Bedienungsanleitung Icom IC-M2A

32 Seiten 0.61 mb
Download

Zur Seite of 32

Summary
  • Icom IC-M2A - page 1

    INSTRUCTION MANUAL iM2A VHF MARINE TRANSCEIVER This device complies with Part 15 of the FCC Rules. Operation is sub- ject to the follow two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. ...

  • Icom IC-M2A - page 2

    SAFETY TRAINING INFORMA TION Y our Icom radio generates RF electromagnetic energy during transmit mode. This radio is designed for and classified as “Occupational Use Only”, meaning it must be used only dur- ing the course of employment by individuals aware of the haz- ards, and the ways to minimize such hazards. This radio is NOT intended for ...

  • Icom IC-M2A - page 3

    ii IN CASE OF EMERGENCY If your vessel requires assistance, contact other vessels and the Coast Guard by sending a distress call on Channel 16. ❍ USING CHANNEL 16 DISTRESS CALL PROCEDURE 1. “MA YDA Y MA YDA Y MA YDA Y .” 2. “THIS IS ...........................” (name of vessel) 3. Y our call sign or other indication of the ves- sel. 4. ? ...

  • Icom IC-M2A - page 4

    iii FOREWORD Thank you for purchasing this Icom product. The IC-M2A VHF MARINE TRANSCEIVER is designed and built with Icom’ s su- perior technology and craftsmanship. With proper care this product should provide you with years of trouble-free operation. IMPOR T ANT READ ALL INSTRUCTIONS carefully and com- pletely before using the transceiver . SA ...

  • Icom IC-M2A - page 5

    CAUTIONS R W ARNING! NEVER connect the transceiver to an AC outlet. This may pose a fire hazard or result in an electric shock. R W ARNING! NEVER hold the transceiver so that the antenna is very close to, or touching exposed parts of the body , especially the face or eyes, while transmitting. The transceiver will perform best if the microphone is ...

  • Icom IC-M2A - page 6

    v SAFETY TRAINING INFORMA TION ................................... i IN CASE OF EMERGENCY ............................................... ii RECOMMENDA TION .......................................................... ii FOREWORD ...................................................................... iii IMPORT ANT .................................... ...

  • Icom IC-M2A - page 7

    1 1 OPERA TING RULES D Priorities • Read all rules and regulations pertaining to priorities and keep an up-to-date copy handy . Safety and distress calls take priority over all others. • Y ou must monitor Channel 16 when you are not operating on another channel. • False or fraudulent distress calls are prohibited under law . D Privacy • Inf ...

  • Icom IC-M2A - page 8

    2 2 P ANEL DESCRIPTION q CHANNEL/WEA THER CHANNEL SWITCH [CH/WX• U/I/C ] • Selects and toggles the regular channels and weather channel when pushed. (pgs. 6, 7) • Selects one of 3 regular channels in se- quence when pushed for 1 sec. (p. 6) - International, U.S.A. and Canadian channels are available. w CHANNEL UP/DOWN SWITCHES [ Y ]/[ Z ] • ...

  • Icom IC-M2A - page 9

    3 2 P ANEL DESCRIPTION CAUTION!: When attaching or releasing a battery pack, make sure the rubber seal is set in the groove of the battery pack/case correctly . If the seal is not neatly in the groove it may be damaged when attaching the battery pack/case. If the seal is damaged, waterproofing is not guaranteed. OPEN LOCK Screw position when remov ...

  • Icom IC-M2A - page 10

    4 2 P ANEL DESCRIPTION ■ Function display q TRANSMIT INDICA T OR (p. 8) Appears while transmitting. w BUSY INDICA T OR (p. 8) Appears when receiving a signal or when the squelch opens. e T AG CHANNEL INDICA TOR (p. 12) Appears when a tag channel is selected. r SCAN INDICA T OR (p. 12) Blinks while scanning. t CALL CHANNEL INDICA T OR (p. 6) Appea ...

  • Icom IC-M2A - page 11

    5 2 P ANEL DESCRIPTION o DUAL W A TCH/TRI-W A TCH INDICA TORS (p. 10) “ DUAL ” appears during dualwatch; “ TRI ” appears during tri-watch. !0 SUB CHANNEL READOUT • Indicates Channel 16 during priority scan. • Indicates Channel 16 during dualwatch or tri-watch. (p. 10) • Indicates the SET mode item while in SET mode !1 BA TTER Y INDICA ...

