Bedienungsanleitung Toro 53770

12 Seiten 0.48 mb
Download

Zur Seite of 12

Summary
  • Toro 53770 - page 1

    Introduction The T oro Wireless RainSensor connects to your irrigation system controller/timer to suspend automatic watering operation in the event of rain. Designed for ease of installation, your sensor-controlled irrigation system will be up and running in minutes. Before attempting the installation, please read through these instructions in thei ...

  • Toro 53770 - page 2

    Component Overview Receiver (Figure 1) 1 - Weather -resistant Cover: Slides upward to remove. Protects the Receiver module when located outdoors. Keep the cover installed at all times other than when manu- ally operating the Receiver . 2 - Antenna wire: Straighten the antenna wire verti- cally for the best reception. 3 - Sensor Status Indicator: St ...

  • Toro 53770 - page 3

    Quick Start Installation Instructions The following instructions are provided for the experienced installer . If you are installing a T oro Wireless Rainsensor for the first time, use the Detailed Installation Instructions starting on page 4. 1. Disconnect power to the irrigation system controller . 2. Always mount the Receiver FIRST , adjacent to ...

  • Toro 53770 - page 4

    Detailed Installation Instructions There are two main components of the Wireless RainSensor: the Receiver and the Sensor/T ransmitter . The Receiver is installed adjacent to the irrigation system controller . The Sensor/T ransmitter is installed outdoors where it is exposed to unobstructed rainfall. Mounting the Receiver 1. Mount the Receiver FIRST ...

  • Toro 53770 - page 5

    Remove the valve common wire from the valve common terminal (generally marked “ C ” , “ COM ” , or “ VC ” ). Join this wire to the White wire using a wire connector . Attach the Brown wire to the valve common terminal. Note: The yellow wire is not used in this application. Remove all common control wires from the valve common terminal(s ...

  • Toro 53770 - page 6

    P art 2 - Po wer Wire Connection Note: The Receiver requires 24 V ac to operate. It should only be connected to an irrigation controller that uses a 24 V ac UL listed Class 2 transformer to supply power . Caution: Do not connect the Receiver directly to 120/240 V ac po wer as this may result in irre versible dama ge . If you are in doubt, contact a ...

  • Toro 53770 - page 7

    Initial Receiver T esting Reconnect power to the controller and verify the Receiver ’ s Power Indicator is illumi- nated. Hold the Sensor/T ransmitter at close range to the Receiver , then lightly press and hold the T est Spindle. The Sensor Status Indicator should illuminate and remain on until the T est Spindle is released. The Signal Indicator ...

  • Toro 53770 - page 8

    Installation Procedure The Sensor/T ransmitter should be mounted vertically with the antenna wire extending straight down. Avoid installations wher e the antenna wire would contact any metal object. A rain gutter is an ideal location for the Sensor/T ransmitter . Simply position the bracket with the thumbscrew under the gutter lip and tighten to se ...

  • Toro 53770 - page 9

    RainSensor Operation Normal Operation When the RainSensor activates due to sufficient rainfall, the Sensor Status Indicator will remain illuminated on the Receiver and the sprinkler system will remain inactive until the moisture-absorbent discs inside the Sensor/T ransmitter have dried out. The rate at which the discs dry out will vary dependent on ...

  • Toro 53770 - page 10

    Sensor/T ransmitter Battery Replacement 1 . Remove the bottom housing cover of the Sensor/T ransmitter by gently pressing in and down on the lower opposing tabs using a small flat-blade screwdriver , then carefully slide the circuit board out. See Figure 9 . 2 . Remove the battery cover and batteries. Replace using two 3V CR2032 (or equivalent) bat ...

  • Toro 53770 - page 11

    The obstacles will all affect the transmitted signal and typically reduce the radiated power that will be read by the Receiver . D if ferent objects such as walls and floors affect the transmitted signal dif ferently depending on the material composition, geom- etry and thickness. T ypically , most residential and light commercial construction mate ...

  • Toro 53770 - page 12

    Specifications: Receiver Mounting Options: Stainless steel screws and/or double-sided foam tape. Sensor/T ransmitter Mounting Options: Quick-Clip TM rain gutter bracket and roof eaves/fascia mounting bracket with stainless steel screws. Sensor/T ransmitter Range: Up to 300' line-of-site. Sensor T ype: Industry-standard hygroscopic disc stack w ...

Produzent Toro Kategorie Weather Radio

Dokumente, die wir vom Produzenten des Geräts Toro 53770 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Toro
- Bedienungsanleitungen 53770
- Produktkarten Toro
- Informationsbroschüren
- oder Energieetiketten Toro 53770
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Toro 53770.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Toro 53770, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Toro 53770. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Toro 53770 ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Toro 53770, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Toro 53770 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Toro 53770 verständlich ist.

Eine gänzliche Bedienungsanleitung von Toro sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Toro 53770 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Toro 53770 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Toro 53770, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Toro 53770 - die uns die ersten Schritte während der Nutzung von Toro 53770 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Toro 53770 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Toro 53770 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Toro 53770?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Toro 53770 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Toro 53770 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)