Deutsch dropdown-ico

Bedienungsanleitung Rosewill RC-400-LX

61 Seiten Betrifft nicht
Download

Zur Seite of 61

Summary
  • Rosewill RC-400-LX - page 1

    Gigabit PCI LAN Car d RC400-LX User Manual ...

  • Rosewill RC-400-LX - page 2

    Gigabit PCI Card RC400-LX User Manual 2 Features and Benefits z Integrated 10/10 0/1000 transceiver z Supports PCI 2.2, 32 bit bus, 33/66MHz z Fully compliant with IEEE 802.3 (10Base-T Ethern et), IEEE 802.3u (100Base-TX Fast Ethernet), IEEE 802.3z (1000Base-T Gigabit Ethernet) z Supports Ethernet 10Mbps (hal f- duplex), Ethernet 20Mbps (full-duple ...

  • Rosewill RC-400-LX - page 3

    Gigabit PCI Card RC400-LX User Manual 3 Hardwar e Installation Follow the inst ruction given below to install the Gigabit Et hernet PCI Card. 1. T urn your compu ter off and remove the power plug from the plug socket. 2. Remove the cover from the com puter case. 3. Remove the metal co ver plate on the rear of a free PCI slot. 4. Insert the c ard in ...

  • Rosewill RC-400-LX - page 4

    Gigabit PCI Card RC400-LX User Manual 4 For Windows® Vista In Windows® Vista, when the syst em is booted up i t automatically detects the Gigabi t Ethernet PCI Card and install the Gigabit Eth ernet PCI Car d with in-build driver s. Following is the proced ures fo r upgrading Gigabit Ethern et PCI Card driver under Wi ndows® Vista oper ating sys ...

  • Rosewill RC-400-LX - page 5

    Gigabit PCI Card RC400-LX User Manual 5 Networking Setti ngs 1. Click “Network Connect ion” in Contro l Panel to set your network settings. 2. Right-click the Local Area Co nnection used by the Gigabit Ether net PCI Card, then select “Pro perties” fr om th e pop-up menu. 3. Double-click the “Internet Protocol (TCP/IP )” item to set netw ...

  • Rosewill RC-400-LX - page 6

    Gigabit PCI Card RC400-LX User Manual 6 this card has not been in serted into the PC I slot correctly . Please i nsert the card firmly into the PC I slot or try another sl ot. How to deal wi th an exclamat ion point on Et hernet Host contr oller 1. Please shutdown yo ur computer and move the card to another available slot th en re-install Gigab it ...

  • Rosewill RC-400-LX - page 7

    Wireless N Adapter RNX-N150PCx User Manual Chapter 8 T roubleshooting ............................................................................................................................... ............................................. - 45 - - 7 - ...

  • Rosewill RC-400-LX - page 8

    Wireless N Adapter RNX-N250UBE User Manual Chapter 2 Installation Guide 2.1 Software Installation z Insert the Driver and Utility CD-ROM into the CD-ROM driver . z The Wizard should run automatically , and below window should appear . If not, click the Start button and choose Run . In the field that appears, enter D:autorun.exe (if ‘’D’ ’ ...

  • Rosewill RC-400-LX - page 9

    Wireless N Adapter RNX-N150PCx User Manual 1.3 Product Features  Complies with IEEE 802.11n (Draft 2.0), IEEE 802.11g, IEEE 802.11b standards  Provides 32-bit PCI interface  Provides 150Mbps recei ving rate and 150Mbps sending rate  Supports 20MHz/40MHz frequency width  Auto-detects and changes the network transmission rate  Provi ...

  • Rosewill RC-400-LX - page 10

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 9 - SOFTWA RE UNINST ALL Click My Computer icon, then click Add or Remove Pr ogram icon, and then click Ralink Wireless LAN icon and then click Remove icon. Click Y es, I want to restart my compu ter now icon, and then Finish icon. ...

  • Rosewill RC-400-LX - page 11

    ...

  • Rosewill RC-400-LX - page 12

    ...

  • Rosewill RC-400-LX - page 13

    ...

  • Rosewill RC-400-LX - page 14

    ...

  • Rosewill RC-400-LX - page 15

    Wireless N Adapter RNX-N250UBE User Manual After click “Add to Profile”, you will see the next wi ndow “Wireless Network Properties” popup with your current wireless signal’s setting. (RNX -N180PCe will detect the current setting of your SSID). So after the “Wireless Network Properties” popup, all you need to do is to enter the passwo ...

