ページに移動 of 75
5-08-51R3 October 201 1 Refer to Installation ma nual for full instructions. On-Pr emise Laundr y Planning Handbook IWF W asher-Extr actor s CHM2097N ...
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT © Published by pe rmission of the cop yright owner . All rights reserved. No part of the cont ents of this book may be reproduced or transmitted in any form or by any means without the expressed writte n consent of the publisher . 5-08-51 1 T able of Contents Washer-Extractor ...
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT 2 5-08-51 W asher-Extr actor s Introduction Model Identification - IWF W asher-Extractors Figure 1 CHM2097N IWF014 IWF030 IWF055 IWF018 IWF033 IWF075 IWF025 IWF040 ...
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-51 3 S pecifications and Dimensio ns - Model IWF014 (2-speed) Capacity (dry weight) Ratio (kg/l) 1:1 1 13 lb. (5.9 kg) 1:10 14 lb. (6.5 kg) 1:9 15.87 lb. (7.2 kg) Cylinder Cylinder diameter , in. (mm) 20.86 (530) Cylinder depth, in. (mm) 1 1.61 (295) C ...
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 4 5-08-51 Machine Dimensions - Model IWF014 (2-speed) 1 V en tilation Soap Dispenser 6 V entilatio n T ub 2 W arm Water Connections .75 in. 7 Electrical Connections 3 Liquid Soap Connectio ns 8 Drain V alve 4 Soft W ater Connections .75 in. 9 S t eam Connect ...
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-51 5 Mounting Bolt Hole Locations - Model IWF014 (2-speed) CHM2156N Figure 3 CHM2156N 2.17 in. (55 mm) 21.65 in. (550 mm) 10.75 in. (273 mm) 1.46 in. (37 mm) 22.05 in. (560 mm) 25.4 in. (645 mm) 1 1.3 in. (287 mm) 2.17 in. (55 mm) 25.98 in. (660 mm) ø ...
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 6 5-08-51 Electrical Inst allati on Requirements - Model IWF014 (2-speed) Only trained personnel should perform this procedure. Use caution while servicing machines with covers removed and power applied. W700 WA R N I N G Boiler Fed/Steam Heat Electric Heat ...
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-51 7 S pecifications and Dimensio ns - Model IWF018 (2-speed) Capacity (dry weight) Ratio (kg/l) 1:1 1 14.33 lb. (6.9 kg) 1:10 16.09 lb. (7.3 kg) 1:9 18.51 lb. (8.4 kg) Cylinder Cylinder diameter , in. (mm) 20.86 (530) Cylinder depth, in. (mm) 13.58 (3 ...
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 8 5-08-51 Machine Dimensions - Model IWF018 (2-speed) 1 W arm Water Connections .75 in. 6 Electrical Connections 2 Liquid Soap Connectio ns 7 Drain V alve 3 Soft W ater Connections .75 in. 8 S t eam Connections 4 Main Switch 9 Hard W ater Connections .75 in. ...
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-51 9 Mounting Bolt Hole Locations - Model IWF018 (2-speed) CHM2105N Figure 5 2.17 in. (55 mm) 21.65 in. (550 mm) 10.75 in. (273 mm) 1.46 in. (37 mm) 22.05 in. (560 mm) 25.4 in. (645 mm) 1 1.3 in. (287 mm) 2.17 in. (55 mm) 25.98 in. (660 mm) ø 0.87 in. ...
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 10 5-08-51 Electrical Inst allati on Requirements - Model IWF018 (2-speed) Only trained personnel should perform this procedure. Use caution while servicing machines with covers removed and power applied. W700 WA R N I N G Boiler Fed/Steam Heat Electric Heat ...
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-51 11 S pecifications and Dimensio ns - Model IWF025 (2-speed) Capacity (dry weight) Ratio (kg/l) 1:1 1 18.95 lb. (8.6 kg) 1:10 20.94 lb. (9.5 kg) 1:9 23.14 lb. (10.5 kg) Cylinder Cylinder diameter , in. (mm) 20.86 (530) Cylinder depth, in. (mm) 17.32 ...
