日本語 dropdown-ico

Icom IC-M2Aの取扱説明書

32ページ 0.61 mb
ダウンロード

ページに移動 of 32

Summary
  • Icom IC-M2A - page 1

    INSTRUCTION MANUAL iM2A VHF MARINE TRANSCEIVER This device complies with Part 15 of the FCC Rules. Operation is sub- ject to the follow two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. ...

  • Icom IC-M2A - page 2

    SAFETY TRAINING INFORMA TION Y our Icom radio generates RF electromagnetic energy during transmit mode. This radio is designed for and classified as “Occupational Use Only”, meaning it must be used only dur- ing the course of employment by individuals aware of the haz- ards, and the ways to minimize such hazards. This radio is NOT intended for ...

  • Icom IC-M2A - page 3

    ii IN CASE OF EMERGENCY If your vessel requires assistance, contact other vessels and the Coast Guard by sending a distress call on Channel 16. ❍ USING CHANNEL 16 DISTRESS CALL PROCEDURE 1. “MA YDA Y MA YDA Y MA YDA Y .” 2. “THIS IS ...........................” (name of vessel) 3. Y our call sign or other indication of the ves- sel. 4. ? ...

  • Icom IC-M2A - page 4

    iii FOREWORD Thank you for purchasing this Icom product. The IC-M2A VHF MARINE TRANSCEIVER is designed and built with Icom’ s su- perior technology and craftsmanship. With proper care this product should provide you with years of trouble-free operation. IMPOR T ANT READ ALL INSTRUCTIONS carefully and com- pletely before using the transceiver . SA ...

  • Icom IC-M2A - page 5

    CAUTIONS R W ARNING! NEVER connect the transceiver to an AC outlet. This may pose a fire hazard or result in an electric shock. R W ARNING! NEVER hold the transceiver so that the antenna is very close to, or touching exposed parts of the body , especially the face or eyes, while transmitting. The transceiver will perform best if the microphone is ...

  • Icom IC-M2A - page 6

    v SAFETY TRAINING INFORMA TION ................................... i IN CASE OF EMERGENCY ............................................... ii RECOMMENDA TION .......................................................... ii FOREWORD ...................................................................... iii IMPORT ANT .................................... ...

  • Icom IC-M2A - page 7

    1 1 OPERA TING RULES D Priorities • Read all rules and regulations pertaining to priorities and keep an up-to-date copy handy . Safety and distress calls take priority over all others. • Y ou must monitor Channel 16 when you are not operating on another channel. • False or fraudulent distress calls are prohibited under law . D Privacy • Inf ...

  • Icom IC-M2A - page 8

    2 2 P ANEL DESCRIPTION q CHANNEL/WEA THER CHANNEL SWITCH [CH/WX• U/I/C ] • Selects and toggles the regular channels and weather channel when pushed. (pgs. 6, 7) • Selects one of 3 regular channels in se- quence when pushed for 1 sec. (p. 6) - International, U.S.A. and Canadian channels are available. w CHANNEL UP/DOWN SWITCHES [ Y ]/[ Z ] • ...

  • Icom IC-M2A - page 9

    3 2 P ANEL DESCRIPTION CAUTION!: When attaching or releasing a battery pack, make sure the rubber seal is set in the groove of the battery pack/case correctly . If the seal is not neatly in the groove it may be damaged when attaching the battery pack/case. If the seal is damaged, waterproofing is not guaranteed. OPEN LOCK Screw position when remov ...

  • Icom IC-M2A - page 10

    4 2 P ANEL DESCRIPTION ■ Function display q TRANSMIT INDICA T OR (p. 8) Appears while transmitting. w BUSY INDICA T OR (p. 8) Appears when receiving a signal or when the squelch opens. e T AG CHANNEL INDICA TOR (p. 12) Appears when a tag channel is selected. r SCAN INDICA T OR (p. 12) Blinks while scanning. t CALL CHANNEL INDICA T OR (p. 6) Appea ...

  • Icom IC-M2A - page 11

    5 2 P ANEL DESCRIPTION o DUAL W A TCH/TRI-W A TCH INDICA TORS (p. 10) “ DUAL ” appears during dualwatch; “ TRI ” appears during tri-watch. !0 SUB CHANNEL READOUT • Indicates Channel 16 during priority scan. • Indicates Channel 16 during dualwatch or tri-watch. (p. 10) • Indicates the SET mode item while in SET mode !1 BA TTER Y INDICA ...

