Español dropdown-ico

Manual de instrucciones Rosewill RC-400-LX

61 de páginas No relevante
Descargar

Pasar a la página of 61

Summary
  • Rosewill RC-400-LX - page 1

    Gigabit PCI LAN Car d RC400-LX User Manual ...

  • Rosewill RC-400-LX - page 2

    Gigabit PCI Card RC400-LX User Manual 2 Features and Benefits z Integrated 10/10 0/1000 transceiver z Supports PCI 2.2, 32 bit bus, 33/66MHz z Fully compliant with IEEE 802.3 (10Base-T Ethern et), IEEE 802.3u (100Base-TX Fast Ethernet), IEEE 802.3z (1000Base-T Gigabit Ethernet) z Supports Ethernet 10Mbps (hal f- duplex), Ethernet 20Mbps (full-duple ...

  • Rosewill RC-400-LX - page 3

    Gigabit PCI Card RC400-LX User Manual 3 Hardwar e Installation Follow the inst ruction given below to install the Gigabit Et hernet PCI Card. 1. T urn your compu ter off and remove the power plug from the plug socket. 2. Remove the cover from the com puter case. 3. Remove the metal co ver plate on the rear of a free PCI slot. 4. Insert the c ard in ...

  • Rosewill RC-400-LX - page 4

    Gigabit PCI Card RC400-LX User Manual 4 For Windows® Vista In Windows® Vista, when the syst em is booted up i t automatically detects the Gigabi t Ethernet PCI Card and install the Gigabit Eth ernet PCI Car d with in-build driver s. Following is the proced ures fo r upgrading Gigabit Ethern et PCI Card driver under Wi ndows® Vista oper ating sys ...

  • Rosewill RC-400-LX - page 5

    Gigabit PCI Card RC400-LX User Manual 5 Networking Setti ngs 1. Click “Network Connect ion” in Contro l Panel to set your network settings. 2. Right-click the Local Area Co nnection used by the Gigabit Ether net PCI Card, then select “Pro perties” fr om th e pop-up menu. 3. Double-click the “Internet Protocol (TCP/IP )” item to set netw ...

  • Rosewill RC-400-LX - page 6

    Gigabit PCI Card RC400-LX User Manual 6 this card has not been in serted into the PC I slot correctly . Please i nsert the card firmly into the PC I slot or try another sl ot. How to deal wi th an exclamat ion point on Et hernet Host contr oller 1. Please shutdown yo ur computer and move the card to another available slot th en re-install Gigab it ...

  • Rosewill RC-400-LX - page 7

    Wireless N Adapter RNX-N150PCx User Manual Chapter 8 T roubleshooting ............................................................................................................................... ............................................. - 45 - - 7 - ...

  • Rosewill RC-400-LX - page 8

    Wireless N Adapter RNX-N250UBE User Manual Chapter 2 Installation Guide 2.1 Software Installation z Insert the Driver and Utility CD-ROM into the CD-ROM driver . z The Wizard should run automatically , and below window should appear . If not, click the Start button and choose Run . In the field that appears, enter D:autorun.exe (if ‘’D’ ’ ...

  • Rosewill RC-400-LX - page 9

    Wireless N Adapter RNX-N150PCx User Manual 1.3 Product Features  Complies with IEEE 802.11n (Draft 2.0), IEEE 802.11g, IEEE 802.11b standards  Provides 32-bit PCI interface  Provides 150Mbps recei ving rate and 150Mbps sending rate  Supports 20MHz/40MHz frequency width  Auto-detects and changes the network transmission rate  Provi ...

  • Rosewill RC-400-LX - page 10

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 9 - SOFTWA RE UNINST ALL Click My Computer icon, then click Add or Remove Pr ogram icon, and then click Ralink Wireless LAN icon and then click Remove icon. Click Y es, I want to restart my compu ter now icon, and then Finish icon. ...

  • Rosewill RC-400-LX - page 11

    ...

