Bedienungsanleitung IPSO CHM2097N

75 Seiten 1.42 mb
Download

Zur Seite of 75

Summary
  • IPSO CHM2097N - page 1

    5-08-51R3 October 201 1 Refer to Installation ma nual for full instructions. On-Pr emise Laundr y Planning Handbook IWF W asher-Extr actor s CHM2097N ...

  • IPSO CHM2097N - page 2

    © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT © Published by pe rmission of the cop yright owner . All rights reserved. No part of the cont ents of this book may be reproduced or transmitted in any form or by any means without the expressed writte n consent of the publisher . 5-08-51 1 T able of Contents Washer-Extractor ...

  • IPSO CHM2097N - page 3

    © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT 2 5-08-51 W asher-Extr actor s Introduction Model Identification - IWF W asher-Extractors Figure 1 CHM2097N IWF014 IWF030 IWF055 IWF018 IWF033 IWF075 IWF025 IWF040 ...

  • IPSO CHM2097N - page 4

    © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-51 3 S pecifications and Dimensio ns - Model IWF014 (2-speed) Capacity (dry weight) Ratio (kg/l) 1:1 1 13 lb. (5.9 kg) 1:10 14 lb. (6.5 kg) 1:9 15.87 lb. (7.2 kg) Cylinder Cylinder diameter , in. (mm) 20.86 (530) Cylinder depth, in. (mm) 1 1.61 (295) C ...

  • IPSO CHM2097N - page 5

    © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 4 5-08-51 Machine Dimensions - Model IWF014 (2-speed) 1 V en tilation Soap Dispenser 6 V entilatio n T ub 2 W arm Water Connections .75 in. 7 Electrical Connections 3 Liquid Soap Connectio ns 8 Drain V alve 4 Soft W ater Connections .75 in. 9 S t eam Connect ...

  • IPSO CHM2097N - page 6

    © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-51 5 Mounting Bolt Hole Locations - Model IWF014 (2-speed) CHM2156N Figure 3 CHM2156N 2.17 in. (55 mm) 21.65 in. (550 mm) 10.75 in. (273 mm) 1.46 in. (37 mm) 22.05 in. (560 mm) 25.4 in. (645 mm) 1 1.3 in. (287 mm) 2.17 in. (55 mm) 25.98 in. (660 mm) ø ...

  • IPSO CHM2097N - page 7

    © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 6 5-08-51 Electrical Inst allati on Requirements - Model IWF014 (2-speed) Only trained personnel should perform this procedure. Use caution while servicing machines with covers removed and power applied. W700 WA R N I N G Boiler Fed/Steam Heat Electric Heat ...

  • IPSO CHM2097N - page 8

    © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-51 7 S pecifications and Dimensio ns - Model IWF018 (2-speed) Capacity (dry weight) Ratio (kg/l) 1:1 1 14.33 lb. (6.9 kg) 1:10 16.09 lb. (7.3 kg) 1:9 18.51 lb. (8.4 kg) Cylinder Cylinder diameter , in. (mm) 20.86 (530) Cylinder depth, in. (mm) 13.58 (3 ...

  • IPSO CHM2097N - page 9

    © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 8 5-08-51 Machine Dimensions - Model IWF018 (2-speed) 1 W arm Water Connections .75 in. 6 Electrical Connections 2 Liquid Soap Connectio ns 7 Drain V alve 3 Soft W ater Connections .75 in. 8 S t eam Connections 4 Main Switch 9 Hard W ater Connections .75 in. ...

  • IPSO CHM2097N - page 10

    © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-51 9 Mounting Bolt Hole Locations - Model IWF018 (2-speed) CHM2105N Figure 5 2.17 in. (55 mm) 21.65 in. (550 mm) 10.75 in. (273 mm) 1.46 in. (37 mm) 22.05 in. (560 mm) 25.4 in. (645 mm) 1 1.3 in. (287 mm) 2.17 in. (55 mm) 25.98 in. (660 mm) ø 0.87 in. ...

