English dropdown-ico

Manual Specialized 23A

12 pages 0.16 mb
Download

Go to site of 12

Summary
  • Specialized 23A - page 1

    1 2004 TURBO ® PRO CYCLOCOMPUTER Congratulations on your purchase! Y ou are now the owner of the world’ s most advanced cyclocomputer . Y our Specialized T urbo® Pro features a wireless speed transmitter and a wired cadence sensor . Additionally , it incorporates a revolutionar y new backlit three-line LCD screen. The large, easy to read, digit ...

  • Specialized 23A - page 2

    3 T urn the computer over so the display is facing downward. Use a coin to unthread the batter y cap from the computer . Install the batter y (model CR2032, Specialized P/N 481-3004) with the positive pole (+) facing upward. Carefully thread the batter y cap back onto the case with a coin. (See Figure 3) If, after batter y replacement, the LCD dis- ...

  • Specialized 23A - page 3

    the transmitter should be approximately 1/32 ” - 1/16 ” (1- 2mm). Tighten the magnet and transmitter . Do not over-tighten the magnet screw . (See figure 5). For wheels with bladed spokes: Use some isopropyl (rub- bing) alcohol or a mild detergent to thoroughly clean the spoke that you plan to attach the magnet to. Remove the backing from the a ...

  • Specialized 23A - page 4

    MODE/SET rocker switch. There are eight cycling modes available: 1) Clock Mode, 2) Distance Mode, 3) Speed Mode, 4) Timer Mode, 5) Cadence Mode, 6) Countdown Mode, 7) Altitude Mode and 8) T emperature Mode. Within each mode there is a side- mode that will allow you to access additional informa- tion such as average and maximum speeds. Use the “ S ...

  • Specialized 23A - page 5

    mode. T o enter a mileage into the odometer , press the “ MODE ” button until the flashing digit is correct. (Note: The “ MODE ” button may be held to quickly scroll to the correct digit.) Press the “ SET ” button to select the next digit to the right. Repeat this process until all five digits are entered as your existing mileage. (See ...

  • Specialized 23A - page 6

    11 variables such as inflation pressure, rim width and rider weight. 1. Extend a tape measure out to 3000mm (120 inch- es) and lock it in place. 2. With your tire inflated to its proper pressure, place the valve at the 6:00 position (at the bottom) directly over the start of the measuring tape. 3. Roll the wheel one com- plete revolution until the ...

  • Specialized 23A - page 7

    accept the hour selection. The minutes will flash and can be adjusted by press- ing the “ MODE ” button. (Hold the “ MODE ” button to scroll through the digits quickly) Press the “ SET ” button to set the minutes and return to clock mode 6. Timer Selection The T urbo ® Pro has two timers; Automatic Timer Mode (A TM) and Timer Mode (TIM ...

  • Specialized 23A - page 8

    until “ AL TI ” appears. Note: if your display says “ AL TI Ò” or “ %GRD ” , press the “ SET ” button to change to “ AL TI ” . Then press the “ SET ” button for three sec- onds. The first altitude digit will begin flashing. Press the “ MODE ” button until the desired number appears. Press the “ SET ” button once to ...

  • Specialized 23A - page 9

    Auto Star t/Stop Timer (A TM)- In A TM mode the timer function records the actual time spent riding. It oper- ates only when there is speed input and is dis- played In the Digital Display Area of the screen Timer Mode (TIMER)- In TIMER mode the stop- watch function will operate when the “ TOP ” button is pressed. The stopwatch will record the t ...

  • Specialized 23A - page 10

    T ech note: The inclinometer calculates percentage of grade by comparing the change in altitude to the distance traveled. This data is updated on the LCD dis- play ever y 5 seconds and is based upon data accu- mulated during the previ- ous 20 seconds. It is nor- mal to experience a slight delay when transitioning from one grade to another . T emper ...

  • Specialized 23A - page 11

    • Clean the unit with a mild detergent and a soft dr y cloth. Never use any kind of solvent or alcohol. • The T urbo ® Pro computer is intended for use on bicy- cles only and should not be used on any motorized vehicle. SPECIFICA TIONS: Current Speed: 0.0 to 99.90 MPH 0.0 to 99.90 Km/H Average Speed (A VS) 0.0 to 199.9 MPH 0.0 to 199.9 Km/H Ma ...

  • Specialized 23A - page 12

    T urbo® is a registered trade- mark of Specialized Bicycle Components Inc. © 2003 Specialized Bicycle Components Inc. WWW .SPECIALIZED.COM City, UT 84104, USA. Attn: Turbo ® Pro Warranty. Be sure to include a letter indicating the spe- cific reasons for returning the product and proof of date of pur- chase. This warranty does not apply to, and i ...

Manufacturer Specialized Category Cyclometer

Documents that we receive from a manufacturer of a Specialized 23A can be divided into several groups. They are, among others:
- Specialized technical drawings
- 23A manuals
- Specialized product data sheets
- information booklets
- or energy labels Specialized 23A
All of them are important, but the most important information from the point of view of use of the device are in the user manual Specialized 23A.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Specialized 23A, service manual, brief instructions and user manuals Specialized 23A. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Specialized 23A.

Similar manuals

A complete manual for the device Specialized 23A, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Specialized 23A by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Specialized 23A.

A complete Specialized manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Specialized 23A - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Specialized 23A, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Specialized 23A, that we can find in the current document
3. Tips how to use the basic functions of the device Specialized 23A - which should help us in our first steps of using Specialized 23A
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Specialized 23A
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Specialized 23A in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Specialized 23A?

Use the form below

If you did not solve your problem by using a manual Specialized 23A, ask a question using the form below. If a user had a similar problem with Specialized 23A it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)