  • Rosewill RC-400-LX - page 12

    ...

  • Rosewill RC-400-LX - page 13

    ...

  • Rosewill RC-400-LX - page 14

    ...

  • Rosewill RC-400-LX - page 15

    Wireless N Adapter RNX-N250UBE User Manual After click “Add to Profile”, you will see the next wi ndow “Wireless Network Properties” popup with your current wireless signal’s setting. (RNX -N180PCe will detect the current setting of your SSID). So after the “Wireless Network Properties” popup, all you need to do is to enter the passwo ...

  • Rosewill RC-400-LX - page 16

    Wireless N Adapter RNX-N250UBE User Manual Chapter 4 Utility Configuration – Win XP’s Station Mode The Wireless Adapter provides two modes: Station mode and Access Point mode , the default is Station mode under Window XP. You can select connect wirelessly to your Wireless router/AP to connect to Internet in station mode. But in the Access Point ...

  • Rosewill RC-400-LX - page 17

    ...

  • Rosewill RC-400-LX - page 18

    ...

  • Rosewill RC-400-LX - page 19

    ...

  • Rosewill RC-400-LX - page 20

    ...

  • Rosewill RC-400-LX - page 21

    Wireless N Adapter RNX-N250UBE User Manual Import the new profile name in the popup window blank 4.2.5 Set default When you want to make one profile as a default wireless connection, you should select the profile and click Set default button. The wireless adapter will use this profile to connect to wireless network automatically when the utility ru ...

  • Rosewill RC-400-LX - page 22

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 21 - Figure 2-1-6 Network page Figure 2-1-7 Advance page ...

  • Rosewill RC-400-LX - page 23

    Wireless N Adapter RNX-N150PCx User Manual Figure 4-11 Note : you c ould also add a new profile quickly by selecting an available network in the “ Network ” function then press the “Add to Profile” button.  Adding to Profile through Profile Tab. (Figure 4-12) : 1. First select “ Add ” 2. Key in your desired Profile Name, eg, HOME. 3. ...

  • Rosewill RC-400-LX - page 24

    ...

  • Rosewill RC-400-LX - page 25

    ...

  • Rosewill RC-400-LX - page 26

    ...

  • Rosewill RC-400-LX - page 27

    ...

  • Rosewill RC-400-LX - page 28

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 27 - ICONS AND BUTTONS : Indicate connection is succes sful on curr ently activated pr ofile. Indicate connection is failed on curr ently activated pr ofile. Indicate network type is infrastructure mode. Indicate network type is Ad-hoc mode. Indicate security-enabled wir eless networ ...

  • Rosewill RC-400-LX - page 29

    ...

  • Rosewill RC-400-LX - page 30

    Wireless N Adapter RNX-N150PCx User Manual Rescan: Click to rescan the wireless networks. Information: Display the information about WPS IE on the selected network. List information includes Authentication Type, Encryption Type, Config Methods, Device Password ID, Selected Registrar, State, Version, AP Setup Locked, UUID-E and RF Bands. PIN Code: 8 ...

  • Rosewill RC-400-LX - page 31

    ...

  • Rosewill RC-400-LX - page 32

    Wireless N Adapter RNX-N150PCx User Manual Sub Mask : Sub mask about current connection. Default Gateway : Default gateway about current connection. Link Speed : Show current transmit rate and receive rate. Throughout : Display transmits and receive throughput in unit of Mbps. Link Quality : Display connection quality based on signal strength and T ...

  • Rosewill RC-400-LX - page 33

    ...

  • Rosewill RC-400-LX - page 34

    ...

  • Rosewill RC-400-LX - page 35

    Wireless N Adapter RNX-N150PCx User Manual - 35 - "EAP-MSCHAP v2", "EAPTLS/Smart card", "Generic Token Card", "CHAP", "MS-CHAP" , "MS-CHAP-V2", "PAP" and "EAP-MD5". Tunnel Identity : Identity for tunnel. Tunnel Password : Password for tunnel. Session Resumption : The us ...