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 12 5-08-51 Machine Dimensions - Model IWF025 (2-speed) 1 W arm Water Connections .75 in. 6 Electrical Connections 2 Liquid Soap Connectio ns 7 Drain V alve 3 Soft W ater Connections .75 in. 8 S t eam Connections 4 Main Switch 9 Hard W ater Connections .75 in ...
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-51 13 Mounting Bolt Hole Locations - Model IWF025 (2-speed) CHM2158N Figure 7 CHM2158N 2.17 in. (55 mm) 21.65 in. (550 mm) 9.17 in. (233 mm) 1.46 in. (37 mm) 25.99 in. (660 mm) 29.33 in. (745 mm ) 16.81 in. (427 mm) 2.17 in. (55 mm) 25.98 in. (660 mm) ...
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 14 5-08-51 Electrical Inst allati on Requirements - Model IWF025 (2-speed) Only trained personnel should perform this procedure. Use caution while servicing machines with covers removed and power applied. W700 WA R N I N G Boiler Fed/Steam Heat Electric Heat ...
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-51 15 S pecifications and Dimensions - Models IWF030 (2-speed) Capacity (dry weight) Ratio (kg/l) 1:1 1 26.45 lb. (12 kg) 1:10 29.10 lb. (13.2 kg) 1:9 31.96 lb. (14.5 kg) Cylinder Cylinder diameter , in. (mm) 25.59 (650) Cylinder depth, in. (mm) 17.74 ...
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 16 5-08-51 Machine Dimensions - Model IWF030 (2-speed) 1 W arm Water Connections .75 in. 6 S team Con nections 2 Soft W ater Connections .75 in. 7 Drain V alve 3 Main Switch 8 Hard W ater Connections .7 5 in. 4 V entilation T ub 9 Liquid Soap Connections 5 E ...
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-51 17 Mounting Bolt Hole Locations - Model IWF030 (2-speed) CHM2159N Figure 9 2.76 in. (70 mm) 25.2 in. (640 mm) 10.24 in. (260 mm) 1.1 in. (28 mm) 26.38 in. (670 m m) 28.78 in. (731 mm) 16.14 in. (410 mm) 2.76 in. (70 mm) 30.71 in. (780 mm) ø0 .87 in ...
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 18 5-08-51 Electrical Inst allati on Requirements - Model IWF030 (2-speed) Only trained personnel should perform this procedure. Use caution while servicing machines with covers removed and power applied. W700 WA R N I N G Boiler Fed/Steam Heat Electric Heat ...
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-51 19 Inst allation Models IWF014, IWF018, IWF025 and IWF030 (2-speed) Surface The machine must be securely fixed on a flat surface (metal base, co ncrete or so lid ground). The anchoring is to be done on the 4 provided places in the holes on the corne ...
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 20 5-08-51 Directly to Concrete Base The machine must be anchor ed directly to concrete base. Refer to Figur e 12 . Figure 12 IMPOR T ANT : Machine bolts should be re-checked on a quarterly basis. CHM2104N 1 Nut .5 in. (M12) (Models IWF014, IWF018 and IWF025 ...
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-51 21 S pecifications and Dimensions - Models IWF033 (2-speed) Capacity (dry weight) Ratio (kg/l) 1:1 1 28.88 lb. (13.1 kg) 1:10 31.96 lb. (14.5 kg) 1:9 35.49 lb. (16.1 kg) Cylinder Cylinder diameter , in. (mm) 26.77 (680) Cylinder depth, in. (mm) 17.7 ...
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 22 5-08-51 Machine Dimensions - Model IWF033 (2-speed) 1 W arm Water Connections .75 in. 6 Drain V alve 2 Soft W ater Connections .75 in. 7 S t eam Connections 3 Main Switch 8 Hard W ater Connections .75 in. 4 V entilation T ub 9 Liquid Soap Connections 5 El ...
