Bedienungsanleitung Pelco C1666M-A (4/06)

20 Seiten 0.83 mb
Download

Zur Seite of 20

Summary
  • Pelco C1666M-A (4/06) - page 1

    INST ALLA TION TW3001AR Active Receiver Single Channel for UTP T ransmiss ion C1666M-A (4/06) ...

  • Pelco C1666M-A (4/06) - page 2

    ...

  • Pelco C1666M-A (4/06) - page 3

    C1666M-A (4/06) 3 Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water . 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Inst all in accordance with the manufacturer’ s instructions. 8. Do not install ...

  • Pelco C1666M-A (4/06) - page 4

    4 C1666M-A (4/06) Regulatory Notices This device complies with Part 15 of the FCC Rule s. Operation is subject to the following two conditions: (1) this device may not cause harmful in terference, and (2) this device must accept any interference received, including interfer ence that may cause undesired operation. RADIO AND TELEVISION INTERFERENCE ...

  • Pelco C1666M-A (4/06) - page 5

    C1666M-A (4/06) 5 Description The TW3001AR is a single-channel active receiver that can receive live video over unshielded twisted pair (UTP) cable. The adaptive technology in the TW3001AR automatical ly adjusts the low , medium and hig h frequency components of the video signal allowing for the best possibl e video transmission. The adaptive techn ...

  • Pelco C1666M-A (4/06) - page 6

    6 C1666M-A (4/06) PARTS OF THE RECEIVER Figure 1. TW3001AR Parts  Rubber Feet (4): For placing unit on a flat surfac e, such as a desk or shelf.  Status LED: Lights red when there is no UTP video bei ng received. Lights green when there is UTP video being received. Flashes a mber when Coaxitron pan/tilt /zoom (PTZ) control commands are being ...

  • Pelco C1666M-A (4/06) - page 7

    C1666M-A (4/06) 7 Installation Make sure all parts ar e present for the unit. 1 Universal power s upply (Part #PS04-1502-0512G) 1 Wall clip 1 2-pin power connector 1 2-pin UTP connector MOUNTING The TW3001AR receiver is 3 rack units hig h and can be mounted into a fiber rack, onto a wall using a fiber wall mount kit or in to the supplied wall clip. ...

  • Pelco C1666M-A (4/06) - page 8

    8 C1666M-A (4/06) USING A W ALL CLIP T o attach the TW3001AR receiver to a wall using t he supplied wall clip, refer to Figure 2 and do the following: 1. Attach the wall cl ip to a wall using two screws (not supplied). 2. Slide the receiver into the clip until the two holes on the bottom of the receiver align with the two holes on the lower flange ...

  • Pelco C1666M-A (4/06) - page 9

    C1666M-A (4/06) 9 SETTING THE DIP SWITCHES Y ou can override the adaptive technology by m anually adjusting switches 1 through 4 on the D IP Switch. The factory default switch positions are s hown in Figure 3. Switches 1 through 4 are set to AUTO and Switch 5 is set to H MODE (high mode). Figure 3. Default Switch Positions If you want to transmit v ...

  • Pelco C1666M-A (4/06) - page 10

    10 C1666M-A (4/06) APPLICATIONS Y ou can connect the TW3001AR active receiver to transmitters, such as the TW3001P passive trans- ceiver and the TW3001A T active transmitter , and to Pelco UTP ca meras, such as the CC3710/CC3610 Series. Although you can connect these products using an unshiel ded twisted pair Cat3 and Cat5 cable, Cat5e and Cat6 are ...

  • Pelco C1666M-A (4/06) - page 11

    C1666M-A (4/06) 11 Figure 4 shows a TW3001AR connected to a UTP Camclosure ® . Figure 4. TW3001AR Connected to a UTP Camclosure + - CAMCLOSURE TW3001AR UTP MONITOR 12 VDC OR 24 VAC POWER SUPPLY BLUE WIRE = GRAY WIRE = POWER FROM RK5000PS-3U OR ...

  • Pelco C1666M-A (4/06) - page 12

    12 C1666M-A (4/06) Figure 5 shows a TW3001AR connected to a UTP fixed camera. Figure 5. TW3001AR Connected to a UTP Fixed Camera + - TW3001AR FIXED CAMERA 8 PINS (4-/5+) MONITOR UTP PIN 5 + PIN 4 - 10 PINS (5-/6+) 12 VDC OR 24 VAC POWER SUPPLY POWER FROM RK5000PS-3U OR ...