  • Icom IC-M2A - page 12

    D U.S.A., International and Canadian channels There are 57 U.S.A., 57 International and 61 Canadian chan- nels. These channel groups may be speci fi ed for the operat- ing area. q Push [CH/WX] to select a regular channel. - If a weather channel appears, push [CH/WX] again. w Push [ Y ]/[ Z ] switches to select a channel. - “ DUP ” appears for ...

  • Icom IC-M2A - page 13

    7 3 BASIC OPERA TION D W eather channels There are 10 weather channels. These are used for monitor- ing weather channels from the NOAA (National Oceano- graphic and Atmospheric Administration) broadcasts. The IC-M2A can detect a weather alert tone on the selected weather channel while scanning. See the “ SET mode items ” on p. 13. q Push [CH/WX ...

  • Icom IC-M2A - page 14

    8 q Rotate [OFF/VOL] clockwise to turn power ON. - Use the squelch function to mute any audio noise if necessary . Refer to the previous page for details. w Push* [SQL • MONI ] for 1 sec., and rotate volume to set audio output level. *According to Monitor action selection in SET mode (p. 14). e Push [ Y ]/[ Z ] to select the desired channel. - Wh ...

  • Icom IC-M2A - page 15

    9 3 BASIC OPERA TION ■ Call channel programming The call channel switch is used to select Channel 9 by de- fault, however , you can program your most often-used chan- nels in each channel group for quick recall. q Push [CH/WX • U/I/C ] for 1 sec. to select the desired channel group (USA, INT , CAN) to be programmed. w Push [16 • 9 ] for 1 sec ...

  • Icom IC-M2A - page 16

    10 4 DUAL W A TCH/TRI-W A TCH ■ Description Dualwatch monitors Channel 16 while you are receiving an- other channel; tri-watch monitors Channel 16 and the call channel while receiving another channel. DUAL W A TCH/TRI-W A TCH SIMULA TION • If a signal is received on Channel 16, dualwatch/tri-watch pauses on Channel 16 until the signal disappear ...

  • Icom IC-M2A - page 17

    11 5 SCAN OPERA TION ■ Scan types Scanning is an ef fi cient way to locate signals quickly over a wide frequency range. The transceiver has a priority scan and a normal scan. In addition, weather alert functions are available for standby convenience. (p. 13) Set the tag channels (channels to be scanned) before scan- ning. Clear the tag channels ...

  • Icom IC-M2A - page 18

    12 5 SCAN OPERA TION ■ Setting tag channels For more efficient scanning, add desired channels as tag channels or clear tag channels for unwanted channels. Chan- nels set as non-tag channels will be skipped during scanning. T ag channels can be assigned to each channel group (USA, INT , CAN) independently . q Select the desired channel group (USA, ...

  • Icom IC-M2A - page 19

    13 6 SET MODE Weather alert function OFF (default) Weather alert function ON ■ SET mode programming SET mode is used to change the conditions of 12 transceiver functions: beep tone, weather alert, scan type, scan resume timer , auto scan, monitor switch, automatic backlighting, LCD contrast, auto power save, self check, battery voltage and S/RF m ...

  • Icom IC-M2A - page 20

    D Priority scan function “ Pr ” The transceiver has 2 scan types. Normal scan and priority scan. Normal scan searches all tag channels in the selected channel group. Priority scan searches all tag channels in se- quence while monitoring Channel 16. D Scan resume timer “ St ” The scan resume timer can be selected as a pause (OFF) or timer sc ...

  • Icom IC-M2A - page 21

    15 6 SET MODE D Automatic backlighting “ bL ” This function is convenient for nighttime operation. The auto- matic backlighting turns the backlighting ON when pushing any key except for [PTT]. • The backlighting is automatically turned OFF after 5 sec. of inactivity . D LCD contrast selection “ LC ” The contrast of the LCD can be adjusted ...

  • Icom IC-M2A - page 22

    16 6 SET MODE D Battery voltage indicator “ bt ” This function contains display or non-display settings of the voltage of the connected battery pack when the power is ON. • The voltage of the connected battery pack is displayed for 2 sec. after power is turned ON. D S-meter/RF meter indicator “ Sr ” This function contains display or non-d ...

  • Icom IC-M2A - page 23

    17 7 BA TTER Y CHARGING ■ Battery charging Prior to using the transceiver for the fi rst time, the Ni-Cd bat- teries must be fully charged for optimum life and operation. • Recommended temperature range for charging: +50 ° F to +104 ° F (+10 ° C to +40 ° C) • Use the supplied AC adapter (BC-147A/E or BM-95V) only . NEVER use other adapte ...

