English dropdown-ico

Manual SWR Sound 1X10T

18 pages 0.93 mb
Download

Go to site of 18

Summary
  • SWR Sound 1X10T - page 1

    WorkingMa n ’ s Series BASS SPEAKER ENCLOSURES USER GUIDE SWR SOUND CORP. • SUN VALLEY, CA • USA includes: WORKINGMAN’S 1X10T WORKINGMAN’S 1X15T WORKINGMAN’S 2X10T WORKINGMAN’S 4X10T WORKINGMAN’S TOWER ...

  • SWR Sound 1X10T - page 2

    INTRODUCTION Congratulations on your purchase of an SWR WorkingMan’s Series bass speaker enclosure. By placing an SWR cabinet in your bass amplification system you have made a sound desicion that could very well be the best of your life! Just a little humor there, but true nonetheless. For over 15 years we here at SWR have been putting everything ...

  • SWR Sound 1X10T - page 3

    Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Table Of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Input Panel Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 ...

  • SWR Sound 1X10T - page 4

    GENERAL INFORMATION Connection Only one amplifier at a time can be connected to your WorkingMan’s speaker enclosure. DO NOT plug two amplifiers into one speaker enclosure, as it will not work and may damage your system. Always complete your amplifier-to-speaker and speaker-to-speaker connections before powering up your system. Full Range Input an ...

  • SWR Sound 1X10T - page 5

    INPUT PANEL DIAGRAM All Models (except WorkingMan’s Tower) 4 INPUT PANEL DIAGRAM WorkingMan’s Tower Tweeter Attenuator Switch 1/ 4" Input 1/ 4" Output Tweeter Attenuator Control 1/ 4" Input 1/ 4" Output Speakon Input Speakon Output ...

  • SWR Sound 1X10T - page 6

    WORKINGMAN’S 1X10T Specifications Specifications Description: 1x10 and Tweeter Speaker Enclosure Power Handling: 100 watts RMS Impedance: 8 ohms Frequency Response & SPL: 96 dB SPL @ 1W1M (–3dB @ 70Hz and 18KHz) Speaker Complement: (1) Custom Designed, Stamped Steel F rame, 10" SWR Driver (1) Custom Designed Tweeter Porting: Front Slot ...

  • SWR Sound 1X10T - page 7

    WORKINGMAN’S 1X15T Specifications Description: 1x15 and Tweeter Speaker Enclosure Power Handling: 200 watts RMS Impedance: 8 ohms Frequency Response & SPL: 100 dB SPL @ 1W1M (–6dB @ 40 Hz and 18KHz) Speaker Complement: (1) Custom Designed, Cast Frame 15" SWR Driver (1) Custom Designed Tweeter Porting: Front Slot Port Dimensions: 23.25& ...

  • SWR Sound 1X10T - page 8

    WORKINGMAN’S 2X10T Specifications Specifications Description: 2x10 and Tweeter Speaker Enclosure Power Handling: 200 watts RMS Impedance: 8 ohms Frequency Response & SPL: 98 dB SPL @ 1W1M (–3db @ 63 Hz and 18.5 KHz) Speaker Complement: (2) Custom Designed 10" SWR Drivers (1) Custom Designed Tweeter Porting: F ront Slot Port Dimensions: ...

  • SWR Sound 1X10T - page 9

    WORKINGMAN’S 4X10T Specifications Specifications Description: 4x10 and Tweeter Speaker Enclosure Power Handling: 400 watts RMS Impedance: 8 ohms Frequency Response & SPL: 100 dB SPL @ 1W1M (–3dB @ 50 Hz and 18KHz) Speaker Complement: (2) Custom Designed 10" SWR Drivers (1) LCustom Designed Tweeter Porting: Front Slot Port Dimensions: 2 ...

  • SWR Sound 1X10T - page 10

    WORKINGMAN’S TOWER Specifications Specifications Description: 8x10 and Tweeter Speaker Enclosure Power Handling: 800 watts RMS Impedance: 4 ohms Frequency Response & SPL: 93 dB @ 1W1M (–3dB 60 Hz & 13.5 kHz) Speaker Complement: (8) Custom Designed, Stamped Steel F rame, 10" SWR Drivers (1) Custom Designed Tweeter Porting: Front Slo ...