  • IPSO CHM2097N - page 11

    © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 10 5-08-51 Electrical Inst allati on Requirements - Model IWF018 (2-speed) Only trained personnel should perform this procedure. Use caution while servicing machines with covers removed and power applied. W700 WA R N I N G Boiler Fed/Steam Heat Electric Heat ...

  • IPSO CHM2097N - page 12

    © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-51 11 S pecifications and Dimensio ns - Model IWF025 (2-speed) Capacity (dry weight) Ratio (kg/l) 1:1 1 18.95 lb. (8.6 kg) 1:10 20.94 lb. (9.5 kg) 1:9 23.14 lb. (10.5 kg) Cylinder Cylinder diameter , in. (mm) 20.86 (530) Cylinder depth, in. (mm) 17.32 ...

  • IPSO CHM2097N - page 13

    © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 12 5-08-51 Machine Dimensions - Model IWF025 (2-speed) 1 W arm Water Connections .75 in. 6 Electrical Connections 2 Liquid Soap Connectio ns 7 Drain V alve 3 Soft W ater Connections .75 in. 8 S t eam Connections 4 Main Switch 9 Hard W ater Connections .75 in ...

  • IPSO CHM2097N - page 14

    © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-51 13 Mounting Bolt Hole Locations - Model IWF025 (2-speed) CHM2158N Figure 7 CHM2158N 2.17 in. (55 mm) 21.65 in. (550 mm) 9.17 in. (233 mm) 1.46 in. (37 mm) 25.99 in. (660 mm) 29.33 in. (745 mm ) 16.81 in. (427 mm) 2.17 in. (55 mm) 25.98 in. (660 mm) ...

  • IPSO CHM2097N - page 15

    © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 14 5-08-51 Electrical Inst allati on Requirements - Model IWF025 (2-speed) Only trained personnel should perform this procedure. Use caution while servicing machines with covers removed and power applied. W700 WA R N I N G Boiler Fed/Steam Heat Electric Heat ...

  • IPSO CHM2097N - page 16

    © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-51 15 S pecifications and Dimensions - Models IWF030 (2-speed) Capacity (dry weight) Ratio (kg/l) 1:1 1 26.45 lb. (12 kg) 1:10 29.10 lb. (13.2 kg) 1:9 31.96 lb. (14.5 kg) Cylinder Cylinder diameter , in. (mm) 25.59 (650) Cylinder depth, in. (mm) 17.74 ...

  • IPSO CHM2097N - page 17

    © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 16 5-08-51 Machine Dimensions - Model IWF030 (2-speed) 1 W arm Water Connections .75 in. 6 S team Con nections 2 Soft W ater Connections .75 in. 7 Drain V alve 3 Main Switch 8 Hard W ater Connections .7 5 in. 4 V entilation T ub 9 Liquid Soap Connections 5 E ...

  • IPSO CHM2097N - page 18

    © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-51 17 Mounting Bolt Hole Locations - Model IWF030 (2-speed) CHM2159N Figure 9 2.76 in. (70 mm) 25.2 in. (640 mm) 10.24 in. (260 mm) 1.1 in. (28 mm) 26.38 in. (670 m m) 28.78 in. (731 mm) 16.14 in. (410 mm) 2.76 in. (70 mm) 30.71 in. (780 mm) ø0 .87 in ...

  • IPSO CHM2097N - page 19

    © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 18 5-08-51 Electrical Inst allati on Requirements - Model IWF030 (2-speed) Only trained personnel should perform this procedure. Use caution while servicing machines with covers removed and power applied. W700 WA R N I N G Boiler Fed/Steam Heat Electric Heat ...

  • IPSO CHM2097N - page 20

    © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-51 19 Inst allation Models IWF014, IWF018, IWF025 and IWF030 (2-speed) Surface The machine must be securely fixed on a flat surface (metal base, co ncrete or so lid ground). The anchoring is to be done on the 4 provided places in the holes on the corne ...