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-51 23 Mounting Bolt Hole Locations - Model IWF033 (2-speed) CHM2160N Figure 14 2.76 in. (70 mm) 25.2 in. (640 mm) 10.24 in. (260 mm) 1.1 in. (28 mm) 26.38 in. (670 mm) 28.78 in. (731 mm) 16.14 in. (410 mm) 2.76 in. (70 mm) 30.71 in. (780 mm) ø0 .87 in ...
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 24 5-08-51 Electrical Inst allati on Requirements - Model IWF033 (2-speed) Only trained personnel should perform this procedure. Use caution while servicing machines with covers removed and power applied. W700 WA R N I N G Boiler Fed/Steam Heat Electric Heat ...
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-51 25 S pecifications and Dimensio ns - Model IWF040 (2-speed) Capacity (dry weight) Ratio (kg/l) 1:1 1 36.15 lb. (16.4 kg) 1:10 39.90 lb. (18.1 kg) 1:9 44.31 lb. (20.1 kg) Cylinder Cylinder diameter , in. (mm) 26.77 (680) Cylinder depth, in. (mm) 19.6 ...
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 26 5-08-51 Machine Dimensions - Model IWF040 (2-speed) 1 W arm Water Connections .75 in. 6 Electrical Connections 2 Hard W ater Connections .75 in. 7 Drain V alve 3 Soft W ater Connections .75 in. 8 S t eam Connections 4 Main Switch 9 Liquid Soap Connections ...
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-51 27 Mounting Bolt Hole Locations - Model IWF040 (2-speed) CHM2161N Figure 16 CHM2161N 2.76 in. (70 mm) 25.2 in. (640 mm) 10.24 in. (260 mm) 1.3 in. (33 mm) 30.31 in. (770 mm) 32.72 in . (831 m m) 20.08 in . (510 m m) 2.76 in. (70 mm) 30.71 in . (780 ...
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 28 5-08-51 Electrical Inst allati on Requirements - Model IWF040 (2-speed) Only trained personnel should perform this procedure. Use caution while servicing machines with covers removed and power applied. W700 WA R N I N G Boiler Fed/Steam Heat Electric Heat ...
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-51 29 S pecifications and Dimensio ns - Model IWF055 (2-speed) Capacity (dry weight) Ratio (kg/l) 1:1 1 46.95 lb. (21.3 kg) 1:10 51.58 lb. (23.4 kg) 1:9 57.32 lb. (26 kg) Cylinder Cylinder diameter , in. (mm) 29.52 (750) Cylinder depth, in. (mm) 20.86 ...
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 30 5-08-51 Machine Dimensions - Model IWF055 (2-speed) 1 Hard W ater Connections .75 in. 6 V entilatio n T ub 2 W arm Water Connections .75 in. 7 Electrical Connections 3 Soft W ater Connections .75 in. 8 Drain V alve 4 Liquid Soap Connectio ns 9 S t eam Con ...
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-51 31 Mounting Bolt Hole Locations - Model IWF055 (2-speed) CHM2162N Figure 18 CHM2100N 3.54 in. (90 mm) 26.77 in. (680 mm) 1.97 in. (50 mm) 1.97 in. (50 mm) 1 1.1 in. (28 2 mm) 35.43 in. (900 mm) 20.39 in. (518 mm ) 3.54 in. (90 mm) 33.86 in. (860 mm) ...
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 32 5-08-51 Electrical Inst allati on Requirements - Model IWF055 (2-speed) Only trained personnel should perform this procedure. Use caution while servicing machines with covers removed and power applied. W700 WA R N I N G Boiler Fed/Steam Heat Electric Heat ...
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-51 33 S pecifications and Dimensio ns - Model IWF075 (2-speed) Capacity (dry weight) Ratio (kg/l) 1:1 1 61.72 lb. (28 kg) 1:10 67.02 lb. (30.4 kg) 1:9 73.41 lb. (33.3 kg) Cylinder Cylinder diameter , in. (mm) 33.46 (850) Cylinder depth, in. (mm) 21.14 ...