  • Icom IC-M2A - page 12

    D U.S.A., International and Canadian channels There are 57 U.S.A., 57 International and 61 Canadian chan- nels. These channel groups may be speci fi ed for the operat- ing area. q Push [CH/WX] to select a regular channel. - If a weather channel appears, push [CH/WX] again. w Push [ Y ]/[ Z ] switches to select a channel. - “ DUP ” appears for ...

  • Icom IC-M2A - page 13

    7 3 BASIC OPERA TION D W eather channels There are 10 weather channels. These are used for monitor- ing weather channels from the NOAA (National Oceano- graphic and Atmospheric Administration) broadcasts. The IC-M2A can detect a weather alert tone on the selected weather channel while scanning. See the “ SET mode items ” on p. 13. q Push [CH/WX ...

  • Icom IC-M2A - page 14

    8 q Rotate [OFF/VOL] clockwise to turn power ON. - Use the squelch function to mute any audio noise if necessary . Refer to the previous page for details. w Push* [SQL • MONI ] for 1 sec., and rotate volume to set audio output level. *According to Monitor action selection in SET mode (p. 14). e Push [ Y ]/[ Z ] to select the desired channel. - Wh ...

  • Icom IC-M2A - page 15

    9 3 BASIC OPERA TION ■ Call channel programming The call channel switch is used to select Channel 9 by de- fault, however , you can program your most often-used chan- nels in each channel group for quick recall. q Push [CH/WX • U/I/C ] for 1 sec. to select the desired channel group (USA, INT , CAN) to be programmed. w Push [16 • 9 ] for 1 sec ...

  • Icom IC-M2A - page 16

    10 4 DUAL W A TCH/TRI-W A TCH ■ Description Dualwatch monitors Channel 16 while you are receiving an- other channel; tri-watch monitors Channel 16 and the call channel while receiving another channel. DUAL W A TCH/TRI-W A TCH SIMULA TION • If a signal is received on Channel 16, dualwatch/tri-watch pauses on Channel 16 until the signal disappear ...

  • Icom IC-M2A - page 17

    11 5 SCAN OPERA TION ■ Scan types Scanning is an ef fi cient way to locate signals quickly over a wide frequency range. The transceiver has a priority scan and a normal scan. In addition, weather alert functions are available for standby convenience. (p. 13) Set the tag channels (channels to be scanned) before scan- ning. Clear the tag channels ...

  • Icom IC-M2A - page 18

    12 5 SCAN OPERA TION ■ Setting tag channels For more efficient scanning, add desired channels as tag channels or clear tag channels for unwanted channels. Chan- nels set as non-tag channels will be skipped during scanning. T ag channels can be assigned to each channel group (USA, INT , CAN) independently . q Select the desired channel group (USA, ...

  • Icom IC-M2A - page 19

    13 6 SET MODE Weather alert function OFF (default) Weather alert function ON ■ SET mode programming SET mode is used to change the conditions of 12 transceiver functions: beep tone, weather alert, scan type, scan resume timer , auto scan, monitor switch, automatic backlighting, LCD contrast, auto power save, self check, battery voltage and S/RF m ...

  • Icom IC-M2A - page 20

    D Priority scan function “ Pr ” The transceiver has 2 scan types. Normal scan and priority scan. Normal scan searches all tag channels in the selected channel group. Priority scan searches all tag channels in se- quence while monitoring Channel 16. D Scan resume timer “ St ” The scan resume timer can be selected as a pause (OFF) or timer sc ...

  • Icom IC-M2A - page 21

    15 6 SET MODE D Automatic backlighting “ bL ” This function is convenient for nighttime operation. The auto- matic backlighting turns the backlighting ON when pushing any key except for [PTT]. • The backlighting is automatically turned OFF after 5 sec. of inactivity . D LCD contrast selection “ LC ” The contrast of the LCD can be adjusted ...

  • Icom IC-M2A - page 22

    16 6 SET MODE D Battery voltage indicator “ bt ” This function contains display or non-display settings of the voltage of the connected battery pack when the power is ON. • The voltage of the connected battery pack is displayed for 2 sec. after power is turned ON. D S-meter/RF meter indicator “ Sr ” This function contains display or non-d ...

  • Icom IC-M2A - page 23

    17 7 BA TTER Y CHARGING ■ Battery charging Prior to using the transceiver for the fi rst time, the Ni-Cd bat- teries must be fully charged for optimum life and operation. • Recommended temperature range for charging: +50 ° F to +104 ° F (+10 ° C to +40 ° C) • Use the supplied AC adapter (BC-147A/E or BM-95V) only . NEVER use other adapte ...

