Manuel d’utilisation Packard Bell B3

15 pages 2.77 mb
Télécharger

Aller à la page of 15

Summary
  • Packard Bell B3 - page 1

    Packard Bell EasyNote B3 Disassembly Manual ...

  • Packard Bell B3 - page 2

    1 Packard Bell EasyNote B3 Disassembly Manual Table of Contents Overview ....................................................................................................................................................... 2 Technician Notes .......................................................................................................... ...

  • Packard Bell B3 - page 3

    2 Packard Bell EasyNote B3 Disassembly Manual Overview This document contains step-by-step disassembly instructions for the EasyNote B3 chassis. The instructions are illustrated where necessary with images of the part that is being removed or disassembled. Furthermore, the screws that are removed are shown next to the image of the parts themselves. ...

  • Packard Bell B3 - page 4

    3 Packard Bell EasyNote B3 Disassembly Manual Hazardous Voltage There is hazardous voltage present inside the computer when it is connected to an AC supply, even when the computer’ s power switch is off. Exposure to hazardous voltage could cause personal injury. To avoid risk of injury, contact an Authorized Service Provider for proper (un)instal ...

  • Packard Bell B3 - page 5

    4 Packard Bell EasyNote B3 Disassembly Manual System Disassembly HDD To remove the HDD, perform the following steps: 1. Remove the HDD cover (2 screws marked A on Picture 1 ). 2. Remove the 2 screws holding the HDD bracket. 3. Pull back the HDD bracket and gently lift out the HDD. 4. Remove the bracket from the HDD (4 screws). Picture 1. Bottom Bas ...

  • Packard Bell B3 - page 6

    5 Picture 2. Power Cable of Heat Sink Assembly Picture 3. Heat Sink Assembly Screws WiFi LAN Adapter (Mini PCI) To remove the Wireless LAN Adapter (mini PCI), perform the following steps: 1. Remove the bottom cover (5 screws marked B on Picture 1 ). 2. Push the clips securing the card sideways; the card will ‘ eject’ . 3. Disconnect the WLAN an ...

  • Packard Bell B3 - page 7

    6 Picture 4. WLAN Mini PCI Adapter and Antenna Note: The WLAN card has 2 connectors: MAIN and AUX. Please be sure to connect the antenna to the MAIN connector when re-assembling the WLAN card! Keyboard To remove the keyboard, perform the following steps: 1. Remove the 3 screws located in the battery compartment ( Picture 5 ). 2. Push up the keyboar ...

  • Packard Bell B3 - page 8

    7 Picture 7. Keyboard Flat Cable Speakers To remove the speakers, perform the following steps: 1. Remove the keyboard cover as described in the chapter Keyboard . 2. Disconnect the speaker cables as shown in Picture 8 , Picture 9 , and Picture 10 . 3. Remove the screws securing the speaker (2 scre ws per speaker). 4. Lift out the speakers. Picture ...

  • Packard Bell B3 - page 9

    8 Picture 10. Right Speaker Connector LCD Screen Assembly To remove the LCD screen assembly, perform the following steps: 1. Remove the keyboard top cover as described in the chapter Keyboard . 2. Remove the LCD hinge covers; these are ‘ clicked’ in place on the backside of the notebook. The best way is to leverage them slightly using a flat-he ...

  • Packard Bell B3 - page 10

    9 Picture 11. Bottom Base Screws Picture 12. Glide Pad Flat Cable Picture 13. Main Board Screws Under Keyboard Cover ...

  • Packard Bell B3 - page 11

    10 Picture 14. Main Board Screws Translation Board The translation board is a small PCB with a USB, VGA-Out and AC adapter connector. To remove it, perform the following steps: 1. Perform all steps to remove the main board (see chapter Main Board ). 2. Remove the screw holding the translation board. 3. Lift out the translation board. Modem To remov ...

  • Packard Bell B3 - page 12

    11 Picture 15. LCD Switch LCD Screen Disassembly LCD Lid Assembly To remove the LCD lid assembly, perform the following steps: 1. Remove the keyboard top cover as described above. 2. Remove the LCD hinge covers; these are ‘ clicked’ in place on the backside of the notebook. The easiest way is to leverage them slightly using a flat-head screwdri ...

  • Packard Bell B3 - page 13

    12 Picture 16. LCD Bezel Inverter Board To remove the inverter board, perform the following steps: 1. Unplug the cable on the inverter board. 2. Remove the screw (screw A in Picture 17 ). 3. Take away the inverter board. Picture 17. LCD Assembly Without Bezel LCD Panel To remove the LCD panel, perform the following steps: 1. Remove the 4 screws hol ...

  • Packard Bell B3 - page 14

    13 3. Gently lift out the LCD panel. 4. Remove the remaining 2 screws on each side of the LCD panel to remove the brackets. Wireless Antenna To remove the wireless antenna, perform the following steps: 1. After removing the LCD panel, remove the tape holding the antenna. 2. Remove the screw (see Picture 18 ). Picture 18. Wireless Antenna Screw LCD ...

  • Packard Bell B3 - page 15

    14 Packard Bell EasyNote B3 Disassembly Manual Notice The information in this guide is subject to change without notice. This guide contains information protected by copyright. No part of this guide may be photocopied or reproduced in any form or by any means without prior written consent from NEC Computers International B.V. NEC COMPUTERS INTERNAT ...

Fabricant Packard Bell Catégorie Laptop

Les documents que nous recevons du fabricant de l'appareilPackard Bell B3 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Packard Bell
- manuels d’utilisations B3
- fiches produit Packard Bell
- dépliants
- ou étiquettes-énergie Packard Bell B3
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Packard Bell B3.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Packard Bell B3, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Packard Bell B3. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Packard Bell B3.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Packard Bell B3, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Packard Bell B3 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Packard Bell B3.

Le manuel d’utilisation complet Packard Bell, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Packard Bell B3 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Packard Bell B3, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lPackard Bell B3 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Packard Bell B3 - qui devraient nous aider dans les premières étapes lors de l'utilisation Packard Bell B3
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Packard Bell B3
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Packard Bell B3 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Packard Bell B3?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Packard Bell B3, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Packard Bell B3 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Commentaires (0)