  • IPSO CHM2097N - page 21

    © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 20 5-08-51 Directly to Concrete Base The machine must be anchor ed directly to concrete base. Refer to Figur e 12 . Figure 12 IMPOR T ANT : Machine bolts should be re-checked on a quarterly basis. CHM2104N 1 Nut .5 in. (M12) (Models IWF014, IWF018 and IWF025 ...

  • IPSO CHM2097N - page 22

    © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-51 21 S pecifications and Dimensions - Models IWF033 (2-speed) Capacity (dry weight) Ratio (kg/l) 1:1 1 28.88 lb. (13.1 kg) 1:10 31.96 lb. (14.5 kg) 1:9 35.49 lb. (16.1 kg) Cylinder Cylinder diameter , in. (mm) 26.77 (680) Cylinder depth, in. (mm) 17.7 ...

  • IPSO CHM2097N - page 23

    © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 22 5-08-51 Machine Dimensions - Model IWF033 (2-speed) 1 W arm Water Connections .75 in. 6 Drain V alve 2 Soft W ater Connections .75 in. 7 S t eam Connections 3 Main Switch 8 Hard W ater Connections .75 in. 4 V entilation T ub 9 Liquid Soap Connections 5 El ...

  • IPSO CHM2097N - page 24

    © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-51 23 Mounting Bolt Hole Locations - Model IWF033 (2-speed) CHM2160N Figure 14 2.76 in. (70 mm) 25.2 in. (640 mm) 10.24 in. (260 mm) 1.1 in. (28 mm) 26.38 in. (670 mm) 28.78 in. (731 mm) 16.14 in. (410 mm) 2.76 in. (70 mm) 30.71 in. (780 mm) ø0 .87 in ...

  • IPSO CHM2097N - page 25

    © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 24 5-08-51 Electrical Inst allati on Requirements - Model IWF033 (2-speed) Only trained personnel should perform this procedure. Use caution while servicing machines with covers removed and power applied. W700 WA R N I N G Boiler Fed/Steam Heat Electric Heat ...

  • IPSO CHM2097N - page 26

    © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-51 25 S pecifications and Dimensio ns - Model IWF040 (2-speed) Capacity (dry weight) Ratio (kg/l) 1:1 1 36.15 lb. (16.4 kg) 1:10 39.90 lb. (18.1 kg) 1:9 44.31 lb. (20.1 kg) Cylinder Cylinder diameter , in. (mm) 26.77 (680) Cylinder depth, in. (mm) 19.6 ...

  • IPSO CHM2097N - page 27

    © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 26 5-08-51 Machine Dimensions - Model IWF040 (2-speed) 1 W arm Water Connections .75 in. 6 Electrical Connections 2 Hard W ater Connections .75 in. 7 Drain V alve 3 Soft W ater Connections .75 in. 8 S t eam Connections 4 Main Switch 9 Liquid Soap Connections ...

  • IPSO CHM2097N - page 28

    © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-51 27 Mounting Bolt Hole Locations - Model IWF040 (2-speed) CHM2161N Figure 16 CHM2161N 2.76 in. (70 mm) 25.2 in. (640 mm) 10.24 in. (260 mm) 1.3 in. (33 mm) 30.31 in. (770 mm) 32.72 in . (831 m m) 20.08 in . (510 m m) 2.76 in. (70 mm) 30.71 in . (780 ...

  • IPSO CHM2097N - page 29

    © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 28 5-08-51 Electrical Inst allati on Requirements - Model IWF040 (2-speed) Only trained personnel should perform this procedure. Use caution while servicing machines with covers removed and power applied. W700 WA R N I N G Boiler Fed/Steam Heat Electric Heat ...