  • Rosewill RC-400-LX - page 16

    Wireless N Adapter RNX-N250UBE User Manual Chapter 4 Utility Configuration – Win XP’s Station Mode The Wireless Adapter provides two modes: Station mode and Access Point mode , the default is Station mode under Window XP. You can select connect wirelessly to your Wireless router/AP to connect to Internet in station mode. But in the Access Point ...

  • Rosewill RC-400-LX - page 17

    ...

  • Rosewill RC-400-LX - page 18

    ...

  • Rosewill RC-400-LX - page 19

    ...

  • Rosewill RC-400-LX - page 20

    ...

  • Rosewill RC-400-LX - page 21

    Wireless N Adapter RNX-N250UBE User Manual Import the new profile name in the popup window blank 4.2.5 Set default When you want to make one profile as a default wireless connection, you should select the profile and click Set default button. The wireless adapter will use this profile to connect to wireless network automatically when the utility ru ...

  • Rosewill RC-400-LX - page 22

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 21 - Figure 2-1-6 Network page Figure 2-1-7 Advance page ...

  • Rosewill RC-400-LX - page 23

    Wireless N Adapter RNX-N150PCx User Manual Figure 4-11 Note : you c ould also add a new profile quickly by selecting an available network in the “ Network ” function then press the “Add to Profile” button.  Adding to Profile through Profile Tab. (Figure 4-12) : 1. First select “ Add ” 2. Key in your desired Profile Name, eg, HOME. 3. ...

  • Rosewill RC-400-LX - page 24

    ...

  • Rosewill RC-400-LX - page 25

    ...

  • Rosewill RC-400-LX - page 26

    ...

  • Rosewill RC-400-LX - page 27

    ...

  • Rosewill RC-400-LX - page 28

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 27 - ICONS AND BUTTONS : Indicate connection is succes sful on curr ently activated pr ofile. Indicate connection is failed on curr ently activated pr ofile. Indicate network type is infrastructure mode. Indicate network type is Ad-hoc mode. Indicate security-enabled wir eless networ ...

  • Rosewill RC-400-LX - page 29

    ...

  • Rosewill RC-400-LX - page 30

    Wireless N Adapter RNX-N150PCx User Manual Rescan: Click to rescan the wireless networks. Information: Display the information about WPS IE on the selected network. List information includes Authentication Type, Encryption Type, Config Methods, Device Password ID, Selected Registrar, State, Version, AP Setup Locked, UUID-E and RF Bands. PIN Code: 8 ...

  • Rosewill RC-400-LX - page 31

    ...

  • Rosewill RC-400-LX - page 32

    Wireless N Adapter RNX-N150PCx User Manual Sub Mask : Sub mask about current connection. Default Gateway : Default gateway about current connection. Link Speed : Show current transmit rate and receive rate. Throughout : Display transmits and receive throughput in unit of Mbps. Link Quality : Display connection quality based on signal strength and T ...

  • Rosewill RC-400-LX - page 33

    ...

  • Rosewill RC-400-LX - page 34

    ...

  • Rosewill RC-400-LX - page 35

    Wireless N Adapter RNX-N150PCx User Manual - 35 - "EAP-MSCHAP v2", "EAPTLS/Smart card", "Generic Token Card", "CHAP", "MS-CHAP" , "MS-CHAP-V2", "PAP" and "EAP-MD5". Tunnel Identity : Identity for tunnel. Tunnel Password : Password for tunnel. Session Resumption : The us ...

  • Rosewill RC-400-LX - page 36

    Wireless N Adapter RNX-N150PCx User Manual 6.2.2 IDPassword Definition of Each Fields in 802.1X IDPassword: Figure 6-4 ID PASSWORD Authentication ID/Password : The identity, password and domain name for server. Only "EAP-FAST" and "LEAP" authentication can key in domain name. Domain names can be keyed in the blank space. Tun ...

  • Rosewill RC-400-LX - page 37

    ...

  • Rosewill RC-400-LX - page 38

    Wireless N Adapter RNX-N150PCx User Manual Chapter 7 Setup Examples Guide 7.1 WMM Setup Examples 7.1.1 Example to configure to Enable DLS (Direct Link Setup) 1. Click " WMM Enable " to enable this function 2. Click the " Direct Link Setup Enable " checkbox Figure 7-1 3. Click the Network Tab to switch to the wireless router sign ...

  • Rosewill RC-400-LX - page 39

    ...

  • Rosewill RC-400-LX - page 40

    ...

  • Rosewill RC-400-LX - page 41

    ...

  • Rosewill RC-400-LX - page 42

    ...