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 34 5-08-51 Machine Dimensions - IWF075 (2-speed) 1 Hard W ater Connections .75 in. 6 Electrical Connections 2 W arm Water Connections .75 in. 7 Drain V alve 3 Soft W ater Connections .75 in. 8 S t eam Connections 4 Main Switch 9 Liquid Soap Connections 5 V e ...
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-51 35 Mounting Bolt Hole Locations - Model IWF075 (2-speed) CHM2163N Figure 20 CHM2163N 1.81 in. (46 mm) 33.46 in. (850 mm) 2.64 in. (67 mm) 22.44 in. (570 mm) 40.55 in. (1030 mm) 2.76 in. (70 mm) 13.66 in. (347 mm) 2.76 in. (70 mm) 38.98 in. (990 mm) ...
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 36 5-08-51 Electrical Inst allati on Requirements - Model IWF075 (2-speed) Only trained personnel should perform this procedure. Use caution while servicing machines with covers removed and power applied. W700 WA R N I N G Boiler Fed/Steam Heat Electric Heat ...
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-51 37 Inst allation Models IWF033, IWF040, IWF055 and IWF075 (2-speed) Surface The machine must be securely fixed on a flat surface (metal base, co ncrete or so lid ground). The anchoring is to be done on the 4 provided places in the holes on the corne ...
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 38 5-08-51 Anchoring to Concrete Base The machine must be anchor ed directly to concrete base. Refer to Figur e 23 . Figure 23 IMPOR T ANT : Machine bolt should be r e-checked on a quarterly basis. CHM2104N 1 Nut .625 in. (M16) 2 W asher 1.57 in. x 0.60 in. ...
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-51 39 S pecifications and Di mensions - Models IWF0014 (M-speed) Capacity (dry weight) Ratio (kg/l) 1:1 1 13 lb. (5.9 kg) 1:10 14 lb. (6.5 kg) 1:9 15.87 lb. (7.2 kg) Cylinder Cylinder diameter , in. (mm) 20.86 (530) Cylinder depth, in. (mm) 1 1.61 (295 ...
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 40 5-08-51 Machine Dimensions - Model IWF014 (M-speed) 1 W arm Water Connections .75 in. 6 Electrical Connections 2 Liquid Soap Connectio ns 7 Drain V alve 3 Soft W ater Connections .75 in. 8 S t eam Connections 4 Main Switch 9 Hard W ater Connections .75 in ...
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-51 41 Mounting Bolt Hole Locations - Model IWF014 (M-speed) CHM2164N Figure 25 CHM2164N 2.17 in. (55 mm) 21.65 in. (550 mm) 10.75 in. (273 mm) 1.46 in. (37 mm) 22.05 in. (560 mm) 25.4 in. (645 mm ) 1 1.3 in. (287 mm) 2.17 in. (55 mm) 25.98 in. (660 mm) ...
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 42 5-08-51 Electrical Inst allati on Requirements - Model IWF014 (M-speed) Only trained personnel should perform this procedure. Use caution while servicing machines with covers removed and power applied. W700 WA R N I N G Boiler Fed/Steam Heat Electric Heat ...
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-51 43 S pecifications and Dimensio ns - Model IW F018 (M-speed) Capacity (dry weight) Ratio (kg/l) 1:1 1 14.33 lb. (6.9 kg) 1:10 16.09 lb. (7.3 kg) 1:9 18.51 lb. (8.4 kg) Cylinder Cylinder diameter , in. (mm) 20.86 (530) Cylinder depth, in. (mm) 13.58 ...
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 44 5-08-51 Machine Dimensions - Model IWF018 (M-speed) 1 W arm Water Connections .75 in. 6 Electrical Connections 2 Liquid Soap Connectio ns 7 Drain V alve 3 Soft W ater Connections .75 in. 8 S t eam Connections 4 Main Switch 9 Hard W ater Connections .75 in ...
