Bedienungsanleitung Patton electronic 1075

24 Seiten 1.8 mb
Download

Zur Seite of 24

Summary
  • Patton electronic 1075 - page 1

    USER MANUAL MODEL 1075 KiloModem II AC Powered, High-Speed X.21 Short-Range Modem SALES OFFICE (301) 975-1000 TECHNICAL SUPPORT (301) 975-1007 http://www .patton.com Part #07M1075-B Doc: 054081U , Rev. C Revised 1/23/08 CERTIFIED An ISO-9001 Certified Company ...

  • Patton electronic 1075 - page 2

    1.0 W ARRANTY INFORMA TION Patton Electronics warrants all Model 1075 components to be free from defects, and will—at our option—repair or replace the product should it fail within one year from the first date of shipment. This warranty is limited to defects in workmanship or materials, and does not cover customer damage, abuse or unauthorized ...

  • Patton electronic 1075 - page 3

    1.0 W ARRANTY INFORMA TION Patton Electronics warrants all Model 1075 components to be free from defects, and will—at our option—repair or replace the product should it fail within one year from the first date of shipment. This warranty is limited to defects in workmanship or materials, and does not cover customer damage, abuse or unauthorized ...

  • Patton electronic 1075 - page 4

    2.0 GENERAL INFORMA TION Thank you for your purchase of this Patton Electronics product. This product has been thoroughly inspected and tested and is warranted for One Y ear parts and labor . If any questions or problems arise during installation or use of this product, please do not hesitate to contact Patton Electronics Customer Service at (301) ...

  • Patton electronic 1075 - page 5

    2.0 GENERAL INFORMA TION Thank you for your purchase of this Patton Electronics product. This product has been thoroughly inspected and tested and is warranted for One Y ear parts and labor . If any questions or problems arise during installation or use of this product, please do not hesitate to contact Patton Electronics Customer Service at (301) ...

  • Patton electronic 1075 - page 6

    Switches S2-1 and S2-2: Data Rate Switches S2-1 and S2-2 are set in combination to determine the synchronous data rate for the Model 1075. S2-1 S2-2 Setting Off On 32 kbps On Off 56 kbps On On 64 kbps Switches S2-3 and S2-4: System Clock Mode The setting for switches S2-3 and S2-4 determines the transmitter clocking mode for the Model 1075. S2-3 S2 ...

  • Patton electronic 1075 - page 7

    Switches S2-1 and S2-2: Data Rate Switches S2-1 and S2-2 are set in combination to determine the synchronous data rate for the Model 1075. S2-1 S2-2 Setting Off On 32 kbps On Off 56 kbps On On 64 kbps Switches S2-3 and S2-4: System Clock Mode The setting for switches S2-3 and S2-4 determines the transmitter clocking mode for the Model 1075. S2-3 S2 ...

  • Patton electronic 1075 - page 8

    3.2 CONFIGURA TION STRAPS In addition to the configuration switches described above, the Model 1075 is also equipped with two internal straps that set the DTE/DCE Configuration and the DB-15 Shield. In order to configure these straps, you must open the Model 1075 case. NOTE: Before opening the case, determine whether the default settings are correc ...

  • Patton electronic 1075 - page 9

    3.2 CONFIGURA TION STRAPS In addition to the configuration switches described above, the Model 1075 is also equipped with two internal straps that set the DTE/DCE Configuration and the DB-15 Shield. In order to configure these straps, you must open the Model 1075 case. NOTE: Before opening the case, determine whether the default settings are correc ...

  • Patton electronic 1075 - page 10

    3.2.4 Setting the JP1 Shield Strap The setting of JP1 determines whether the shield (pin 1) of the X.21 interface is connected signal ground. In the default setting, DB-15 shield is connected to signal ground. The X.21 shield is not connected to signal ground when the jumper is placed on pins 1 and 2 . See Figure 7, below . Jumper 1: DB15 Shield Po ...

  • Patton electronic 1075 - page 11

    3.2.4 Setting the JP1 Shield Strap The setting of JP1 determines whether the shield (pin 1) of the X.21 interface is connected signal ground. In the default setting, DB-15 shield is connected to signal ground. The X.21 shield is not connected to signal ground when the jumper is placed on pins 1 and 2 . See Figure 7, below . Jumper 1: DB15 Shield Po ...

  • Patton electronic 1075 - page 12

    4.3 AC POWER CONNECTIONS Power is supplied to the Model 1075 by a 9 VDC, 1 A wall mount transformer . This transformer connects to the Model 1075 by means of a cannon jack on the rear panel. The Model 1075 is powered-up as soon as it is plugged into an AC outlet–there is no power switch. 120 V AC Power (US) The 120 V AC adapter supplied with the ...