  • IPSO CHM2097N - page 30

    © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-51 29 S pecifications and Dimensio ns - Model IWF055 (2-speed) Capacity (dry weight) Ratio (kg/l) 1:1 1 46.95 lb. (21.3 kg) 1:10 51.58 lb. (23.4 kg) 1:9 57.32 lb. (26 kg) Cylinder Cylinder diameter , in. (mm) 29.52 (750) Cylinder depth, in. (mm) 20.86 ...

  • IPSO CHM2097N - page 31

    © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 30 5-08-51 Machine Dimensions - Model IWF055 (2-speed) 1 Hard W ater Connections .75 in. 6 V entilatio n T ub 2 W arm Water Connections .75 in. 7 Electrical Connections 3 Soft W ater Connections .75 in. 8 Drain V alve 4 Liquid Soap Connectio ns 9 S t eam Con ...

  • IPSO CHM2097N - page 32

    © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-51 31 Mounting Bolt Hole Locations - Model IWF055 (2-speed) CHM2162N Figure 18 CHM2100N 3.54 in. (90 mm) 26.77 in. (680 mm) 1.97 in. (50 mm) 1.97 in. (50 mm) 1 1.1 in. (28 2 mm) 35.43 in. (900 mm) 20.39 in. (518 mm ) 3.54 in. (90 mm) 33.86 in. (860 mm) ...

  • IPSO CHM2097N - page 33

    © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 32 5-08-51 Electrical Inst allati on Requirements - Model IWF055 (2-speed) Only trained personnel should perform this procedure. Use caution while servicing machines with covers removed and power applied. W700 WA R N I N G Boiler Fed/Steam Heat Electric Heat ...

  • IPSO CHM2097N - page 34

    © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-51 33 S pecifications and Dimensio ns - Model IWF075 (2-speed) Capacity (dry weight) Ratio (kg/l) 1:1 1 61.72 lb. (28 kg) 1:10 67.02 lb. (30.4 kg) 1:9 73.41 lb. (33.3 kg) Cylinder Cylinder diameter , in. (mm) 33.46 (850) Cylinder depth, in. (mm) 21.14 ...

  • IPSO CHM2097N - page 35

    © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 34 5-08-51 Machine Dimensions - IWF075 (2-speed) 1 Hard W ater Connections .75 in. 6 Electrical Connections 2 W arm Water Connections .75 in. 7 Drain V alve 3 Soft W ater Connections .75 in. 8 S t eam Connections 4 Main Switch 9 Liquid Soap Connections 5 V e ...

  • IPSO CHM2097N - page 36

    © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-51 35 Mounting Bolt Hole Locations - Model IWF075 (2-speed) CHM2163N Figure 20 CHM2163N 1.81 in. (46 mm) 33.46 in. (850 mm) 2.64 in. (67 mm) 22.44 in. (570 mm) 40.55 in. (1030 mm) 2.76 in. (70 mm) 13.66 in. (347 mm) 2.76 in. (70 mm) 38.98 in. (990 mm) ...

  • IPSO CHM2097N - page 37

    © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 36 5-08-51 Electrical Inst allati on Requirements - Model IWF075 (2-speed) Only trained personnel should perform this procedure. Use caution while servicing machines with covers removed and power applied. W700 WA R N I N G Boiler Fed/Steam Heat Electric Heat ...

  • IPSO CHM2097N - page 38

    © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-51 37 Inst allation Models IWF033, IWF040, IWF055 and IWF075 (2-speed) Surface The machine must be securely fixed on a flat surface (metal base, co ncrete or so lid ground). The anchoring is to be done on the 4 provided places in the holes on the corne ...

  • IPSO CHM2097N - page 39

    © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 38 5-08-51 Anchoring to Concrete Base The machine must be anchor ed directly to concrete base. Refer to Figur e 23 . Figure 23 IMPOR T ANT : Machine bolt should be r e-checked on a quarterly basis. CHM2104N 1 Nut .625 in. (M16) 2 W asher 1.57 in. x 0.60 in. ...

