Bedienungsanleitung IDEAL INDUSTRIES 61-095

13 Seiten 0.51 mb
Download

Zur Seite of 13

Summary
  • IDEAL INDUSTRIES 61-095 - page 1

    IDEAL INDUSTRIES, INC. TECHNICAL MANUAL MODEL: 61-095 The Service Informatio n provides the fo llowing informa tion: • Precautions and safety inform ation • Specifications • Performance test procedure • Calibrati on and calibration adjustm ent procedure • Basic maintenance (cl eaning, replaci ng the battery) Form num ber: TM61095 Revision ...

  • IDEAL INDUSTRIES 61-095 - page 2

    TABLE OF CONTENTS Title Page # Introduction 1 Precautions and Safety Information 1 Symbols 1 Safety 2 Specifications 3 General Specification 3 Voltage Specifications 4 Resistance and C ontinuity Specifications 4 Current Specifications 4 Physical and environment characteristics 5 Certification and compliance 5 Required Equipm ent 6 Basic Maintenance ...

  • IDEAL INDUSTRIES 61-095 - page 3

    Page 1 Introduction Warning To avoid shock or injury, do not perform the verification tests or cali bration procedures described in this manual unless you are qualified to do so. The information provided in this document is for the use of qualified personnel only. Caution The 61-095 contains parts that can be damaged by static discharge. Follow the ...

  • IDEAL INDUSTRIES 61-095 - page 4

    Page 2 SAFETY Review the following safety precautions to avoid injury and prevent damage to this product or any products connected to it. To avoid potential h azards, use the product only as specified. CAUTION. These statements identify conditions or practices that cou ld result in damage to the equipment or other property. WARNING. These statement ...

  • IDEAL INDUSTRIES 61-095 - page 5

    Page 3 SPECIFICATIONS All specifications are warrant ed unless noted typical and appl y to the 61-095. Stated accuracies are at 23º C ± 5ºC at less than 80% relative humidity and without the battery indicator display ed. General specifications Characteristics Description LCD display digi ts 3 ½ Display count 2,000 Numeric update rat e 2.5 times ...

  • IDEAL INDUSTRIES 61-095 - page 6

    Page 4 Measurement Characteristics Accuracy is ±(% reading + num ber of digits) at 2 3ºC ± 5º C, less than 80% R .H. Voltage Function Range Accuracy Overload protection V 600 Vrms ± (1.5%+ 3 dgt) 40Hz ~ 500Hz 600 Vrm s V 600 V ± (1% + 2 dgt) Input impedance: 1M Ω // less than 100pF. Resistance & Continuity Function Range Accuracy Overlo ...

  • IDEAL INDUSTRIES 61-095 - page 7

    Page 5 Physical and Environmental Characteristi cs Physical Characteristics Description Dimensi ons (H x W x D) 188mm x 66mm x 42mm Weight (with battery) 0.3Kg Environmental Characteristics Description Temperature operating 0 to + 50º C Non-Operating -20 to + 60º C Humidit y (operating) < 80% R.H. Altitude Operating 2,000 m (6560 ft.) Non-Oper ...

  • IDEAL INDUSTRIES 61-095 - page 8

    Page 6 Required Equipment Required equipment is listed in Tab le B. If the recommended m odels are no t available, equ ipment with equivalent specifications m ay be used. Repairs or servicing s hould be perform ed only by qualified personnel. Table B. Required Equipment Equipment Required Characteristics Recommended Model Calibrator AC Voltage Rang ...

  • IDEAL INDUSTRIES 61-095 - page 9

    Page 7 Basic Maintenance Warning To avoid shock, remove the te st leads and any input signal s before opening the case or replacing the battery or fuses. Opening the Meter Case Caution To avoid unintentional short circu it, always place the uncovered meter assembly on a protective surface. When the case of the meter is open, circuit connections are ...

  • IDEAL INDUSTRIES 61-095 - page 10

    Page 8 Performance Tests The following perform ance tests verify the complete ope rability of the meter and check the accuracy of each meter function against the meter’s specifications. Accuracy specifications are valid for a period of one year after cali bration, when measured at an operat ing temp er atu re o f 18 ºC to 28ºC and at a maximum ...

  • IDEAL INDUSTRIES 61-095 - page 11

    Page 9 Testing the Resistance Function To verify the accuracy of the re sistance function, do the following: 1. Connect the calib rator to V Ω and COM on the meter. 2. Turn the rotary switch to Ω . 3. Apply the inputs for step 1-4 i n Table 3. 4. Compare the meter display readings to the display reading s in Table 3. 5. If the display reading f ...

  • IDEAL INDUSTRIES 61-095 - page 12

    Page 10 OK Figure 2 Top shows correct method; bo ttom shows incorrect method. Calibration Calibrate the meter once a year to ensure that it perform s according to specifications. Per fo rm ca lib ra tio n at an a mbi ent t empe ra tu re o f 23ºC ± 2ºC and relative humidity of 75% or less. Calibration for the Model 61-095: 1. Disconnect the test ...

  • IDEAL INDUSTRIES 61-095 - page 13

    Form number TM61095 Rev 2 September 2002 Page 11 Figure 3 - Calibration Adjustment Points ...

Produzent IDEAL INDUSTRIES Kategorie Power Hammer

Dokumente, die wir vom Produzenten des Geräts IDEAL INDUSTRIES 61-095 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen IDEAL INDUSTRIES
- Bedienungsanleitungen 61-095
- Produktkarten IDEAL INDUSTRIES
- Informationsbroschüren
- oder Energieetiketten IDEAL INDUSTRIES 61-095
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung IDEAL INDUSTRIES 61-095.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen IDEAL INDUSTRIES 61-095, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen IDEAL INDUSTRIES 61-095. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts IDEAL INDUSTRIES 61-095 ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts IDEAL INDUSTRIES 61-095, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von IDEAL INDUSTRIES 61-095 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von IDEAL INDUSTRIES 61-095 verständlich ist.

Eine gänzliche Bedienungsanleitung von IDEAL INDUSTRIES sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von IDEAL INDUSTRIES 61-095 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von IDEAL INDUSTRIES 61-095 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich IDEAL INDUSTRIES 61-095, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts IDEAL INDUSTRIES 61-095 - die uns die ersten Schritte während der Nutzung von IDEAL INDUSTRIES 61-095 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit IDEAL INDUSTRIES 61-095 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von IDEAL INDUSTRIES 61-095 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich IDEAL INDUSTRIES 61-095?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit IDEAL INDUSTRIES 61-095 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit IDEAL INDUSTRIES 61-095 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)