  • Icom IC-M2A - page 24

    18 7 BA TTERY CHARGING ■ Installing batteries in the battery case (Not supplied with some versions) When using a battery case attached to the transceiver , install 6 × AA(R6) size alkaline batteries as illustrated below . q Remove the battery case from the transceiver . w Install 6 × AA(R6) size alkaline batteries. • Be sure to observe the co ...

  • Icom IC-M2A - page 25

    19 7 BA TTERY CHARGING D Rapid charging with the BC-121N+AD-103 The optional BC-121N allows up to 6 battery packs to be charged simultaneously . The following are additionally re- quired. • Six AD-103. • An AC adapter (BC-124) or the DC power cable (OPC-656). AC adapter (purchased separately) AD-103 charger adapters are installed in each slot. ...

  • Icom IC-M2A - page 26

    20 8 SUPPLIED ACCESSORIES AND A TT ACHMENTS D Supplied accessories The following accessories are supplied: Qty . q Flexible antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 w Swivel belt clip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 e Handstrap . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Icom IC-M2A - page 27

    e Insert the stopper to the back of the belt clip. Once the transceiver is locked in place, it will swivel 360 de- grees. 21 8 SUPPLIED ACCESSORIES AND A TT ACHMENTS D Swivel belt clip T o attach: q Slide the stopper into the plastic loop on the back of the transceiver . w Clip the belt clip to a part of your belt. ...

  • Icom IC-M2A - page 28

    22 8 SUPPLIED ACCESSORIES AND A TT ACHMENTS T o remove: q T urn the transceiver upside down, and then lift to release the transceiver from the belt clip. w Release the belt clip. e Push the top of the stopper towards the transceiver and out at the same time, then push it downwards and free of the plastic loop. R R CAUTION! HOLD THE TRANSCEIVER TIGH ...

  • Icom IC-M2A - page 29

    23 9 TROUBLESHOOTING PROBLEM POSSIBLE CAUSE SOLUTION . REF . No sound comes from the speaker . • Squelch level is too deep. • V olume level is too low . • Speaker has been exposed to water . p. 7 p. 8 — • Set squelch to the threshold point. • Set [OFF/VOL] to a suitable level. • Drain water from the speaker . No power comes ON. • Th ...

  • Icom IC-M2A - page 30

    24 CHANNEL LIST 10 Channel number USA CAN T ransmit Receive Frequency (MHz) INT Channel number Frequency (MHz) USA CAN T ransmit Receive INT Channel number Frequency (MHz) USA CAN T ransmit Receive INT Channel number Frequency (MHz) USA CAN T ransmit Receive INT WX channel Frequency (MHz) T ransmit Receive 01 156.050 160.650 01A 156.050 156.050 02 ...

  • Icom IC-M2A - page 31

    ■ Speci fi cations • GENERAL Frequency coverage : T ransmit 156.025 – 157.425 MHz Receive 156.050 – 163.275 MHz Mode : FM (16K0G3E) Channel spacing : 25 kHz Current drain (at 7.5 V DC) : TX High (5 W) 1.5 A typical. Max. audio 200 mA typical Power save 20 mA typical Frequency stability : ± 10 ppm ( – 20 ° C to +60 ° C) Useable tempera ...

  • Icom IC-M2A - page 32

    Count on us! 1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003 Japan A-61 13H-1EX- q Printed in Japan © 2001, 2002 Icom Inc. ...

メーカー Icom カテゴリー Marine Radio

Icom IC-M2Aのメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- IC-M2Aの取扱説明書
- Icomの製品カード
- パンフレット
- またはIcom IC-M2Aの消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Icom IC-M2Aの取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Icom IC-M2Aの取り付け説明書、サービスマニュアル、簡易説明書、またはIcom IC-M2Aのユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Icom IC-M2Aの製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Icom IC-M2Aデバイスの取扱説明書はどのようなものですか？
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがIcom IC-M2Aを使用するのを助ける技術的文書のことです。説明書は通常、全てのIcom IC-M2Aユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Icomの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Icom IC-M2Aの説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははIcom IC-M2Aの目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Icom IC-M2Aに関してこのドキュメントで見つけることができる全てのヒントの目次
3. Icom IC-M2Aデバイスの基本機能を使うにあたってのヒント。 Icom IC-M2Aのユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Icom IC-M2Aに関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるIcom IC-M2Aのメーカー/サービスへの連絡先に関する情報。

Icom IC-M2Aについてご質問がありますか？

次のフォームを使用してください

見つけた説明書を読んでもIcom IC-M2Aの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがIcom IC-M2Aで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

Captcha
新しい画像

コメント (0)