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-51 45 Mounting Bolt Hole Locations - Model IWF018 (M-speed) CHM2164N Figure 27 CHM2164N 2.17 in. (55 mm) 21.65 in. (550 mm) 10.75 in. (273 mm) 1.46 in. (37 mm) 22.05 in. (560 mm ) 25.4 in. (645 mm) 1 1.3 in. (287 mm) 2.17 in. (55 mm) 25.98 in. (660 mm) ...
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 46 5-08-51 Electrical Inst allati on Requirements - Model IWF018 (M-speed) Only trained personnel should perform this procedure. Use caution while servicing machines with covers removed and power applied. W700 WA R N I N G Boiler Fed/Steam Heat Electric Heat ...
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-51 47 S pecifications and Dimensio ns - Model IW F025 (M-speed) Capacity (dry weight) Ratio (kg/l) 1:1 1 18.95 lb. (8.6 kg) 1:10 20.94 lb. (9.5 kg) 1:9 23.14 lb. (10.5 kg) Cylinder Cylinder diameter , in. (mm) 20.86 (530) Cylinder depth, in. (mm) 17.32 ...
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 48 5-08-51 Machine Dimensions - Model IWF025 (M-speed) 1 W arm Water Connections .75 in. 6 Electrical Connections 2 Liquid Soap Connectio ns 7 Drain V alve 3 Soft W ater Connections .75 in. 8 S t eam Connections 4 Main Switch 9 Hard W ater Connections .75 in ...
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-51 49 Mounting Bolt Hole Locations - Model IWF025 (M-speed) CHM2166N Figure 29 CHM2166N 2.17 in. (55 mm) 21.65 in. (550 m m) 9.17 in. (233 mm) 1.46 in. (37 mm) 25.99 in . (660 mm) 29.33 in. (745 mm) 16.81 in. (427 mm ) 2.17 in. (55 mm) 25.98 in. (660 m ...
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 50 5-08-51 Electrical Inst allati on Requirements - Model IWF025 (M-speed) Only trained personnel should perform this procedure. Use caution while servicing machines with covers removed and power applied. W700 WA R N I N G Boiler Fed/Steam Heat Electric Heat ...
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-51 51 S pecifications and Di mensions - Models IWF030 (M-speed) Capacity (dry weight) Ratio (kg/l) 1:1 1 26.45 lb. (12 kg) 1:10 29.10 lb. (13.2 kg) 1:9 31.96 lb. (14.5 kg) Cylinder Cylinder diameter , in. (mm) 25.59 (650) Cylinder depth, in. (mm) 17.74 ...
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 52 5-08-51 Machine Dimensions - Model IWF030 (M-speed) 1 W arm Water Connections .75 in. 6 S team Con nections 2 Soft W ater Connections .75 in. 7 Drain V alve 3 Main Switch 8 Hard W ater Connections .7 5 in. 4 V entilation T ub 9 Liquid Soap Connections 5 E ...
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-51 53 Mounting Bolt Hole Locations - Model IWF030 (M-speed) CHM2167N Figure 31 CHM2167N 2.76 in. (70 mm) 25.2 in. (640 mm ) 10.24 in. (260 mm ) 1.1 in. (28 mm) 26.38 in. (670 mm ) 28.78 in. (731 mm) 16.14 in. (410 mm) 2.76 in. (70 mm) 30.71 in. (780 mm ...
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 54 5-08-51 Electrical Inst allati on Requirements - Model IWF030 (M-speed) Only trained personnel should perform this procedure. Use caution while servicing machines with covers removed and power applied. W700 WA R N I N G Boiler Fed/Steam Heat Electric Heat ...
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-51 55 Inst allation Models IWF014, IWF018, IWF025 and IWF030 (M-speed) Surface The machine must be securely fixed on a flat surface (metal base, co ncrete or so lid ground). The anchoring is to be done on the 6 provided places in the holes on the corne ...
