Bedienungsanleitung Specialized 23A

12 Seiten 0.16 mb
Download

Zur Seite of 12

Summary
  • Specialized 23A - page 1

    1 2004 TURBO ® PRO CYCLOCOMPUTER Congratulations on your purchase! Y ou are now the owner of the world’ s most advanced cyclocomputer . Y our Specialized T urbo® Pro features a wireless speed transmitter and a wired cadence sensor . Additionally , it incorporates a revolutionar y new backlit three-line LCD screen. The large, easy to read, digit ...

  • Specialized 23A - page 2

    3 T urn the computer over so the display is facing downward. Use a coin to unthread the batter y cap from the computer . Install the batter y (model CR2032, Specialized P/N 481-3004) with the positive pole (+) facing upward. Carefully thread the batter y cap back onto the case with a coin. (See Figure 3) If, after batter y replacement, the LCD dis- ...

  • Specialized 23A - page 3

    the transmitter should be approximately 1/32 ” - 1/16 ” (1- 2mm). Tighten the magnet and transmitter . Do not over-tighten the magnet screw . (See figure 5). For wheels with bladed spokes: Use some isopropyl (rub- bing) alcohol or a mild detergent to thoroughly clean the spoke that you plan to attach the magnet to. Remove the backing from the a ...

  • Specialized 23A - page 4

    MODE/SET rocker switch. There are eight cycling modes available: 1) Clock Mode, 2) Distance Mode, 3) Speed Mode, 4) Timer Mode, 5) Cadence Mode, 6) Countdown Mode, 7) Altitude Mode and 8) T emperature Mode. Within each mode there is a side- mode that will allow you to access additional informa- tion such as average and maximum speeds. Use the “ S ...

  • Specialized 23A - page 5

    mode. T o enter a mileage into the odometer , press the “ MODE ” button until the flashing digit is correct. (Note: The “ MODE ” button may be held to quickly scroll to the correct digit.) Press the “ SET ” button to select the next digit to the right. Repeat this process until all five digits are entered as your existing mileage. (See ...

  • Specialized 23A - page 6

    11 variables such as inflation pressure, rim width and rider weight. 1. Extend a tape measure out to 3000mm (120 inch- es) and lock it in place. 2. With your tire inflated to its proper pressure, place the valve at the 6:00 position (at the bottom) directly over the start of the measuring tape. 3. Roll the wheel one com- plete revolution until the ...

  • Specialized 23A - page 7

    accept the hour selection. The minutes will flash and can be adjusted by press- ing the “ MODE ” button. (Hold the “ MODE ” button to scroll through the digits quickly) Press the “ SET ” button to set the minutes and return to clock mode 6. Timer Selection The T urbo ® Pro has two timers; Automatic Timer Mode (A TM) and Timer Mode (TIM ...

  • Specialized 23A - page 8

    until “ AL TI ” appears. Note: if your display says “ AL TI Ò” or “ %GRD ” , press the “ SET ” button to change to “ AL TI ” . Then press the “ SET ” button for three sec- onds. The first altitude digit will begin flashing. Press the “ MODE ” button until the desired number appears. Press the “ SET ” button once to ...

  • Specialized 23A - page 9

    Auto Star t/Stop Timer (A TM)- In A TM mode the timer function records the actual time spent riding. It oper- ates only when there is speed input and is dis- played In the Digital Display Area of the screen Timer Mode (TIMER)- In TIMER mode the stop- watch function will operate when the “ TOP ” button is pressed. The stopwatch will record the t ...

  • Specialized 23A - page 10

    T ech note: The inclinometer calculates percentage of grade by comparing the change in altitude to the distance traveled. This data is updated on the LCD dis- play ever y 5 seconds and is based upon data accu- mulated during the previ- ous 20 seconds. It is nor- mal to experience a slight delay when transitioning from one grade to another . T emper ...

  • Specialized 23A - page 11

    • Clean the unit with a mild detergent and a soft dr y cloth. Never use any kind of solvent or alcohol. • The T urbo ® Pro computer is intended for use on bicy- cles only and should not be used on any motorized vehicle. SPECIFICA TIONS: Current Speed: 0.0 to 99.90 MPH 0.0 to 99.90 Km/H Average Speed (A VS) 0.0 to 199.9 MPH 0.0 to 199.9 Km/H Ma ...

  • Specialized 23A - page 12

    T urbo® is a registered trade- mark of Specialized Bicycle Components Inc. © 2003 Specialized Bicycle Components Inc. WWW .SPECIALIZED.COM City, UT 84104, USA. Attn: Turbo ® Pro Warranty. Be sure to include a letter indicating the spe- cific reasons for returning the product and proof of date of pur- chase. This warranty does not apply to, and i ...

Produzent Specialized Kategorie Cyclometer

Dokumente, die wir vom Produzenten des Geräts Specialized 23A erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Specialized
- Bedienungsanleitungen 23A
- Produktkarten Specialized
- Informationsbroschüren
- oder Energieetiketten Specialized 23A
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Specialized 23A.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Specialized 23A, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Specialized 23A. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Specialized 23A ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Specialized 23A, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Specialized 23A hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Specialized 23A verständlich ist.

Eine gänzliche Bedienungsanleitung von Specialized sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Specialized 23A bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Specialized 23A befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Specialized 23A, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Specialized 23A - die uns die ersten Schritte während der Nutzung von Specialized 23A erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Specialized 23A hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Specialized 23A im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Specialized 23A?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Specialized 23A nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Specialized 23A hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)