  • IPSO CHM2097N - page 40

    © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-51 39 S pecifications and Di mensions - Models IWF0014 (M-speed) Capacity (dry weight) Ratio (kg/l) 1:1 1 13 lb. (5.9 kg) 1:10 14 lb. (6.5 kg) 1:9 15.87 lb. (7.2 kg) Cylinder Cylinder diameter , in. (mm) 20.86 (530) Cylinder depth, in. (mm) 1 1.61 (295 ...

  • IPSO CHM2097N - page 41

    © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 40 5-08-51 Machine Dimensions - Model IWF014 (M-speed) 1 W arm Water Connections .75 in. 6 Electrical Connections 2 Liquid Soap Connectio ns 7 Drain V alve 3 Soft W ater Connections .75 in. 8 S t eam Connections 4 Main Switch 9 Hard W ater Connections .75 in ...

  • IPSO CHM2097N - page 42

    © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-51 41 Mounting Bolt Hole Locations - Model IWF014 (M-speed) CHM2164N Figure 25 CHM2164N 2.17 in. (55 mm) 21.65 in. (550 mm) 10.75 in. (273 mm) 1.46 in. (37 mm) 22.05 in. (560 mm) 25.4 in. (645 mm ) 1 1.3 in. (287 mm) 2.17 in. (55 mm) 25.98 in. (660 mm) ...

  • IPSO CHM2097N - page 43

    © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 42 5-08-51 Electrical Inst allati on Requirements - Model IWF014 (M-speed) Only trained personnel should perform this procedure. Use caution while servicing machines with covers removed and power applied. W700 WA R N I N G Boiler Fed/Steam Heat Electric Heat ...

  • IPSO CHM2097N - page 44

    © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-51 43 S pecifications and Dimensio ns - Model IW F018 (M-speed) Capacity (dry weight) Ratio (kg/l) 1:1 1 14.33 lb. (6.9 kg) 1:10 16.09 lb. (7.3 kg) 1:9 18.51 lb. (8.4 kg) Cylinder Cylinder diameter , in. (mm) 20.86 (530) Cylinder depth, in. (mm) 13.58 ...

  • IPSO CHM2097N - page 45

    © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 44 5-08-51 Machine Dimensions - Model IWF018 (M-speed) 1 W arm Water Connections .75 in. 6 Electrical Connections 2 Liquid Soap Connectio ns 7 Drain V alve 3 Soft W ater Connections .75 in. 8 S t eam Connections 4 Main Switch 9 Hard W ater Connections .75 in ...

  • IPSO CHM2097N - page 46

    © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-51 45 Mounting Bolt Hole Locations - Model IWF018 (M-speed) CHM2164N Figure 27 CHM2164N 2.17 in. (55 mm) 21.65 in. (550 mm) 10.75 in. (273 mm) 1.46 in. (37 mm) 22.05 in. (560 mm ) 25.4 in. (645 mm) 1 1.3 in. (287 mm) 2.17 in. (55 mm) 25.98 in. (660 mm) ...

  • IPSO CHM2097N - page 47

    © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 46 5-08-51 Electrical Inst allati on Requirements - Model IWF018 (M-speed) Only trained personnel should perform this procedure. Use caution while servicing machines with covers removed and power applied. W700 WA R N I N G Boiler Fed/Steam Heat Electric Heat ...

  • IPSO CHM2097N - page 48

    © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-51 47 S pecifications and Dimensio ns - Model IW F025 (M-speed) Capacity (dry weight) Ratio (kg/l) 1:1 1 18.95 lb. (8.6 kg) 1:10 20.94 lb. (9.5 kg) 1:9 23.14 lb. (10.5 kg) Cylinder Cylinder diameter , in. (mm) 20.86 (530) Cylinder depth, in. (mm) 17.32 ...

