 5.3V jack Power Adapter DC 5.3V Power Consumption 3.4W 4.8W Resolution Up to 1600 x 1200; DDC2B Cable Distance 1.8m ...

  • ATEN VS-162 - page 13

    DVI-I Pin Assignments Pin Signal Pin Signal 1 TMDS Data2- 16 Hot Plug Detect 2 TMDS Data2+ 17 TMDS Data0- 3 GND 18 TMDS Data0+ 4 N.C. 19 GND 5 N.C. 20 N.C. 6 DDC Clock 21 N.C. 7 DDC Data 22 TMDS Clock S hield 8 Analog Verti cal Sync . 23 TMDS Clock+ 9 TMDS Data1- 24 TMDS Clock- 10 TMDS Data1+ C1 Analog Red 11 GND C2 Analog Green 12 N.C. C3 Analog B ...

  • ATEN VS-162 - page 14

    Troubleshooting Symptom Possible Cause Action Erratic behavior. Unit not recei ving enough power. Use a DC 5.3V power adapter if you are not already using one. If you are already using a power adapter, check that it matc hes the system specificati ons (DC 5.3V), and that it is plugged i n and functioning properl y. Video doesn’t display on some p ...

  • ATEN VS-162 - page 15

    - 13 - Limited Warranty IN NO EVENT SHALL THE DIRECT VENDO R’S LIABILITY EXCEED THE PR ICE PAID FOR THE PRODUCT FROM THE DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQ UENTIAL DAMAGES RESU LTING FROM THE USE OF THE PRODUCT, DISK OR ITS DOCUMENTATION. The direct vendor makes no warranty or r epresentation, expre ssed, implied, or statutory with r ...

  • ATEN VS-162 - page 16

    Notes: - 14 - 2005-03-02 ...

Manufacturer ATEN Category Video Splitters

Documents that we receive from a manufacturer of a ATEN VS-162 can be divided into several groups. They are, among others:
- ATEN technical drawings
- VS-162 manuals
- ATEN product data sheets
- information booklets
- or energy labels ATEN VS-162
All of them are important, but the most important information from the point of view of use of the device are in the user manual ATEN VS-162.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals ATEN VS-162, service manual, brief instructions and user manuals ATEN VS-162. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product ATEN VS-162.

Similar manuals

A complete manual for the device ATEN VS-162, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use ATEN VS-162 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of ATEN VS-162.

A complete ATEN manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual ATEN VS-162 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the ATEN VS-162, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the ATEN VS-162, that we can find in the current document
3. Tips how to use the basic functions of the device ATEN VS-162 - which should help us in our first steps of using ATEN VS-162
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with ATEN VS-162
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of ATEN VS-162 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning ATEN VS-162?

Use the form below

If you did not solve your problem by using a manual ATEN VS-162, ask a question using the form below. If a user had a similar problem with ATEN VS-162 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)