Bedienungsanleitung SWR Sound 1X10T

18 Seiten 0.93 mb
Download

Zur Seite of 18

Summary
  • SWR Sound 1X10T - page 1

    WorkingMa n ’ s Series BASS SPEAKER ENCLOSURES USER GUIDE SWR SOUND CORP. • SUN VALLEY, CA • USA includes: WORKINGMAN’S 1X10T WORKINGMAN’S 1X15T WORKINGMAN’S 2X10T WORKINGMAN’S 4X10T WORKINGMAN’S TOWER ...

  • SWR Sound 1X10T - page 2

    INTRODUCTION Congratulations on your purchase of an SWR WorkingMan’s Series bass speaker enclosure. By placing an SWR cabinet in your bass amplification system you have made a sound desicion that could very well be the best of your life! Just a little humor there, but true nonetheless. For over 15 years we here at SWR have been putting everything ...

  • SWR Sound 1X10T - page 3

    Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Table Of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Input Panel Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 ...

  • SWR Sound 1X10T - page 4

    GENERAL INFORMATION Connection Only one amplifier at a time can be connected to your WorkingMan’s speaker enclosure. DO NOT plug two amplifiers into one speaker enclosure, as it will not work and may damage your system. Always complete your amplifier-to-speaker and speaker-to-speaker connections before powering up your system. Full Range Input an ...

  • SWR Sound 1X10T - page 5

    INPUT PANEL DIAGRAM All Models (except WorkingMan’s Tower) 4 INPUT PANEL DIAGRAM WorkingMan’s Tower Tweeter Attenuator Switch 1/ 4" Input 1/ 4" Output Tweeter Attenuator Control 1/ 4" Input 1/ 4" Output Speakon Input Speakon Output ...

  • SWR Sound 1X10T - page 6

    WORKINGMAN’S 1X10T Specifications Specifications Description: 1x10 and Tweeter Speaker Enclosure Power Handling: 100 watts RMS Impedance: 8 ohms Frequency Response & SPL: 96 dB SPL @ 1W1M (–3dB @ 70Hz and 18KHz) Speaker Complement: (1) Custom Designed, Stamped Steel F rame, 10" SWR Driver (1) Custom Designed Tweeter Porting: Front Slot ...

  • SWR Sound 1X10T - page 7

    WORKINGMAN’S 1X15T Specifications Description: 1x15 and Tweeter Speaker Enclosure Power Handling: 200 watts RMS Impedance: 8 ohms Frequency Response & SPL: 100 dB SPL @ 1W1M (–6dB @ 40 Hz and 18KHz) Speaker Complement: (1) Custom Designed, Cast Frame 15" SWR Driver (1) Custom Designed Tweeter Porting: Front Slot Port Dimensions: 23.25& ...

  • SWR Sound 1X10T - page 8

    WORKINGMAN’S 2X10T Specifications Specifications Description: 2x10 and Tweeter Speaker Enclosure Power Handling: 200 watts RMS Impedance: 8 ohms Frequency Response & SPL: 98 dB SPL @ 1W1M (–3db @ 63 Hz and 18.5 KHz) Speaker Complement: (2) Custom Designed 10" SWR Drivers (1) Custom Designed Tweeter Porting: F ront Slot Port Dimensions: ...

  • SWR Sound 1X10T - page 9

    WORKINGMAN’S 4X10T Specifications Specifications Description: 4x10 and Tweeter Speaker Enclosure Power Handling: 400 watts RMS Impedance: 8 ohms Frequency Response & SPL: 100 dB SPL @ 1W1M (–3dB @ 50 Hz and 18KHz) Speaker Complement: (2) Custom Designed 10" SWR Drivers (1) LCustom Designed Tweeter Porting: Front Slot Port Dimensions: 2 ...

  • SWR Sound 1X10T - page 10

    WORKINGMAN’S TOWER Specifications Specifications Description: 8x10 and Tweeter Speaker Enclosure Power Handling: 800 watts RMS Impedance: 4 ohms Frequency Response & SPL: 93 dB @ 1W1M (–3dB 60 Hz & 13.5 kHz) Speaker Complement: (8) Custom Designed, Stamped Steel F rame, 10" SWR Drivers (1) Custom Designed Tweeter Porting: Front Slo ...