  • IPSO CHM2097N - page 49

    © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 48 5-08-51 Machine Dimensions - Model IWF025 (M-speed) 1 W arm Water Connections .75 in. 6 Electrical Connections 2 Liquid Soap Connectio ns 7 Drain V alve 3 Soft W ater Connections .75 in. 8 S t eam Connections 4 Main Switch 9 Hard W ater Connections .75 in ...

  • IPSO CHM2097N - page 50

    © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-51 49 Mounting Bolt Hole Locations - Model IWF025 (M-speed) CHM2166N Figure 29 CHM2166N 2.17 in. (55 mm) 21.65 in. (550 m m) 9.17 in. (233 mm) 1.46 in. (37 mm) 25.99 in . (660 mm) 29.33 in. (745 mm) 16.81 in. (427 mm ) 2.17 in. (55 mm) 25.98 in. (660 m ...

  • IPSO CHM2097N - page 51

    © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 50 5-08-51 Electrical Inst allati on Requirements - Model IWF025 (M-speed) Only trained personnel should perform this procedure. Use caution while servicing machines with covers removed and power applied. W700 WA R N I N G Boiler Fed/Steam Heat Electric Heat ...

  • IPSO CHM2097N - page 52

    © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-51 51 S pecifications and Di mensions - Models IWF030 (M-speed) Capacity (dry weight) Ratio (kg/l) 1:1 1 26.45 lb. (12 kg) 1:10 29.10 lb. (13.2 kg) 1:9 31.96 lb. (14.5 kg) Cylinder Cylinder diameter , in. (mm) 25.59 (650) Cylinder depth, in. (mm) 17.74 ...

  • IPSO CHM2097N - page 53

    © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 52 5-08-51 Machine Dimensions - Model IWF030 (M-speed) 1 W arm Water Connections .75 in. 6 S team Con nections 2 Soft W ater Connections .75 in. 7 Drain V alve 3 Main Switch 8 Hard W ater Connections .7 5 in. 4 V entilation T ub 9 Liquid Soap Connections 5 E ...

  • IPSO CHM2097N - page 54

    © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-51 53 Mounting Bolt Hole Locations - Model IWF030 (M-speed) CHM2167N Figure 31 CHM2167N 2.76 in. (70 mm) 25.2 in. (640 mm ) 10.24 in. (260 mm ) 1.1 in. (28 mm) 26.38 in. (670 mm ) 28.78 in. (731 mm) 16.14 in. (410 mm) 2.76 in. (70 mm) 30.71 in. (780 mm ...

  • IPSO CHM2097N - page 55

    © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 54 5-08-51 Electrical Inst allati on Requirements - Model IWF030 (M-speed) Only trained personnel should perform this procedure. Use caution while servicing machines with covers removed and power applied. W700 WA R N I N G Boiler Fed/Steam Heat Electric Heat ...

  • IPSO CHM2097N - page 56

    © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-51 55 Inst allation Models IWF014, IWF018, IWF025 and IWF030 (M-speed) Surface The machine must be securely fixed on a flat surface (metal base, co ncrete or so lid ground). The anchoring is to be done on the 6 provided places in the holes on the corne ...

  • IPSO CHM2097N - page 57

    © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 56 5-08-51 Directly to Concrete Base The machine must be anchor ed directly to concrete base. Refer to Figur e 12 . Figure 34 IMPOR T ANT : Machine bolts should be re-checked on a quarterly basis. CHM2104N 1 Nut .5 in. (M12) (Models IWF014, IWF018 and IWF025 ...

  • IPSO CHM2097N - page 58

    © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-51 57 S pecifications and Di mensions - Models IWF033 (M-speed) Capacity (dry weight) Ratio (kg/l) 1:1 1 28.88 lb. (13.1 kg) 1:10 31.96 lb. (14.5 kg) 1:9 35.49 lb. (16.1 kg) Cylinder Cylinder diameter , in. (mm) 26.77 (680) Cylinder depth, in. (mm) 17. ...