  • Rosewill RC-400-LX - page 43

    Wireless N Adapter RNX-N150PCx User Manual 6. When connect successfully. The result will be displayed as it is in the figure below. Figure 7-17 Note: WPS S tatus Bar Message:  WPS EAP process failed:  WPS configuration doesn't complete after two-minute connection  Receive EAP with wrong NONCE  Receive EAP without integrity  An i ...

  • Rosewill RC-400-LX - page 44

    ...

  • Rosewill RC-400-LX - page 45

    ...

  • Rosewill RC-400-LX - page 46

    Wireless N Adapter RNX-N150PCx User Manual - 46 - clients and access points. In Ad-Hoc mode, both wireless clients will need to have the sa me SSID. Please note that it might be necessary to set up one client to establish a BSS (Basic Service Set) and wait briefly before setti ng up other clients. This pr events several clients from trying to es ta ...

  • Rosewill RC-400-LX - page 47

    ...

  • Rosewill RC-400-LX - page 48

    ...

  • Rosewill RC-400-LX - page 49

    ...

  • Rosewill RC-400-LX - page 50

    ...

  • Rosewill RC-400-LX - page 51

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 50 - EXAMPLE TO CONFIGURE TO ENABLE DLS (DIRECT LINK SETUP) A. Click "Direct Link Setup Enable" ...

  • Rosewill RC-400-LX - page 52

    ...

  • Rosewill RC-400-LX - page 53

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 52 - B. Timeout V alue repr esents that it disconnect automatically after some s econds. The value is integer . The integer must be between 0~65535. It represents that it always connects if the va lue is zer o. D efault value of Timeout V alue is 60 seconds. ...

  • Rosewill RC-400-LX - page 54

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 53 - C. Click "Apply" button. The result will look like the below figure. Describe "DLS Status" as follow : A. As the up figur e, after configuring DLS successfully , show MAC addres s of the opposite side and Timeout V alue of setting in "DLS Status". I ...

  • Rosewill RC-400-LX - page 55

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 54 - B-2. Double click. And the result will look like the below figur e. C. Disconnect Dir ect Link Setup as follow : C-1. Select a direct link ST A. ...

  • Rosewill RC-400-LX - page 56

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 55 - C-2. Click "T ear Down" button. The r e sult will look like the below figure. ...

  • Rosewill RC-400-LX - page 57

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 56 - EXAMPLE TO CONFIGURE TO ENABLE WI-FI MUL TI-MEDIA If you want to use "WMM-Power Sav e" or "Direct L ink" you must enable WMM. The set ting method of enabling WMM indicates as follows: A. Click "WMM Enable". ...

  • Rosewill RC-400-LX - page 58

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 57 - B. Change to "Network" function. And add a AP that supports WMM features to a Profile. The r esult will look like the below figure in Pr ofile page. ...

  • Rosewill RC-400-LX - page 59

    ...

  • Rosewill RC-400-LX - page 60

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 59 - WPS Figure 2-7-1 shows WPS function of RaUI . The intr oduction indicates as follow: Figure 2-7-1 WPS function ...

  • Rosewill RC-400-LX - page 61

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 60 - A. WPS Configuration : The primary goal of Wi-Fi Protected Se tup (Wi-Fi Simple Configuration) is to simplify the security setup and management of Wi-Fi networks. Ralink ST A as an En rollee or external Registrar su pports the configuration setup using PIN configuration metho d ...

Produzent Rosewill Kategorie Network card

Dokumente, die wir vom Produzenten des Geräts Rosewill RC-400-LX erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Rosewill
- Bedienungsanleitungen RC-400-LX
- Produktkarten Rosewill
- Informationsbroschüren
- oder Energieetiketten Rosewill RC-400-LX
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Rosewill RC-400-LX.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Rosewill RC-400-LX, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Rosewill RC-400-LX. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Rosewill RC-400-LX ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Rosewill RC-400-LX, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Rosewill RC-400-LX hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Rosewill RC-400-LX verständlich ist.

Eine gänzliche Bedienungsanleitung von Rosewill sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Rosewill RC-400-LX bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Rosewill RC-400-LX befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Rosewill RC-400-LX, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Rosewill RC-400-LX - die uns die ersten Schritte während der Nutzung von Rosewill RC-400-LX erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Rosewill RC-400-LX hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Rosewill RC-400-LX im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Rosewill RC-400-LX?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Rosewill RC-400-LX nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Rosewill RC-400-LX hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Captcha
Neues Bild

Kommentare (0)