Bedienungsanleitung Packard Bell B3

15 Seiten 2.77 mb
Download

Zur Seite of 15

Summary
  • Packard Bell B3 - page 1

    Packard Bell EasyNote B3 Disassembly Manual ...

  • Packard Bell B3 - page 2

    1 Packard Bell EasyNote B3 Disassembly Manual Table of Contents Overview ....................................................................................................................................................... 2 Technician Notes .......................................................................................................... ...

  • Packard Bell B3 - page 3

    2 Packard Bell EasyNote B3 Disassembly Manual Overview This document contains step-by-step disassembly instructions for the EasyNote B3 chassis. The instructions are illustrated where necessary with images of the part that is being removed or disassembled. Furthermore, the screws that are removed are shown next to the image of the parts themselves. ...

  • Packard Bell B3 - page 4

    3 Packard Bell EasyNote B3 Disassembly Manual Hazardous Voltage There is hazardous voltage present inside the computer when it is connected to an AC supply, even when the computer’ s power switch is off. Exposure to hazardous voltage could cause personal injury. To avoid risk of injury, contact an Authorized Service Provider for proper (un)instal ...

  • Packard Bell B3 - page 5

    4 Packard Bell EasyNote B3 Disassembly Manual System Disassembly HDD To remove the HDD, perform the following steps: 1. Remove the HDD cover (2 screws marked A on Picture 1 ). 2. Remove the 2 screws holding the HDD bracket. 3. Pull back the HDD bracket and gently lift out the HDD. 4. Remove the bracket from the HDD (4 screws). Picture 1. Bottom Bas ...

  • Packard Bell B3 - page 6

    5 Picture 2. Power Cable of Heat Sink Assembly Picture 3. Heat Sink Assembly Screws WiFi LAN Adapter (Mini PCI) To remove the Wireless LAN Adapter (mini PCI), perform the following steps: 1. Remove the bottom cover (5 screws marked B on Picture 1 ). 2. Push the clips securing the card sideways; the card will ‘ eject’ . 3. Disconnect the WLAN an ...

  • Packard Bell B3 - page 7

    6 Picture 4. WLAN Mini PCI Adapter and Antenna Note: The WLAN card has 2 connectors: MAIN and AUX. Please be sure to connect the antenna to the MAIN connector when re-assembling the WLAN card! Keyboard To remove the keyboard, perform the following steps: 1. Remove the 3 screws located in the battery compartment ( Picture 5 ). 2. Push up the keyboar ...

  • Packard Bell B3 - page 8

    7 Picture 7. Keyboard Flat Cable Speakers To remove the speakers, perform the following steps: 1. Remove the keyboard cover as described in the chapter Keyboard . 2. Disconnect the speaker cables as shown in Picture 8 , Picture 9 , and Picture 10 . 3. Remove the screws securing the speaker (2 scre ws per speaker). 4. Lift out the speakers. Picture ...

  • Packard Bell B3 - page 9

    8 Picture 10. Right Speaker Connector LCD Screen Assembly To remove the LCD screen assembly, perform the following steps: 1. Remove the keyboard top cover as described in the chapter Keyboard . 2. Remove the LCD hinge covers; these are ‘ clicked’ in place on the backside of the notebook. The best way is to leverage them slightly using a flat-he ...

  • Packard Bell B3 - page 10

    9 Picture 11. Bottom Base Screws Picture 12. Glide Pad Flat Cable Picture 13. Main Board Screws Under Keyboard Cover ...

  • Packard Bell B3 - page 11

    10 Picture 14. Main Board Screws Translation Board The translation board is a small PCB with a USB, VGA-Out and AC adapter connector. To remove it, perform the following steps: 1. Perform all steps to remove the main board (see chapter Main Board ). 2. Remove the screw holding the translation board. 3. Lift out the translation board. Modem To remov ...

  • Packard Bell B3 - page 12

    11 Picture 15. LCD Switch LCD Screen Disassembly LCD Lid Assembly To remove the LCD lid assembly, perform the following steps: 1. Remove the keyboard top cover as described above. 2. Remove the LCD hinge covers; these are ‘ clicked’ in place on the backside of the notebook. The easiest way is to leverage them slightly using a flat-head screwdri ...

  • Packard Bell B3 - page 13

    12 Picture 16. LCD Bezel Inverter Board To remove the inverter board, perform the following steps: 1. Unplug the cable on the inverter board. 2. Remove the screw (screw A in Picture 17 ). 3. Take away the inverter board. Picture 17. LCD Assembly Without Bezel LCD Panel To remove the LCD panel, perform the following steps: 1. Remove the 4 screws hol ...

  • Packard Bell B3 - page 14

    13 3. Gently lift out the LCD panel. 4. Remove the remaining 2 screws on each side of the LCD panel to remove the brackets. Wireless Antenna To remove the wireless antenna, perform the following steps: 1. After removing the LCD panel, remove the tape holding the antenna. 2. Remove the screw (see Picture 18 ). Picture 18. Wireless Antenna Screw LCD ...

  • Packard Bell B3 - page 15

    14 Packard Bell EasyNote B3 Disassembly Manual Notice The information in this guide is subject to change without notice. This guide contains information protected by copyright. No part of this guide may be photocopied or reproduced in any form or by any means without prior written consent from NEC Computers International B.V. NEC COMPUTERS INTERNAT ...

Produzent Packard Bell Kategorie Laptop

Dokumente, die wir vom Produzenten des Geräts Packard Bell B3 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Packard Bell
- Bedienungsanleitungen B3
- Produktkarten Packard Bell
- Informationsbroschüren
- oder Energieetiketten Packard Bell B3
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Packard Bell B3.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Packard Bell B3, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Packard Bell B3. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Packard Bell B3 ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Packard Bell B3, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Packard Bell B3 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Packard Bell B3 verständlich ist.

Eine gänzliche Bedienungsanleitung von Packard Bell sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Packard Bell B3 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Packard Bell B3 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Packard Bell B3, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Packard Bell B3 - die uns die ersten Schritte während der Nutzung von Packard Bell B3 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Packard Bell B3 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Packard Bell B3 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Packard Bell B3?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Packard Bell B3 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Packard Bell B3 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)