Bedienungsanleitung UltraViolet Devices V-Flex

16 Seiten 0.87 mb
Download

Zur Seite of 16

Summary
  • UltraViolet Devices V-Flex - page 1

    19 - 2021 Rev E , 0 6/05/ 07 1 V - Flex ® High Output UV Device INSTALLER/OWNER’S GU IDE Specifications subject to change without notice. ©Altru - V and V - Flex are brands owned by UVDI. Copyright © 2003 by UltraViolet Devices, Inc. All rights reserved. ...

  • UltraViolet Devices V-Flex - page 2

    19 - 2021 Rev E , 0 6/05/ 07 2 TABLE OF CONTENTS SPECIFICATIONS ........................................................................................................... 3 Electrical Ratings ....................................................................................................... 3 Approvals ......................................... ...

  • UltraViolet Devices V-Flex - page 3

    19 - 2021 Rev E , 0 6/05/ 07 3 SPECIFICATIONS Electrical Ratings Power Ratings Note: The V - Flex is a universa l input circuit capable of operation at 120 Vac or 240 Vac and 50Hz or 60Hz. The unit is designed to be hardwired to an appropriate electrical service in accordance with NEC. Temperature Ratings Ambient Temperature Range: 40°F to 135°F ...

  • UltraViolet Devices V-Flex - page 4

    19 - 2021 Rev E , 0 6/05/ 07 4 APPLICATION When installed in forced air heating and cooling systems, the V - Flex kills airborne and surface microorganism contaminants. It is designed to be mounted in - duct for airborne, “ on - the - fly” applications as well as surface irradiation applications. The design allows for many different levels of U ...

  • UltraViolet Devices V-Flex - page 5

    19 - 2021 Rev E , 0 6/05/ 07 5 Never look at the lamps while illuminated. Only view illumination by way of view port accessory. To prevent exposure to ultraviolet light, disconnect power to the V - Flex before servicing any part of the HVAC system. MOUNTING LOCATION CAUTION Equipment Damage Hazard Ultraviolet light can cause color shift or structur ...

  • UltraViolet Devices V-Flex - page 6

    19 - 2021 Rev E , 0 6/05/ 07 6 2. Determine the number and configuration of Lamp Modules and Power Junction Modules. Note: the maximum number of Lamp Modules (19 - 1000) to be installed per Power Junction Module (19 - 1020) is 24. 3. Mark the location of the lower mounting bracket on the lower mounting surface of the installation area. 4. Measure o ...

  • UltraViolet Devices V-Flex - page 7

    19 - 2021 Rev E , 0 6/05/ 07 7 8. Select one side of the Main Support to start assembly of lamp modules. Begin assembly of the Lamp Modules attachments first (see Figure 3b). Begin by installing the Lamp Module furthest from the Power Junction Module location. 9. Thread the t hree wires from the last Lamp Module installed to the main extrusion thro ...

  • UltraViolet Devices V-Flex - page 8

    19 - 2021 Rev E , 0 6/05/ 07 8 20. After installation of the last Lamp Module on the side opposite of the Power Junction Module, route the power wi res from the last Lamp Module installed through the feed through hole connecting the wire raceway from either side. Do not install lamps at this stage. (see Figure 3c for example of completely wired sys ...

  • UltraViolet Devices V-Flex - page 9

    19 - 2021 Rev E , 0 6/05/ 07 9 IMPORTANT It is a requirement to incorporate the w ire raceway covering to all exposed portions of the wire raceway on the mounting sides of the Main Support where modules have been mounted. 27. Identify, measure and record all spaces on the Main Support between Lamp Modules and the Power Junction Module (s ee Figure ...

  • UltraViolet Devices V-Flex - page 10

    19 - 2021 Rev E , 0 6/05/ 07 10 ELECTRICAL CONNECTION OF THE SYSTEM WARNING Personal Serious Injury Hazard Pow er supply can cause severe electrical shock. Disconnect power supply before installation. All wiring should be in accordance with NEC. 1. Bring power to the Power Junction Module and use appropriate knock - out on the Power Junction Module ...

  • UltraViolet Devices V-Flex - page 11

    19 - 2021 Rev E , 0 6/05/ 07 11 ...

  • UltraViolet Devices V-Flex - page 12

    19 - 2021 Rev E , 0 6/05/ 07 12 2. Insert the black V - Flex Clip into the module so that is holding the lamp in place and the clip is secured onto the metal module . Make sure the cli p is slid over the lamp module as shown below : 3. Push the lamp in till it snaps into place. V erify that lamp is retained. 4. Lamp should not have any slack to mov ...

  • UltraViolet Devices V-Flex - page 13

    19 - 2021 Rev E , 0 6/05/ 07 13 WARNING UV Light Hazard Harmful to bare skin and eyes. Can cause tempo rary or permanent loss of vision. Never look at the lamps while illuminated. Only view illumination by way of view port accessory. To prevent exposure to ultraviolet light, disconnect power to the V - Flex before servicing any part of the HVAC sys ...

  • UltraViolet Devices V-Flex - page 14

    19 - 2021 Rev E , 0 6/05/ 07 14 CAUTION UV Lamp Burn Hazard Harmful to bare skin. Can cause severe burns. Disconnect power 15 minutes before removing the ultraviolet lamp. WARNING UV Light Haza rd Harmful to bare skin and eyes. Can cause temporary or permanent loss of vision. Never look at the lamps while illuminated. Only view illumination by way ...

  • UltraViolet Devices V-Flex - page 15

    19 - 2021 Rev E , 0 6/05/ 07 15 3. Allow the lamp to cool for at least 15 minutes. 4. Depress lamp release button and remove lamp. Be careful not to stri ke or hit the lamp glass with the enclosure edges. 5. Insert new lamp into the Lamp Module. Depress lamp release button and insert lamp. Let go of the lamp release button and verify that lamp is r ...

  • UltraViolet Devices V-Flex - page 16

    19 - 2021 Rev E , 0 6/05/ 07 16 EQUIPMENT W ARRANTY UltraViolet Devices, Inc. (UVDI) , warrants to original Buyer for one year from the date of original installation, or eighteen (18) months from date of shipment, whichever comes first, that its goods are free from defect in material and workmanship under normal use and service. UVDI ’s obligatio ...

Produzent UltraViolet Devices Kategorie Network Card

Dokumente, die wir vom Produzenten des Geräts UltraViolet Devices V-Flex erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen UltraViolet Devices
- Bedienungsanleitungen V-Flex
- Produktkarten UltraViolet Devices
- Informationsbroschüren
- oder Energieetiketten UltraViolet Devices V-Flex
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung UltraViolet Devices V-Flex.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen UltraViolet Devices V-Flex, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen UltraViolet Devices V-Flex. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts UltraViolet Devices V-Flex ansehen.

Die komplette Bedienungsanleitung des Geräts UltraViolet Devices V-Flex, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von UltraViolet Devices V-Flex hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von UltraViolet Devices V-Flex verständlich ist.

Eine gänzliche Bedienungsanleitung von UltraViolet Devices sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von UltraViolet Devices V-Flex bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von UltraViolet Devices V-Flex befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich UltraViolet Devices V-Flex, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts UltraViolet Devices V-Flex - die uns die ersten Schritte während der Nutzung von UltraViolet Devices V-Flex erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit UltraViolet Devices V-Flex hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von UltraViolet Devices V-Flex im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich UltraViolet Devices V-Flex?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit UltraViolet Devices V-Flex nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit UltraViolet Devices V-Flex hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)