Bedienungsanleitung Tapco S8

16 Seiten 0.84 mb
Download

Zur Seite of 16

Summary
  • Tapco S8 - page 1

    ...

  • Tapco S8 - page 2

    2 SAFETY INSTRUCTIONS 1. Read Instructions — All the safety and operation instructions should be read before this product is operated. 2. Retain Instructions — The safety and operating instructions should be kept for future reference. 3. Heed W arnings — All war nings on this product and in these operating instructions should be followed. 4. ...

  • Tapco S8 - page 3

    Part No. 0008404 Rev. A 10/03 ©2003 LOUD T echnologies Inc. All Rights Reserved. 3 What me, read a manual? Before you begin, please make sure you read the Safety Instructions on page 2 and Getting Started on page 4. Y our new T APCO ® S•8 monitors are designed to set up quickly and operate easily. W e know it’s often seen as a sign of weaknes ...

  • Tapco S8 - page 4

    4 Getting Started The following steps will help you set up your monitor speakers quickly. Follow these steps for all the S•8 studio monitors in your system. INITIAL SETTINGS: 1. Turn the INPUT LEVEL control on the rear panel all the way down. 2. Set the HIGH FREQ and LOW FREQ switches to “0 (NORMAL).” 3. Turn the POWER switch OFF . CONNECTION ...

  • Tapco S8 - page 5

    BROUGHT TO YOU BY THE GROOVY FOLKS IN WOODINVILLE, WASHINGTON, USA MANUFACTURED IN CHINA • FABRIQUE AU CHINE ©2003 MACKIE DESIGNS, INC. 205323 C US R WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. DO NOT REMOVE COVER. NO USER SERVICEABLE P ARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONN ...

  • Tapco S8 - page 6

    6 Here’s a quick look at all the features packed into the S•8 Studio Monitors: • Flat frequency response (±3 dB, 40 Hz to 20 kHz) • 1” silk dome tweeter , fully magnetically shielded • 8” polypropylene cone woofer , fully magnetically shielded • Convenient compact design, per fect for near- fi eld monitoring • Ported, bass refl ...

  • Tapco S8 - page 7

    7 Hookup Diagrams Stereo Speak er Hookup Daisy-Chaining T w o Speakers Per Side Note: Use stereo 1/4” TRS plugs for the “Thru” connections. If you use mono 1/4” TS plugs, you will unbalance the XLR connections and suffer a drop in signal level of 6 dB. OFF XLR PHONO INPUTS SETTINGS INPUT LEVEL LOW FREQ FILTER HIGH FREQ FILTER 0 (NORMAL) – ...

  • Tapco S8 - page 8

    BROUGHT TO YOU BY THE GROOVY FOLKS IN WOODINVILLE, WASHINGTON, USA MANUFACTURED IN CHINA • FABRIQUE AU CHINE ©2003 MACKIE DESIGNS, INC. 205323 C US R WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. DO NOT REMOVE COVER. NO USER SERVICEABLE PAR TS INSIDE. REFER SERVICING T O QUALIFIED PERSON ...

  • Tapco S8 - page 9

    9 Get that sound level meter out. Decide what level you’re going to mix at and use the meter to help keep you mixing at that level. Y our ears will thank you, and your mixes will be better for it. 4. LOW FREQ Switch The LOW FREQ switch tailors the overall low-frequency response by +2 dB or +4 dB at 100 Hz and below. • For most applications, use ...

  • Tapco S8 - page 10

    10 Protection Circuits There are several protection mechanisms designed into the S•8 to safeguard the loudspeakers and amplifi ers from inadvertent damage. C A UTION: The protection circuits are designed to protect the loudspeakers under reasonable and sensible conditions. Should you choose to ignore the warning signs (i.e., frequent Clip LED in ...

  • Tapco S8 - page 11

    11 Appendix A: Service Infor mation No Sound • Is the power LED on the front panel illuminated? • Is the INPUT LEVEL control turned up? • Is the signal source turned up? Make sure the signal level from the mixing console (or whatever device immediately precedes the studio monitor) is high enough to produce sound. • If it’s a stereo pair , ...

  • Tapco S8 - page 12

    12 Repair Service for T APCO products is available at our factory, located in sunny W oodinville, W ashington. Service for T APCO products living outside the United States can be obtained through local dealers or distributors. If your monitor needs service, follow these instructions: 1. Review the preceding troubleshooting suggestions. Please. 2. C ...

  • Tapco S8 - page 13

    13 Appendix B: Connections XLR Connectors XLR connectors are used to make balanced connections to the S•8. They are wired as follows, according to standards specifi ed by the AES (Audio Engineering Society). XLR Balanced Wiring Pin 1 = Shield Pin 2 = Hot (+) Pin 3 = Cold (–) 1/4" TRS Phone Plugs and Jac ks “TRS” stands for T ip-Ring-S ...

  • Tapco S8 - page 14

    14 Appendix C: S•8 Specifi cations Equalization Low Frequency EQ: +2 dB/+4 dB @ 100 Hz, shelving High Frequency EQ: ±2 dB @ 5 kHz, shelving AC Power R e qu i re m e n ts US: 120 V AC, 60 Hz Europe: 240 V AC, 50 Hz Korea (AC Power Select at 240 V): 220 V AC, 60 Hz Japan (AC Power Select at 120 V): 100 V AC, 50/60 Hz AC Connector: 2-pin IEC 250 V ...

  • Tapco S8 - page 15

    15 T APCO LIMITED W ARRANTY A. LOUD T echnologies Inc. warrants all materials, workmanship and proper operation of this T APCO product for a period of one year from the original date of purchase. If any defects are found in the materials or workmanship, or if the product fails to function properly during the applicable warranty period, LOUD T echno ...

  • Tapco S8 - page 16

    tapcogear .com ©2003 LOUD T echnologies Inc. All rights reserved.“T APCO” and “Mackie.” are registered trademarks of LOUD Technologies Inc. ...

Produzent Tapco Kategorie Portable Speaker

Dokumente, die wir vom Produzenten des Geräts Tapco S8 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Tapco
- Bedienungsanleitungen S8
- Produktkarten Tapco
- Informationsbroschüren
- oder Energieetiketten Tapco S8
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Tapco S8.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Tapco S8, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Tapco S8. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Tapco S8 ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Tapco S8, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Tapco S8 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Tapco S8 verständlich ist.

Eine gänzliche Bedienungsanleitung von Tapco sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Tapco S8 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Tapco S8 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Tapco S8, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Tapco S8 - die uns die ersten Schritte während der Nutzung von Tapco S8 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Tapco S8 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Tapco S8 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Tapco S8?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Tapco S8 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Tapco S8 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)