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 56 5-08-51 Directly to Concrete Base The machine must be anchor ed directly to concrete base. Refer to Figur e 12 . Figure 34 IMPOR T ANT : Machine bolts should be re-checked on a quarterly basis. CHM2104N 1 Nut .5 in. (M12) (Models IWF014, IWF018 and IWF025 ...
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-51 57 S pecifications and Di mensions - Models IWF033 (M-speed) Capacity (dry weight) Ratio (kg/l) 1:1 1 28.88 lb. (13.1 kg) 1:10 31.96 lb. (14.5 kg) 1:9 35.49 lb. (16.1 kg) Cylinder Cylinder diameter , in. (mm) 26.77 (680) Cylinder depth, in. (mm) 17. ...
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 58 5-08-51 Machine Dimensions - Model IWF033 (M-speed) 1 W arm Water Connections .75 in. 6 Drain V alve 2 Soft W ater Connections .75 in. 7 S t eam Connections 3 Main Switch 8 Hard W ater Connections .7 5 in. 4 V entilation T ub 9 Liquid Soap Connections 5 E ...
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-51 59 Mounting Bolt Hole Locations - Model IWF033 (M-speed) CHM2168N Figure 36 2.76 in. (70 mm) 25.2 in. (640 mm) 10.24 in. (260 mm) 1.1 in. (28 mm) 26.38 in. (670 mm) 28.78 in. (731 mm) 16.14 in. (410 mm) 2.76 in. (70 mm) 30.71 in. (780 m m) ø0 .87 i ...
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 60 5-08-51 Electrical Inst allati on Requirements - Model IWF033 (M-speed) Only trained personnel should perform this procedure. Use caution while servicing machines with covers removed and power applied. W700 WA R N I N G Boiler Fed/Steam Heat Electric Heat ...
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-51 61 S pecifications and Dimensio ns - Model IW F040 (M-speed) Capacity (dry weight) Ratio (kg/l) 1:1 1 36.15 lb. (16.4 kg) 1:10 39.90 lb. (18.1 kg) 1:9 44.31 lb. (20.1 kg) Cylinder Cylinder diameter , in. (mm) 26.77 (680) Cylinder depth, in. (mm) 19. ...
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 62 5-08-51 Machine Dimensions - Model IWF040 (M-speed) 1 W arm Water Connection .75 in. 6 Drain V alve 2 Soft W ater Connections .75 in. 7 S t eam Connections 3 Main Switch 8 Hard W ater Connections .75 in. 4 V entilation T ub 9 Liquid Soap Connections 5 Ele ...
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-51 63 Mounting Bolt Hole Locations - Model IWF040 (M-speed) CHM2169N Figure 38 CHM2169N 1.3 in. (33 mm) 25.2 in. (640 mm) 1.1 in. (28 mm) 20.08 in. (510 mm) 30.31 in. (770 mm) 32.72 in. (831 mm) 10.24 in. (260 mm) 2.76 in. (70 mm) 30.71 in. (780 mm) ø ...
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 64 5-08-51 Electrical Inst allati on Requirements - Model IWF040 (M-speed) Only trained personnel should perform this procedure. Use caution while servicing machines with covers removed and power applied. W700 WA R N I N G Boiler Fed/Steam Heat Electric Heat ...
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-51 65 S pecifications and Dimensio ns - Model IW F055 (M-speed) Capacity (dry weight) Ratio (kg/l) 1:1 1 46.95 lb. (21.3 kg) 1:10 51.58 lb. (23.4 kg) 1:9 57.32 lb. (26 kg) Cylinder Cylinder diameter , in. (mm) 29.52 (750) Cylinder depth, in. (mm) 20.86 ...
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 66 5-08-51 Machine Dimensions - Model IWF055 (M-speed) 1 W arm Water Connections .75 in. 6 Drain V alve 2 Soft W ater Connections .75 in. 7 S t eam Connections 3 Main Switch. 8 Liquid Soap Connectio ns 4 V entilation T ub 9 Hard W ater Connections .75 in. 5 ...