  • Icom IC-M2A - page 24

    18 7 BA TTERY CHARGING ■ Installing batteries in the battery case (Not supplied with some versions) When using a battery case attached to the transceiver , install 6 × AA(R6) size alkaline batteries as illustrated below . q Remove the battery case from the transceiver . w Install 6 × AA(R6) size alkaline batteries. • Be sure to observe the co ...

  • Icom IC-M2A - page 25

    19 7 BA TTERY CHARGING D Rapid charging with the BC-121N+AD-103 The optional BC-121N allows up to 6 battery packs to be charged simultaneously . The following are additionally re- quired. • Six AD-103. • An AC adapter (BC-124) or the DC power cable (OPC-656). AC adapter (purchased separately) AD-103 charger adapters are installed in each slot. ...

  • Icom IC-M2A - page 26

    20 8 SUPPLIED ACCESSORIES AND A TT ACHMENTS D Supplied accessories The following accessories are supplied: Qty . q Flexible antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 w Swivel belt clip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 e Handstrap . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Icom IC-M2A - page 27

    e Insert the stopper to the back of the belt clip. Once the transceiver is locked in place, it will swivel 360 de- grees. 21 8 SUPPLIED ACCESSORIES AND A TT ACHMENTS D Swivel belt clip T o attach: q Slide the stopper into the plastic loop on the back of the transceiver . w Clip the belt clip to a part of your belt. ...

  • Icom IC-M2A - page 28

    22 8 SUPPLIED ACCESSORIES AND A TT ACHMENTS T o remove: q T urn the transceiver upside down, and then lift to release the transceiver from the belt clip. w Release the belt clip. e Push the top of the stopper towards the transceiver and out at the same time, then push it downwards and free of the plastic loop. R R CAUTION! HOLD THE TRANSCEIVER TIGH ...

  • Icom IC-M2A - page 29

    23 9 TROUBLESHOOTING PROBLEM POSSIBLE CAUSE SOLUTION . REF . No sound comes from the speaker . • Squelch level is too deep. • V olume level is too low . • Speaker has been exposed to water . p. 7 p. 8 — • Set squelch to the threshold point. • Set [OFF/VOL] to a suitable level. • Drain water from the speaker . No power comes ON. • Th ...

  • Icom IC-M2A - page 30

    24 CHANNEL LIST 10 Channel number USA CAN T ransmit Receive Frequency (MHz) INT Channel number Frequency (MHz) USA CAN T ransmit Receive INT Channel number Frequency (MHz) USA CAN T ransmit Receive INT Channel number Frequency (MHz) USA CAN T ransmit Receive INT WX channel Frequency (MHz) T ransmit Receive 01 156.050 160.650 01A 156.050 156.050 02 ...

  • Icom IC-M2A - page 31

    ■ Speci fi cations • GENERAL Frequency coverage : T ransmit 156.025 – 157.425 MHz Receive 156.050 – 163.275 MHz Mode : FM (16K0G3E) Channel spacing : 25 kHz Current drain (at 7.5 V DC) : TX High (5 W) 1.5 A typical. Max. audio 200 mA typical Power save 20 mA typical Frequency stability : ± 10 ppm ( – 20 ° C to +60 ° C) Useable tempera ...

  • Icom IC-M2A - page 32

    Count on us! 1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003 Japan A-61 13H-1EX- q Printed in Japan © 2001, 2002 Icom Inc. ...

Produzent Icom Kategorie Marine Radio

Dokumente, die wir vom Produzenten des Geräts Icom IC-M2A erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Icom
- Bedienungsanleitungen IC-M2A
- Produktkarten Icom
- Informationsbroschüren
- oder Energieetiketten Icom IC-M2A
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Icom IC-M2A.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Icom IC-M2A, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Icom IC-M2A. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Icom IC-M2A ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Icom IC-M2A, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Icom IC-M2A hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Icom IC-M2A verständlich ist.

Eine gänzliche Bedienungsanleitung von Icom sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Icom IC-M2A bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Icom IC-M2A befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Icom IC-M2A, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Icom IC-M2A - die uns die ersten Schritte während der Nutzung von Icom IC-M2A erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Icom IC-M2A hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Icom IC-M2A im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Icom IC-M2A?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Icom IC-M2A nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Icom IC-M2A hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)