  • Patton electronic 1075 - page 13

    4.3 AC POWER CONNECTIONS Power is supplied to the Model 1075 by a 9 VDC, 1 A wall mount transformer . This transformer connects to the Model 1075 by means of a cannon jack on the rear panel. The Model 1075 is powered-up as soon as it is plugged into an AC outlet–there is no power switch. 120 V AC Power (US) The 120 V AC adapter supplied with the ...

  • Patton electronic 1075 - page 14

    5.2 TEST MODES The Model 1075 offers two V .54 test modes to evaluate the condition of the modems and the communication link. These tests are activated from the front panel. 5.2.1 Local Analog Loopback (LAL) The Local Analog Loopback (LAL) test checks the operation of the local Model 1075, and is performed separately on each unit. Any data sent to ...

  • Patton electronic 1075 - page 15

    5.2 TEST MODES The Model 1075 offers two V .54 test modes to evaluate the condition of the modems and the communication link. These tests are activated from the front panel. 5.2.1 Local Analog Loopback (LAL) The Local Analog Loopback (LAL) test checks the operation of the local Model 1075, and is performed separately on each unit. Any data sent to ...

  • Patton electronic 1075 - page 16

    C. If the BER test equipment indicates a fault, and the Local Analog Loopback test was successful for both Model 1075s, you may have a problem with the twisted pair line between the modems. Y ou should then check the twisted pair line for proper connections and continuity . 5.2.3 How to Use the V .52 BER T est Independently The V .52 BER test can b ...

  • Patton electronic 1075 - page 17

    C. If the BER test equipment indicates a fault, and the Local Analog Loopback test was successful for both Model 1075s, you may have a problem with the twisted pair line between the modems. Y ou should then check the twisted pair line for proper connections and continuity . 5.2.3 How to Use the V .52 BER T est Independently The V .52 BER test can b ...

  • Patton electronic 1075 - page 18

    APPENDIX B MODEL 1075 F ACTOR Y REPLACEMENT P ARTS AND ACCESSORIES Patton Model # Description 1075 ................................KiloModem II X.21 Short Range Modem 0805B ..............................120V W all Mount AC Adapter 08059DCI ........................230V AC Adapter (No Power Cord) 0805US ...........................American Power Cord ...

  • Patton electronic 1075 - page 19

    APPENDIX B MODEL 1075 F ACTOR Y REPLACEMENT P ARTS AND ACCESSORIES Patton Model # Description 1075 ................................KiloModem II X.21 Short Range Modem 0805B ..............................120V W all Mount AC Adapter 08059DCI ........................230V AC Adapter (No Power Cord) 0805US ...........................American Power Cord ...

  • Patton electronic 1075 - page 20

    19 Dear V alued Customer , Thank you for purchasing Patton Electronics products! W e do appreciate your business. I trust that you find this user manual helpful. W e manufacture one of the widest selections of data communications products in the world including CSU/DSU's, network termination units, powered and self-powered short range modems, ...

  • Patton electronic 1075 - page 21

    ...

  • Patton electronic 1075 - page 22

    ...

  • Patton electronic 1075 - page 23

    ...

  • Patton electronic 1075 - page 24

    19 Dear V alued Customer , Thank you for purchasing Patton Electronics products! W e do appreciate your business. I trust that you find this user manual helpful. W e manufacture one of the widest selections of data communications products in the world including CSU/DSU's, network termination units, powered and self-powered short range modems, ...

Produzent Patton electronic Kategorie Modem

Dokumente, die wir vom Produzenten des Geräts Patton electronic 1075 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Patton electronic
- Bedienungsanleitungen 1075
- Produktkarten Patton electronic
- Informationsbroschüren
- oder Energieetiketten Patton electronic 1075
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Patton electronic 1075.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Patton electronic 1075, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Patton electronic 1075. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Patton electronic 1075 ansehen.

Die komplette Bedienungsanleitung des Geräts Patton electronic 1075, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Patton electronic 1075 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Patton electronic 1075 verständlich ist.

Eine gänzliche Bedienungsanleitung von Patton electronic sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Patton electronic 1075 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Patton electronic 1075 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Patton electronic 1075, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Patton electronic 1075 - die uns die ersten Schritte während der Nutzung von Patton electronic 1075 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Patton electronic 1075 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Patton electronic 1075 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Patton electronic 1075?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Patton electronic 1075 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Patton electronic 1075 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)