  • SWR Sound 1X10T - page 11

    WORKINGMAN’S TOWER (continued) Tweeter Attenuator Control The large dial found on the input panel of the cabinet is the Tweeter Attenuator Control (see dia - gram, page 4) . This control is used to adjust the level of high frequency signal present at the tweet - er. A normal setting for this control is straight up or “twelve o’clock . ” Tur ...

  • SWR Sound 1X10T - page 12

    IMPEDANCE: A GENERAL OVERVIEW The following terms will be helpful in understanding the information in this section: Impedance: The resistance of a device to the flow of alternating current. Often used to rate the resistance of a speaker's voice coil. Ohm: A unit of electrical resistance equal to that of a conductor in which a current of one am ...

  • SWR Sound 1X10T - page 13

    IMPEDANCE (continued) one 8 ohm enclosure, you know you can add one more 8 ohm speaker safely (8 divided by 2 = 4). Although much less common, you could also add one, or even two, 16 ohm cabinets: two 16 ohm cabinets in parallel have the same total impedance as one 8 ohm speaker. To get the most efficiency out of your system with the fewest cabinet ...

  • SWR Sound 1X10T - page 14

    than one cabinet, check all cable connections in the chain. If you then suspect that the problem may be a bad cable, you can use a 9 volt battery as a cable-tester. To do so, plug one end of the questionable cable into your speaker cabinet, and then touch the phone plug on the other end to the two terminals (+ and –) of the battery, contacting th ...

  • SWR Sound 1X10T - page 15

    SWR LIMITED WARRANTY SWR LIMITED WARRANTY All SWR WorkingMan’s Series Speaker Enclosures are warrantied to the original consumer purchaser for a period of One (1) Year (with the exception of the WorkingMan’s Tower which is warrantied for Two (2) Years) from the date of purchase in the USA from an Authorized SWR Deale r . The warranty is VOID if ...

  • SWR Sound 1X10T - page 16

    IMPORTANT SAFETY INSTRUCTIONS CAUTION: TO REDUCE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER OR BACK. CAUTION: TO REDUCE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER OR BACK. NO USER-SERVICEABLE PARTS INSIDE. PLEASE REFER TO A QUALIFIED SERVICE TECHNICIAN. NO USER-SERVICEABLE PARTS INSIDE. PLEASE REFER TO A QUALIFIED SERVICE TECHNICIAN. A. R ...

  • SWR Sound 1X10T - page 17

    WORKINGMAN’S 4004 Pro features at an affordable price! 400 watts of power housed in a durable road case with an extra rack space for your effects. Shape your tone with a 5-band EQ sec - tion, Aural Enhancer, and a variable limiter. Other fea - tures include: Tuner out for silent on-stage tuning, XLR Out to run your signal directly to the PA or re ...

  • SWR Sound 1X10T - page 18

    SWR SOUND CORPORATION 9130 Glenoaks Blvd . • Sun Valley, CA 91352 USA (818 ) 253- 4797 • F ax: ( 818 ) 253- 4799 ©2001 SWR Sound Corp. All rights reserved. PART NO. 320033 REV. 05/01 Learn more about SWR products and artists by point - ing your browser to: swrsound.com ...

Manufacturer SWR Sound Category Car Speaker

Documents that we receive from a manufacturer of a SWR Sound 1X10T can be divided into several groups. They are, among others:
- SWR Sound technical drawings
- 1X10T manuals
- SWR Sound product data sheets
- information booklets
- or energy labels SWR Sound 1X10T
All of them are important, but the most important information from the point of view of use of the device are in the user manual SWR Sound 1X10T.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals SWR Sound 1X10T, service manual, brief instructions and user manuals SWR Sound 1X10T. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product SWR Sound 1X10T.

Similar manuals

A complete manual for the device SWR Sound 1X10T, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use SWR Sound 1X10T by users. Manuals are usually written by a technical writer, but in a language understandable to all users of SWR Sound 1X10T.

A complete SWR Sound manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual SWR Sound 1X10T - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the SWR Sound 1X10T, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the SWR Sound 1X10T, that we can find in the current document
3. Tips how to use the basic functions of the device SWR Sound 1X10T - which should help us in our first steps of using SWR Sound 1X10T
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with SWR Sound 1X10T
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of SWR Sound 1X10T in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning SWR Sound 1X10T?

Use the form below

If you did not solve your problem by using a manual SWR Sound 1X10T, ask a question using the form below. If a user had a similar problem with SWR Sound 1X10T it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)