  • IPSO CHM2097N - page 59

    © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 58 5-08-51 Machine Dimensions - Model IWF033 (M-speed) 1 W arm Water Connections .75 in. 6 Drain V alve 2 Soft W ater Connections .75 in. 7 S t eam Connections 3 Main Switch 8 Hard W ater Connections .7 5 in. 4 V entilation T ub 9 Liquid Soap Connections 5 E ...

  • IPSO CHM2097N - page 60

    © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-51 59 Mounting Bolt Hole Locations - Model IWF033 (M-speed) CHM2168N Figure 36 2.76 in. (70 mm) 25.2 in. (640 mm) 10.24 in. (260 mm) 1.1 in. (28 mm) 26.38 in. (670 mm) 28.78 in. (731 mm) 16.14 in. (410 mm) 2.76 in. (70 mm) 30.71 in. (780 m m) ø0 .87 i ...

  • IPSO CHM2097N - page 61

    © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 60 5-08-51 Electrical Inst allati on Requirements - Model IWF033 (M-speed) Only trained personnel should perform this procedure. Use caution while servicing machines with covers removed and power applied. W700 WA R N I N G Boiler Fed/Steam Heat Electric Heat ...

  • IPSO CHM2097N - page 62

    © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-51 61 S pecifications and Dimensio ns - Model IW F040 (M-speed) Capacity (dry weight) Ratio (kg/l) 1:1 1 36.15 lb. (16.4 kg) 1:10 39.90 lb. (18.1 kg) 1:9 44.31 lb. (20.1 kg) Cylinder Cylinder diameter , in. (mm) 26.77 (680) Cylinder depth, in. (mm) 19. ...

  • IPSO CHM2097N - page 63

    © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 62 5-08-51 Machine Dimensions - Model IWF040 (M-speed) 1 W arm Water Connection .75 in. 6 Drain V alve 2 Soft W ater Connections .75 in. 7 S t eam Connections 3 Main Switch 8 Hard W ater Connections .75 in. 4 V entilation T ub 9 Liquid Soap Connections 5 Ele ...

  • IPSO CHM2097N - page 64

    © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-51 63 Mounting Bolt Hole Locations - Model IWF040 (M-speed) CHM2169N Figure 38 CHM2169N 1.3 in. (33 mm) 25.2 in. (640 mm) 1.1 in. (28 mm) 20.08 in. (510 mm) 30.31 in. (770 mm) 32.72 in. (831 mm) 10.24 in. (260 mm) 2.76 in. (70 mm) 30.71 in. (780 mm) ø ...

  • IPSO CHM2097N - page 65

    © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 64 5-08-51 Electrical Inst allati on Requirements - Model IWF040 (M-speed) Only trained personnel should perform this procedure. Use caution while servicing machines with covers removed and power applied. W700 WA R N I N G Boiler Fed/Steam Heat Electric Heat ...

  • IPSO CHM2097N - page 66

    © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-51 65 S pecifications and Dimensio ns - Model IW F055 (M-speed) Capacity (dry weight) Ratio (kg/l) 1:1 1 46.95 lb. (21.3 kg) 1:10 51.58 lb. (23.4 kg) 1:9 57.32 lb. (26 kg) Cylinder Cylinder diameter , in. (mm) 29.52 (750) Cylinder depth, in. (mm) 20.86 ...

  • IPSO CHM2097N - page 67

    © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 66 5-08-51 Machine Dimensions - Model IWF055 (M-speed) 1 W arm Water Connections .75 in. 6 Drain V alve 2 Soft W ater Connections .75 in. 7 S t eam Connections 3 Main Switch. 8 Liquid Soap Connectio ns 4 V entilation T ub 9 Hard W ater Connections .75 in. 5 ...