  • Rosewill RC-400-LX - page 36

    Wireless N Adapter RNX-N150PCx User Manual 6.2.2 IDPassword Definition of Each Fields in 802.1X IDPassword: Figure 6-4 ID PASSWORD Authentication ID/Password : The identity, password and domain name for server. Only "EAP-FAST" and "LEAP" authentication can key in domain name. Domain names can be keyed in the blank space. Tun ...

  • Rosewill RC-400-LX - page 37

    ...

  • Rosewill RC-400-LX - page 38

    Wireless N Adapter RNX-N150PCx User Manual Chapter 7 Setup Examples Guide 7.1 WMM Setup Examples 7.1.1 Example to configure to Enable DLS (Direct Link Setup) 1. Click " WMM Enable " to enable this function 2. Click the " Direct Link Setup Enable " checkbox Figure 7-1 3. Click the Network Tab to switch to the wireless router sign ...

  • Rosewill RC-400-LX - page 39

    ...

  • Rosewill RC-400-LX - page 40

    ...

  • Rosewill RC-400-LX - page 41

    ...

  • Rosewill RC-400-LX - page 42

    ...

  • Rosewill RC-400-LX - page 43

    Wireless N Adapter RNX-N150PCx User Manual 6. When connect successfully. The result will be displayed as it is in the figure below. Figure 7-17 Note: WPS S tatus Bar Message:  WPS EAP process failed:  WPS configuration doesn't complete after two-minute connection  Receive EAP with wrong NONCE  Receive EAP without integrity  An i ...

  • Rosewill RC-400-LX - page 44

    ...

  • Rosewill RC-400-LX - page 45

    ...

  • Rosewill RC-400-LX - page 46

    Wireless N Adapter RNX-N150PCx User Manual - 46 - clients and access points. In Ad-Hoc mode, both wireless clients will need to have the sa me SSID. Please note that it might be necessary to set up one client to establish a BSS (Basic Service Set) and wait briefly before setti ng up other clients. This pr events several clients from trying to es ta ...

  • Rosewill RC-400-LX - page 47

    ...

  • Rosewill RC-400-LX - page 48

    ...

  • Rosewill RC-400-LX - page 49

    ...

  • Rosewill RC-400-LX - page 50

    ...

  • Rosewill RC-400-LX - page 51

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 50 - EXAMPLE TO CONFIGURE TO ENABLE DLS (DIRECT LINK SETUP) A. Click "Direct Link Setup Enable" ...

  • Rosewill RC-400-LX - page 52

    ...

  • Rosewill RC-400-LX - page 53

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 52 - B. Timeout V alue repr esents that it disconnect automatically after some s econds. The value is integer . The integer must be between 0~65535. It represents that it always connects if the va lue is zer o. D efault value of Timeout V alue is 60 seconds. ...

  • Rosewill RC-400-LX - page 54

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 53 - C. Click "Apply" button. The result will look like the below figure. Describe "DLS Status" as follow : A. As the up figur e, after configuring DLS successfully , show MAC addres s of the opposite side and Timeout V alue of setting in "DLS Status". I ...

  • Rosewill RC-400-LX - page 55

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 54 - B-2. Double click. And the result will look like the below figur e. C. Disconnect Dir ect Link Setup as follow : C-1. Select a direct link ST A. ...

  • Rosewill RC-400-LX - page 56

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 55 - C-2. Click "T ear Down" button. The r e sult will look like the below figure. ...

  • Rosewill RC-400-LX - page 57

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 56 - EXAMPLE TO CONFIGURE TO ENABLE WI-FI MUL TI-MEDIA If you want to use "WMM-Power Sav e" or "Direct L ink" you must enable WMM. The set ting method of enabling WMM indicates as follows: A. Click "WMM Enable". ...