  • SWR Sound 1X10T - page 11

    WORKINGMAN’S TOWER (continued) Tweeter Attenuator Control The large dial found on the input panel of the cabinet is the Tweeter Attenuator Control (see dia - gram, page 4) . This control is used to adjust the level of high frequency signal present at the tweet - er. A normal setting for this control is straight up or “twelve o’clock . ” Tur ...

  • SWR Sound 1X10T - page 12

    IMPEDANCE: A GENERAL OVERVIEW The following terms will be helpful in understanding the information in this section: Impedance: The resistance of a device to the flow of alternating current. Often used to rate the resistance of a speaker's voice coil. Ohm: A unit of electrical resistance equal to that of a conductor in which a current of one am ...

  • SWR Sound 1X10T - page 13

    IMPEDANCE (continued) one 8 ohm enclosure, you know you can add one more 8 ohm speaker safely (8 divided by 2 = 4). Although much less common, you could also add one, or even two, 16 ohm cabinets: two 16 ohm cabinets in parallel have the same total impedance as one 8 ohm speaker. To get the most efficiency out of your system with the fewest cabinet ...

  • SWR Sound 1X10T - page 14

    than one cabinet, check all cable connections in the chain. If you then suspect that the problem may be a bad cable, you can use a 9 volt battery as a cable-tester. To do so, plug one end of the questionable cable into your speaker cabinet, and then touch the phone plug on the other end to the two terminals (+ and –) of the battery, contacting th ...

  • SWR Sound 1X10T - page 15

    SWR LIMITED WARRANTY SWR LIMITED WARRANTY All SWR WorkingMan’s Series Speaker Enclosures are warrantied to the original consumer purchaser for a period of One (1) Year (with the exception of the WorkingMan’s Tower which is warrantied for Two (2) Years) from the date of purchase in the USA from an Authorized SWR Deale r . The warranty is VOID if ...

  • SWR Sound 1X10T - page 16

    IMPORTANT SAFETY INSTRUCTIONS CAUTION: TO REDUCE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER OR BACK. CAUTION: TO REDUCE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER OR BACK. NO USER-SERVICEABLE PARTS INSIDE. PLEASE REFER TO A QUALIFIED SERVICE TECHNICIAN. NO USER-SERVICEABLE PARTS INSIDE. PLEASE REFER TO A QUALIFIED SERVICE TECHNICIAN. A. R ...

  • SWR Sound 1X10T - page 17

    WORKINGMAN’S 4004 Pro features at an affordable price! 400 watts of power housed in a durable road case with an extra rack space for your effects. Shape your tone with a 5-band EQ sec - tion, Aural Enhancer, and a variable limiter. Other fea - tures include: Tuner out for silent on-stage tuning, XLR Out to run your signal directly to the PA or re ...

  • SWR Sound 1X10T - page 18

    SWR SOUND CORPORATION 9130 Glenoaks Blvd . • Sun Valley, CA 91352 USA (818 ) 253- 4797 • F ax: ( 818 ) 253- 4799 ©2001 SWR Sound Corp. All rights reserved. PART NO. 320033 REV. 05/01 Learn more about SWR products and artists by point - ing your browser to: swrsound.com ...

Produzent SWR Sound Kategorie Car Speaker

Dokumente, die wir vom Produzenten des Geräts SWR Sound 1X10T erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen SWR Sound
- Bedienungsanleitungen 1X10T
- Produktkarten SWR Sound
- Informationsbroschüren
- oder Energieetiketten SWR Sound 1X10T
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung SWR Sound 1X10T.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen SWR Sound 1X10T, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen SWR Sound 1X10T. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts SWR Sound 1X10T ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts SWR Sound 1X10T, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von SWR Sound 1X10T hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von SWR Sound 1X10T verständlich ist.

Eine gänzliche Bedienungsanleitung von SWR Sound sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von SWR Sound 1X10T bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von SWR Sound 1X10T befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich SWR Sound 1X10T, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts SWR Sound 1X10T - die uns die ersten Schritte während der Nutzung von SWR Sound 1X10T erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit SWR Sound 1X10T hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von SWR Sound 1X10T im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich SWR Sound 1X10T?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit SWR Sound 1X10T nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit SWR Sound 1X10T hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)