  • IPSO CHM2097N - page 68

    © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-51 67 Mounting Bolt Hole Locations - Model IWF055 (M-speed) CHM2170N Figure 40 CHM2170N 3.54 in. (90 mm) 26.77 in. (680 mm ) 1.97 in. 50 mm) 1.97 in. (50 mm) 1 1.1 in. (282 mm) 35.43 in. (900 mm) 20.39 in. (518 mm) 3.54 in. (90 mm) 33.86 in. (860 mm) ? ...

  • IPSO CHM2097N - page 69

    © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 68 5-08-51 Electrical Inst allati on Requirements - Model IWF055 (M-speed) Only trained personnel should perform this procedure. Use caution while servicing machines with covers removed and power applied. W700 WA R N I N G Boiler Fed/Steam Heat Electric Heat ...

  • IPSO CHM2097N - page 70

    © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-51 69 S pecifications and Dimensio ns - Model IW F075 (M-speed) Capacity (dry weight) Ratio (kg/l) 1:1 1 61.72 lb. (28 kg) 1:10 67.02 lb. (30.4 kg) 1:9 73.41 lb. (33.3 kg) Cylinder Cylinder diameter , in. (mm) 33.46 (850) Cylinder depth, in. (mm) 21.14 ...

  • IPSO CHM2097N - page 71

    © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 70 5-08-51 Machine Dimensions - IWF075 (M-speed) 1 Hard W ater Connections .75 in. 6 Electrical Connections 2 W arm Water Connections .75 in. 7 Drain V alve 3 Soft W ater Connections .75 in. 8 S t eam Connections 4 Main Switch 9 Liquid Soap Connections 5 V e ...

  • IPSO CHM2097N - page 72

    © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-51 71 Mounting Bolt Hole Locations - Model IWF075 (M-speed) CHM2171N Figure 42 CHM2171N 1.81 in. (46 mm) 33.46 in. (850 mm) 2.64 in. (67 mm) 22.44 i n. (570 mm) 40.55 in. (1030 mm) 2.76 in. (70 mm) 13.66 in. (347 mm) 2.76 in. (70 mm) 38.98 in. (990 mm) ...

  • IPSO CHM2097N - page 73

    © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 72 5-08-51 Electrical Inst allati on Requirements - Model IWF075 (M-speed) Only trained personnel should perform this procedure. Use caution while servicing machines with covers removed and power applied. W700 WA R N I N G Boiler Fed/Steam Heat Electric Heat ...

  • IPSO CHM2097N - page 74

    © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-51 73 Inst allation Models IWF033, IWF040, IWF055 and IWF075 (M-speed) Surface The machine must be securely fixed on a flat surface (metal base, co ncrete or so lid ground). The anchoring is to be done on the 6 provided places in the holes on the corne ...

  • IPSO CHM2097N - page 75

    © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 74 5-08-51 Directly to Concrete Base The machine must be anchor ed directly to concrete base. Refer to Figur e 45 . Figure 45 IMPOR T ANT : Machine bolts should be re-checked on a quarterly basis. CHM2104N 1 Nut .625 in. (M16) 2 W asher 1.57 in. x 0.60 in. x ...

Produzent IPSO Kategorie Washer

Dokumente, die wir vom Produzenten des Geräts IPSO CHM2097N erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen IPSO
- Bedienungsanleitungen CHM2097N
- Produktkarten IPSO
- Informationsbroschüren
- oder Energieetiketten IPSO CHM2097N
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung IPSO CHM2097N.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen IPSO CHM2097N, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen IPSO CHM2097N. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts IPSO CHM2097N ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts IPSO CHM2097N, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von IPSO CHM2097N hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von IPSO CHM2097N verständlich ist.

Eine gänzliche Bedienungsanleitung von IPSO sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von IPSO CHM2097N bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von IPSO CHM2097N befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich IPSO CHM2097N, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts IPSO CHM2097N - die uns die ersten Schritte während der Nutzung von IPSO CHM2097N erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit IPSO CHM2097N hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von IPSO CHM2097N im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich IPSO CHM2097N?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit IPSO CHM2097N nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit IPSO CHM2097N hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)