  • Pelco C1666M-A (4/06) - page 13

    C1666M-A (4/06) 13 Figure 6 shows a TW3001AR connected to a UTP Spectra ® Dome for Coaxitron PTZ control. Figure 6. TW3001AR Connected to a Spectra Dome + - TW3001AR UTP VIDEO COAXITRON SPECTRA MONITOR MATRIX VC-UTP BOARD 12 VDC OR 24 VAC POWER SUPPLY POWER FROM RK5000PS-3U OR ...

  • Pelco C1666M-A (4/06) - page 14

    14 C1666M-A (4/06) Figure 7 shows a TW3001AR connected to a TW 3001P passive transceiver . The TW3001P then connects to a non-UTP fixed camera. Figure 7. TW3001AR Connected to a Single Passive T ransceiver + - TW3001AR TW3001P UTP MONITOR DIRECT CONNECTION FIXED CAMERA 12 VDC OR 24 VAC POWER SUPPLY POWER FROM RK5000PS-3U OR ...

  • Pelco C1666M-A (4/06) - page 15

    C1666M-A (4/06) 15 Figure 8 shows a TW3001AR connected to a TW3032P passive transceiver . Figure 8. TW3001AR Conn ected to a 32-Channel Passive T ransceiver + - TW3001AR TW3032P MONITOR UTP 12 VDC OR 24 VAC POWER SUPPLY POWER FROM RK5000PS-3U OR ...

  • Pelco C1666M-A (4/06) - page 16

    16 C1666M-A (4/06) Figure 9 shows a TW3001AR connected to a TW 3004P passive transceiver . The TW3004P then connects to a non-UTP fixed camera. Figure 9. TW3001AR Connected to a 4-Channel Passive T ransceiver + - TW3001AR TW3004P 1 2 3 4 UTP MONITOR FIXED CAMERA 12 VDC OR 24 VAC POWER SUPPLY POWER FROM RK5000PS-3U OR ...

  • Pelco C1666M-A (4/06) - page 17

    C1666M-A (4/06) 17 Specifications ELECTRICAL Input V oltage 12 VDC or 24 V AC, 50-60Hz Power Consumption 2.5 W Wire T ype Unshielded twis ted pair (24 AWG maximum) Wire Category Cat3 or better DC Loop Resistance 52 ohms per 1,000 feet Differential Capacitance 19pF/ft max T ransient Immunity 300 W peak pulse power (8/20 US) VIDEO CHARACTERISTICS Vid ...

  • Pelco C1666M-A (4/06) - page 18

    18 C1666M-A (4/06) ...

  • Pelco C1666M-A (4/06) - page 19

    PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merc handise proved defective in materi al or workma nship for a period of one year after the date of shipment. Exception s to this warrant y are as noted be low: • Five years on FR/F T/FS Series fiber optic pr oducts and TW300 0 Series unshielde d ...

  • Pelco C1666M-A (4/06) - page 20

    Worl dwide Headquarters 3500 Pelco W ay Clovis, California 93612 USA USA & Canada T el: 800/289-9100 Fax: 800/289-9150 International T el: 1-559/292-1981 Fax: 1-559/348-1120 www .pelco.com ISO 9001 Australia | Canada | Finland | France | Germany | Italy | Macau | The Netherlands | Russia | Singapore South Africa | Spain | Sweden | United Arab E ...

Produzent Pelco Kategorie Home Security System

Dokumente, die wir vom Produzenten des Geräts Pelco C1666M-A (4/06) erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Pelco
- Bedienungsanleitungen C1666M-A (4/06)
- Produktkarten Pelco
- Informationsbroschüren
- oder Energieetiketten Pelco C1666M-A (4/06)
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Pelco C1666M-A (4/06).

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Pelco C1666M-A (4/06), Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Pelco C1666M-A (4/06). Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Pelco C1666M-A (4/06) ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Pelco C1666M-A (4/06), wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Pelco C1666M-A (4/06) hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Pelco C1666M-A (4/06) verständlich ist.

Eine gänzliche Bedienungsanleitung von Pelco sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Pelco C1666M-A (4/06) bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Pelco C1666M-A (4/06) befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Pelco C1666M-A (4/06), die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Pelco C1666M-A (4/06) - die uns die ersten Schritte während der Nutzung von Pelco C1666M-A (4/06) erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Pelco C1666M-A (4/06) hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Pelco C1666M-A (4/06) im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Pelco C1666M-A (4/06)?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Pelco C1666M-A (4/06) nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Pelco C1666M-A (4/06) hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)