  • Rosewill RC-400-LX - page 58

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 57 - B. Change to "Network" function. And add a AP that supports WMM features to a Profile. The r esult will look like the below figure in Pr ofile page. ...

  • Rosewill RC-400-LX - page 59

    ...

  • Rosewill RC-400-LX - page 60

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 59 - WPS Figure 2-7-1 shows WPS function of RaUI . The intr oduction indicates as follow: Figure 2-7-1 WPS function ...

  • Rosewill RC-400-LX - page 61

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 60 - A. WPS Configuration : The primary goal of Wi-Fi Protected Se tup (Wi-Fi Simple Configuration) is to simplify the security setup and management of Wi-Fi networks. Ralink ST A as an En rollee or external Registrar su pports the configuration setup using PIN configuration metho d ...

Fabricante Rosewill Categoría Network card

Los documentos del dispositivo Rosewill RC-400-LX que obtenemos del fabricante se pueden dividir en varios grupos. Entre ellos están::
- dibujos técnicos Rosewill
- manuales de instrucciones RC-400-LX
- hojas de producto Rosewill
- folletos informativos
- o etiquetas energéticas Rosewill RC-400-LX
Todos son importantes, pero lo más importante desde el punto de vista del usuario de un dispositivo lo encontraremos en el manual de instrucciones Rosewill RC-400-LX.

Un conjunto de documentos determinado como manual de instrucciones se divide también en tipos más detallados, tales como: instrucciones de montaje Rosewill RC-400-LX, instrucciones de servicio, instrucciones cortas o instrucciones de usuario Rosewill RC-400-LX. Dependiendo de la situación debes buscar el documento que necesitas. En nuestra página puedes consultar el manual de instrucciones más popular del producto Rosewill RC-400-LX.

Manuales de instrucciones parecidos

El manual de instrucciones del dispositivo Rosewill RC-400-LX, ¿cómo debería ser?
El manual de instrucciones, también determinado como el manual de usuario o simplemente instrucciones, es un documento técnico que tiene como objetivo ayudar a los usuarios a utilizar Rosewill RC-400-LX. Las instrucciones normalmente las realiza un escritor técnico pero en un lenguaje comprensible para todos los usuarios de Rosewill RC-400-LX.

El manual de instrucciones completo de Rosewill debe contener unos elementos básicos. Una parte de ellos es menos importante, como por ejemplo: la portada / la página principal o las páginas de autor. Sin embargo, lo demás debe facilitarnos la información más importante desde el punto de vista del usuario.

1. Introducción y pistas sobre cómo orientarse con el manual Rosewill RC-400-LX - Al principio de cada manual se deben encontrar las indicaciones acerca de la manera de usar un manual de instrucciones. Debe contener información sobre dónde encontrar el índice Rosewill RC-400-LX, preguntas frecuentes o problemas más comunes – son los apartados más buscados por los usuarios de cada manual de instrucciones.
2. Índice - listados de todos los consejos acerca de Rosewill RC-400-LX que encontraremos en el documento
3. Consejos de uso de las funciones básicas del dispositivo Rosewill RC-400-LX - que deben facilitarnos los primeros pasos durante el uso de Rosewill RC-400-LX
4. Troubleshooting - una secuencia sistematizada de acciones que nos ayudará a diagnosticar los problemas más importantes con Rosewill RC-400-LX
5. FAQ - las preguntas frecuentes
6. Datos de contacto Información acerca de cómo encontrar los datos de contacto del fabricante / servicio de Rosewill RC-400-LX en cada país si no somos capaces de solucionar el problema por nuestra cuenta.

¿Tienes una pregunta acerca de Rosewill RC-400-LX?

Utiliza el formulario que se encuentra abajo

Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Rosewill RC-400-LX, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Rosewill RC-400-LX probablemente compartirá una forma de solucionarlo.

Copia el texto de la imagen

Captcha
Nueva imagen

Comentarios (0)