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-51 67 Mounting Bolt Hole Locations - Model IWF055 (M-speed) CHM2170N Figure 40 CHM2170N 3.54 in. (90 mm) 26.77 in. (680 mm ) 1.97 in. 50 mm) 1.97 in. (50 mm) 1 1.1 in. (282 mm) 35.43 in. (900 mm) 20.39 in. (518 mm) 3.54 in. (90 mm) 33.86 in. (860 mm) ? ...
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 68 5-08-51 Electrical Inst allati on Requirements - Model IWF055 (M-speed) Only trained personnel should perform this procedure. Use caution while servicing machines with covers removed and power applied. W700 WA R N I N G Boiler Fed/Steam Heat Electric Heat ...
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-51 69 S pecifications and Dimensio ns - Model IW F075 (M-speed) Capacity (dry weight) Ratio (kg/l) 1:1 1 61.72 lb. (28 kg) 1:10 67.02 lb. (30.4 kg) 1:9 73.41 lb. (33.3 kg) Cylinder Cylinder diameter , in. (mm) 33.46 (850) Cylinder depth, in. (mm) 21.14 ...
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 70 5-08-51 Machine Dimensions - IWF075 (M-speed) 1 Hard W ater Connections .75 in. 6 Electrical Connections 2 W arm Water Connections .75 in. 7 Drain V alve 3 Soft W ater Connections .75 in. 8 S t eam Connections 4 Main Switch 9 Liquid Soap Connections 5 V e ...
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-51 71 Mounting Bolt Hole Locations - Model IWF075 (M-speed) CHM2171N Figure 42 CHM2171N 1.81 in. (46 mm) 33.46 in. (850 mm) 2.64 in. (67 mm) 22.44 i n. (570 mm) 40.55 in. (1030 mm) 2.76 in. (70 mm) 13.66 in. (347 mm) 2.76 in. (70 mm) 38.98 in. (990 mm) ...
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 72 5-08-51 Electrical Inst allati on Requirements - Model IWF075 (M-speed) Only trained personnel should perform this procedure. Use caution while servicing machines with covers removed and power applied. W700 WA R N I N G Boiler Fed/Steam Heat Electric Heat ...
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-51 73 Inst allation Models IWF033, IWF040, IWF055 and IWF075 (M-speed) Surface The machine must be securely fixed on a flat surface (metal base, co ncrete or so lid ground). The anchoring is to be done on the 6 provided places in the holes on the corne ...
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 74 5-08-51 Directly to Concrete Base The machine must be anchor ed directly to concrete base. Refer to Figur e 45 . Figure 45 IMPOR T ANT : Machine bolts should be re-checked on a quarterly basis. CHM2104N 1 Nut .625 in. (M16) 2 W asher 1.57 in. x 0.60 in. x ...
IPSO CHM2097Nのメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- CHM2097Nの取扱説明書
- IPSOの製品カード
- パンフレット
- またはIPSO CHM2097Nの消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、IPSO CHM2097Nの取扱説明書に含まれています。
取扱説明書と呼ばれる文書のグループは、IPSO CHM2097Nの取り付け説明書、サービスマニュアル、簡易説明書、またはIPSO CHM2097Nのユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、IPSO CHM2097Nの製品を使用するにあたって最も人気のある説明書を閲覧できます。
IPSO CHM2097Nデバイスの取扱説明書はどのようなものですか？
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがIPSO CHM2097Nを使用するのを助ける技術的文書のことです。説明書は通常、全てのIPSO CHM2097Nユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。
IPSOの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。
1. IPSO CHM2097Nの説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははIPSO CHM2097Nの目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。IPSO CHM2097Nに関してこのドキュメントで見つけることができる全てのヒントの目次
3. IPSO CHM2097Nデバイスの基本機能を使うにあたってのヒント。 IPSO CHM2097Nのユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。IPSO CHM2097Nに関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるIPSO CHM2097Nのメーカー/サービスへの連絡先に関する情報。
IPSO CHM2097Nについてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもIPSO CHM2097Nの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがIPSO CHM2097Nで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。