Bedienungsanleitung Pelco FR8316

20 Seiten 0.38 mb
Download

Zur Seite of 20

Summary
  • Pelco FR8316 - page 1

    INST ALLA TION FT8316/FR8316 Fiber T ransmitter and Receiver Sixteen-Channel Digitally Encoded Video C2603M (6/06) ...

  • Pelco FR8316 - page 2

    ...

  • Pelco FR8316 - page 3

    C2603M (6/06) 3 Contents Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Regulatory Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Product Overview . . . . . . . . . . . . . . . . . . ...

  • Pelco FR8316 - page 4

    4 C2603M (6/06) Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near ...

  • Pelco FR8316 - page 5

    C2603M (6/06) 5 The product and/or manual may bear the following marks: This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit. This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit. CAUTION: RISK OF ELECTRIC SHOCK. DO NO ...

  • Pelco FR8316 - page 6

    6 C2603M (6/06) Regulatory Notices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RADIO AND TELEVISION INTERFERENCE This ...

  • Pelco FR8316 - page 7

    C2603M (6/06) 7 Product Overview DESCRIPTION The FT8316/FR8316 fi ber transmitter and receiver provide the ability to transmit up to 16 composite video channels over one optical fi ber (refer to Figure 1). Figure 1. Sixteen-Channel Video FT8316 T ransmitter and FR8316 Receiver Features of the FT8316/FR8316 fi ber optic transmission system includ ...

  • Pelco FR8316 - page 8

    8 C2603M (6/06) MODELS The FT8316/FR8316 fi ber transmitter and receiver consist of the following series of models: Multimode Models:* FT8316MSTR Sixteen-channel fiber optic video transmitter; multimode, ST connector FR8316MSTR Sixteen-channel fiber optic video receiver; multimode, ST connector Single-Mode Models:* FT8316SSTR Sixteen-channel fi ...

  • Pelco FR8316 - page 9

    C2603M (6/06) 9 FRONT PANEL The front panel of the FT8316 transmitter and FR8316 receiver provides LED indicators that a llow you to monitor signal status, laser status (transmitter only), and operating power. The following sections provide a view of the front panel of the transmitter and receiver. FRONT PANEL - FT8316 T RANSMITTER Figure 2 illustr ...

  • Pelco FR8316 - page 10

    10 C2603M (6/06) FRONT PANEL - FR8316 RECEIVER Figure 3 illustrates the front panel of the FR8316 receiver. Figure 3. Front Panel of FR8316 Receiver For detailed information about the front-panel indicators, refer to the T roubleshooting section.  VIDEO PRESENT LEDs 1-16  OPTIC FAUL T LED, optical signal status indicator, channels 1-8  OPT ...

  • Pelco FR8316 - page 11

    C2603M (6/06) 11 REAR PANEL Connections to the FT8316 transmitter and FR8316 receiver are made to the rear panel of the modules (refer to Figure 4). Figure 4. Rear Panel of FT8316 T ransmitter and FR8316 Receiver For additional information about rear-panel connections, refer to the Installation section.  RACK POWER/ALARM CONNECTOR, 4-pin connect ...

  • Pelco FR8316 - page 12

    12 C2603M (6/06) Installation PACKAGE CONTENTS The following items are supplied: 1 FT8316 transmitter or FR8316 receiver 1 Regulated switching power supply with either of the following: • Four plug adapters (North American, Australian, U.K., and European); 100-240 V AC, 50-60 Hz input, 12 VDC (25 W) output or • Three power cords (North American ...

  • Pelco FR8316 - page 13

    C2603M (6/06) 13 CONNECTIONS Connections to the FT8316 transmitter and FR8316 receiver are made on the rear panel of the modules and consist of the following: • Power connection NOTES: – A 12 VDC or 24 VAC power supply can be used to power the transmitter/receiver when used as a stand-alone module. A 12 VDC power supply is provided. If a 24 VAC ...

  • Pelco FR8316 - page 14

    14 C2603M (6/06) T roubleshooting LED indicators on the front panel of the FT8316 transmitter and FR8316 receiver (refer to Figure 2 and to Figure 3, respectively) allow you to monitor signal status , laser status (transmitter only), and operating power . T able A provides information about the front-panel indicators and associated troubleshooting ...

  • Pelco FR8316 - page 15

    C2603M (6/06) 15 Video Present LED (Continued) Red on receiver Incoming video signal is not present on the channel. Optical signal is not being received from the trans- mitter . Optic Fault LED is also red. Refer to the Optic Fault LED - Receiver section in this table. Video source is not powered on. Check power connection to the video source. Vide ...

  • Pelco FR8316 - page 16

    16 C2603M (6/06) Optic Fault LED - Receiver Green The optical signal is being received from the transmitter . – No action required. Red The optical signal is not being received from the transmitter . T ransmitter is not powered on. Check power connections. Replace power supply if necessary . Fiber optic cable is not connected. Check fiber optic ...

  • Pelco FR8316 - page 17

    C2603M (6/06) 17 Specifications VIDEO Number of Channels 16 Modulation T ype Pulse code modulation, 8-bit resolution Video Input (FT8316)/ 1.0 Vp-p, 75 ohms; NTSC, PAL, and SECAM Video Output (FR8316) Bandwidth 6.5 MHz Gain Unity Crosstalk -50 dB typical at 3.58 MHz Differential Gain <1% Differential Phase <1.2° T ilt <1% Signal-to-Noise ...

  • Pelco FR8316 - page 18

    18 C2603M (6/06) OPTICAL POWER BUDGET AND TRANSMISSION DIST ANCE Model No. Wavelength Optical Power Budget Maximum T ransmission Distance T ransmitter Compatible Receiver Multimode (62.5/125 µm) FT8316MSTR FR8316MSTR 1275 nm 1300 nm 18 dB* † 1 km (0.6 mi) ‡ Single-Mode (9/125 µm) FT8316SSTR FR8316SSTR 1275 nm 1300 nm 18 dB* 26 km (16.1 mi) § ...

  • Pelco FR8316 - page 19

    PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment. Exceptions to this warranty are as noted below: • Five years on FR/FT/FS Series fiber optic products and TW3000 Series unshielded twisted p ...

  • Pelco FR8316 - page 20

    Worldwide Headquarters 3500 Pelco Way Clovis, California 93612 USA USA & Canada T el: 800/289-9100 Fax: 800/289-9150 International T el: 1-559/292-1981 Fax: 1-559/348-1120 www.pelco.com ISO 9001 United States | Canada | United Kingdom | The Netherlands | Singapore | Spain | Scandinavia | France | Middle East ...

Produzent Pelco Kategorie Satellite Radio

Dokumente, die wir vom Produzenten des Geräts Pelco FR8316 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Pelco
- Bedienungsanleitungen FR8316
- Produktkarten Pelco
- Informationsbroschüren
- oder Energieetiketten Pelco FR8316
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Pelco FR8316.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Pelco FR8316, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Pelco FR8316. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Pelco FR8316 ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Pelco FR8316, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Pelco FR8316 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Pelco FR8316 verständlich ist.

Eine gänzliche Bedienungsanleitung von Pelco sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Pelco FR8316 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Pelco FR8316 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Pelco FR8316, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Pelco FR8316 - die uns die ersten Schritte während der Nutzung von Pelco FR8316 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Pelco FR8316 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Pelco FR8316 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Pelco FR8316?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Pelco FR8316 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Pelco FR8316 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)