Manuel d’utilisation Toro 53770

12 pages 0.48 mb
Télécharger

Aller à la page of 12

Summary
  • Toro 53770 - page 1

    Introduction The T oro Wireless RainSensor connects to your irrigation system controller/timer to suspend automatic watering operation in the event of rain. Designed for ease of installation, your sensor-controlled irrigation system will be up and running in minutes. Before attempting the installation, please read through these instructions in thei ...

  • Toro 53770 - page 2

    Component Overview Receiver (Figure 1) 1 - Weather -resistant Cover: Slides upward to remove. Protects the Receiver module when located outdoors. Keep the cover installed at all times other than when manu- ally operating the Receiver . 2 - Antenna wire: Straighten the antenna wire verti- cally for the best reception. 3 - Sensor Status Indicator: St ...

  • Toro 53770 - page 3

    Quick Start Installation Instructions The following instructions are provided for the experienced installer . If you are installing a T oro Wireless Rainsensor for the first time, use the Detailed Installation Instructions starting on page 4. 1. Disconnect power to the irrigation system controller . 2. Always mount the Receiver FIRST , adjacent to ...

  • Toro 53770 - page 4

    Detailed Installation Instructions There are two main components of the Wireless RainSensor: the Receiver and the Sensor/T ransmitter . The Receiver is installed adjacent to the irrigation system controller . The Sensor/T ransmitter is installed outdoors where it is exposed to unobstructed rainfall. Mounting the Receiver 1. Mount the Receiver FIRST ...

  • Toro 53770 - page 5

    Remove the valve common wire from the valve common terminal (generally marked “ C ” , “ COM ” , or “ VC ” ). Join this wire to the White wire using a wire connector . Attach the Brown wire to the valve common terminal. Note: The yellow wire is not used in this application. Remove all common control wires from the valve common terminal(s ...

  • Toro 53770 - page 6

    P art 2 - Po wer Wire Connection Note: The Receiver requires 24 V ac to operate. It should only be connected to an irrigation controller that uses a 24 V ac UL listed Class 2 transformer to supply power . Caution: Do not connect the Receiver directly to 120/240 V ac po wer as this may result in irre versible dama ge . If you are in doubt, contact a ...

  • Toro 53770 - page 7

    Initial Receiver T esting Reconnect power to the controller and verify the Receiver ’ s Power Indicator is illumi- nated. Hold the Sensor/T ransmitter at close range to the Receiver , then lightly press and hold the T est Spindle. The Sensor Status Indicator should illuminate and remain on until the T est Spindle is released. The Signal Indicator ...

  • Toro 53770 - page 8

    Installation Procedure The Sensor/T ransmitter should be mounted vertically with the antenna wire extending straight down. Avoid installations wher e the antenna wire would contact any metal object. A rain gutter is an ideal location for the Sensor/T ransmitter . Simply position the bracket with the thumbscrew under the gutter lip and tighten to se ...

  • Toro 53770 - page 9

    RainSensor Operation Normal Operation When the RainSensor activates due to sufficient rainfall, the Sensor Status Indicator will remain illuminated on the Receiver and the sprinkler system will remain inactive until the moisture-absorbent discs inside the Sensor/T ransmitter have dried out. The rate at which the discs dry out will vary dependent on ...

  • Toro 53770 - page 10

    Sensor/T ransmitter Battery Replacement 1 . Remove the bottom housing cover of the Sensor/T ransmitter by gently pressing in and down on the lower opposing tabs using a small flat-blade screwdriver , then carefully slide the circuit board out. See Figure 9 . 2 . Remove the battery cover and batteries. Replace using two 3V CR2032 (or equivalent) bat ...

  • Toro 53770 - page 11

    The obstacles will all affect the transmitted signal and typically reduce the radiated power that will be read by the Receiver . D if ferent objects such as walls and floors affect the transmitted signal dif ferently depending on the material composition, geom- etry and thickness. T ypically , most residential and light commercial construction mate ...

  • Toro 53770 - page 12

    Specifications: Receiver Mounting Options: Stainless steel screws and/or double-sided foam tape. Sensor/T ransmitter Mounting Options: Quick-Clip TM rain gutter bracket and roof eaves/fascia mounting bracket with stainless steel screws. Sensor/T ransmitter Range: Up to 300' line-of-site. Sensor T ype: Industry-standard hygroscopic disc stack w ...

Fabricant Toro Catégorie Weather Radio

Les documents que nous recevons du fabricant de l'appareilToro 53770 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Toro
- manuels d’utilisations 53770
- fiches produit Toro
- dépliants
- ou étiquettes-énergie Toro 53770
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Toro 53770.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Toro 53770, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Toro 53770. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Toro 53770.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Toro 53770, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Toro 53770 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Toro 53770.

Le manuel d’utilisation complet Toro, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Toro 53770 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Toro 53770, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lToro 53770 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Toro 53770 - qui devraient nous aider dans les premières étapes lors de l'utilisation Toro 53770
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Toro 53770
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Toro 53770 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Toro 53770?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Toro 53770, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Toro 53770 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Commentaires (0)